- 您現在的位置：買賣IC網 > PDF目錄384633 > LTC2351CUH-14 (LINEAR TECHNOLOGY CORP) Channel, 14-Bit, 1.5Msps Simultaneous Sampling ADC with Shutdown PDF資料下載
參數資料
| 型號： | LTC2351CUH-14 |
| 廠商： | LINEAR TECHNOLOGY CORP |
| 元件分類： | ADC |
| 英文描述： | Channel, 14-Bit, 1.5Msps Simultaneous Sampling ADC with Shutdown |
| 中文描述： | 6-CH 14-BIT PROPRIETARY METHOD ADC, SERIAL ACCESS, PQCC32 |
| 封裝： | 5 X 5 MM, PLASTIC, MO-220WHHD, QFN-32 |
| 文件頁數： | 18/20頁 |
| 文件大小： | 279K |
| 代理商： | LTC2351CUH-14 |
18
LTC2351-14
235114f
APPLICATIOU
W
U
U
High quality tantalum and ceramic bypass capacitors should
be used at the V
CC
, V
DD
and V
REF
pins as shown in the
Block Diagram on the first page of this data sheet. For
optimum performance, a 10
μ
F surface mount tantalum
capacitor with a 0.1
μ
F ceramic is recommended for the
V
CC
, V
DD
and V
REF
pins. Alternatively, 10
μ
F ceramic chip
capacitors such as X5R or X7R may be used. The capaci-
tors must be located as close to the pins as possible. The
traces connecting the pins and the bypass capacitors must
be kept short and should be made as wide as possible. The
V
CC
and V
DD
bypass capacitor returns to the ground plane
and the V
REF
bypass capacitor returns to the Pin 22. Care
should be taken to place the 0.1
μ
F V
CC
and V
DD
bypass
capacitor as close to Pins 24 and 25 as possible.
Figure 6 shows the recommended system ground connec-
tions. All analog circuitry grounds should be terminated at
the LTC2351-14 Exposed Pad. The ground return from the
LTC2351-14 to the power supply should be low imped-
ance for noise-free operation. The Exposed Pad of the 32-
pin QFN package is also internally tied to the ground pads.
The Exposed Pad should be soldered on the PC board to
reduce ground connection inductance. All ground pins
(GND, DGND, OGND) must be connected directly to the
same ground plane under the LTC2351-14.
HARDWARE INTERFACE TO TMS320C54x
The LTC2351-14 is a serial output ADC whose interface
has been designed for high speed buffered serial ports in
fast digital signal processors (DSPs). Figure 7 shows an
example of this interface using a TMS320C54X.
The buffered serial port in the TMS320C54x has direct
access to a 2kB segment of memory. The ADC’s serial
data can be collected in two alternating 1kB segments, in
real time, at the full 1.5Msps conversion rate of the
LTC2351-14. The DSP assembly code sets frame sync
mode at the BFSR pin to accept an external positive going
pulse and the serial clock at the BCLKR pin to accept an
external positive edge clock. Buffers near the LTC2351-14
may be added to drive long tracks to the DSP to prevent
corruption of the signal to LTC2351-14. This configura-
tion is adequate to traverse a typical system board, but
source resistors at the buffer outputs and termination
resistors at the DSP, may be needed to match the charac-
teristic impedance of very long transmission lines. If you
need to terminate the SDO transmission line, buffer it first
with one or two 74ACxx gates. The TTL threshold inputs of
the DSP port respond properly to the 3V swing used with
the LTC2351-14.
Figure 6. Recommended Layout
V
DD
BYPASS,
0.1
μ
F, 0402
OV
DD
BYPASS,
0.1
μ
F, 0402
V
REF
BYPASS,
μ
F, 0805
V
CC
BYPASS,
0.1
μ
F, 0402 AND
10
μ
F, 0805
235114 F06
3
30
32
1
2
3-WIRE SERIAL
INTERFACE LINK
OV
DD
CONV
SCK
LTC2351-14
SDO
V
CC
BFSR
BCLKR
TMS320C54x
BDR
OGND
31
DGND
CONV
CLK
0V TO 3V LOGIC SWING
5V
3V
B13
B12
Figure 7. DSP Serial Interface to TMS320C54x
相關PDF資料 |
PDF描述 |
|---|---|
| LTC2351-14 | Channel, 14-Bit, 1.5Msps Simultaneous Sampling ADC with Shutdown |
| LTC2351IUH-14 | Channel, 14-Bit, 1.5Msps Simultaneous Sampling ADC with Shutdown |
| LTC2421 | 1-/2-Channel 20-Bit UPower No Latency ADCs in MSOP-10 |
| LTC2422 | 1-/2-Channel 20-Bit UPower No Latency ADCs in MSOP-10 |
| LTUX | 1-/2-Channel 20-Bit UPower No Latency ADCs in MSOP-10 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LTC2351CUH-14#PBF | 功能描述:IC ADC 14BIT 1.5MSPS 32-QFN RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 其它有關文件:TSA1204 View All Specifications 標準包裝:1 系列:- 位數:12 采樣率（每秒）:20M 數據接口:并聯 轉換器數目:2 功率耗散（最大）:155mW 電壓電源:模擬和數字 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:48-TQFP 供應商設備封裝:48-TQFP（7x7） 包裝:Digi-Reel® 輸入數目和類型:4 個單端，單極；2 個差分，單極 產品目錄頁面:1156 (CN2011-ZH PDF) 其它名稱:497-5435-6 |
| LTC2351CUH-14#TRPBF | 功能描述:IC ADC 14BIT 1.5MSPS 32-QFN RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:12 采樣率（每秒）:300k 數據接口:并聯 轉換器數目:1 功率耗散（最大）:75mW 電壓電源:單電源 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:24-SOIC（0.295"，7.50mm 寬） 供應商設備封裝:24-SOIC 包裝:帶卷 (TR) 輸入數目和類型:1 個單端，單極；1 個單端，雙極 |
| LTC2351HUH-12#PBF | 功能描述:IC ADC 12BIT 1.5MSPS 32-QFN RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:12 采樣率（每秒）:300k 數據接口:并聯 轉換器數目:1 功率耗散（最大）:75mW 電壓電源:單電源 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:24-SOIC（0.295"，7.50mm 寬） 供應商設備封裝:24-SOIC 包裝:帶卷 (TR) 輸入數目和類型:1 個單端，單極；1 個單端，雙極 |
| LTC2351HUH-12#TRPBF | 功能描述:IC ADC 12BIT 1.5MSPS 32-QFN RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:12 采樣率（每秒）:300k 數據接口:并聯 轉換器數目:1 功率耗散（最大）:75mW 電壓電源:單電源 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:24-SOIC（0.295"，7.50mm 寬） 供應商設備封裝:24-SOIC 包裝:帶卷 (TR) 輸入數目和類型:1 個單端，單極；1 個單端，雙極 |
| LTC2351HUH-14#PBF | 功能描述:IC ADC 14BIT 1.5MSPS 32-QFN RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 其它有關文件:TSA1204 View All Specifications 標準包裝:1 系列:- 位數:12 采樣率（每秒）:20M 數據接口:并聯 轉換器數目:2 功率耗散（最大）:155mW 電壓電源:模擬和數字 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:48-TQFP 供應商設備封裝:48-TQFP（7x7） 包裝:Digi-Reel® 輸入數目和類型:4 個單端，單極；2 個差分，單極 產品目錄頁面:1156 (CN2011-ZH PDF) 其它名稱:497-5435-6 |
發布緊急采購，3分鐘左右您將得到回復。