參數資料
型號: LSN-2.5/16-D12HJ-C
廠商: CD TECHNOLOGIES INC
元件分類: 電源模塊
英文描述: 1-OUTPUT 40 W DC-DC REG PWR SUPPLY MODULE
封裝: ROHS COMPLIANT, PACKAGE-11
文件頁數: 6/12頁
文件大?。?/td> 206K
代理商: LSN-2.5/16-D12HJ-C
Physical
Outline Dimensions
See Mechanical Specications
Pin Dimensions/Material
0.03" (0.76mm) round copper with tin-lead
plate over nickel underplate
Weight
0.3 ounces (9g)
Flammability Rating
UL94V-0
EMI Conducted and Radiated
FCC Part 15, EN55022 may require
external lter
Safety
UL/cUL 60950, CSA-C22.2 No.234
IEC/EN 60950
LSN-16A D12 Series
NON-ISOLA TED , 13-80W SIP DC/DC CONVER TERS
3
Performance/Functional Specications
Typical @ TA = +25°C under nominal line voltage and full-load conditions unless noted.
TECHNICAL
NOTES
Input Voltage:
Continuous or transient
14Vdc maximum
On/Off Control (Pin 11)
+VIN
Input Reverse-Polarity Protection
None
Output Overvoltage Protection
None
Output Current
Current limited. Devices can
withstand sustained output short
circuits without damage.
Storage Temperature
–55 to +125°C
Lead Temperature (soldering, 10 sec.)
+300°C, 10 seconds maximum.
Refer to solder prole.
These are stress ratings. Exposure of devices to any of these conditions may adversely
affect long-term reliability. Proper operation under conditions other than those listed in the
Performance/Functional Specications Table is not implied.
Absolute Maximum Ratings
Return Current Paths
The LSN D12 SIP’s are non-isolated DC/DC converters. Their two Common
pins (pins 5 and 6) are connected to each other internally (see Figure 1). To
the extent possible (with the intent of minimizing ground loops), input return
current should be directed through pin 6 (also referred to as –Input or
Input Return), and output return current should be directed through pin 5
(also referred to as –Output or Output Return). Any on/off control signals
applied to pin 11 (On/Off Control) should be referenced to Common
(specically pin 6).
I/O Filtering and Noise Reduction
All models in the LSN D12 Series are tested and specied with external
22F tantalum input and output capacitors. These capacitors are necessary
to accommodate our test equipment and may not be required to achieve?
desired performance in your application. The LSN D12's are designed with
high-quality, high-performance internal I/O caps, and will operate within spec
in most applications with no additional external components.
Input
Input Voltage Range
10-14 Volts (12V nominal)
Input Current:
Normal Operating Conditions
See Ordering Guide
Standby/Off Mode
5.7mA
Output Short-Circuit Condition
30-60mA
Input Reected Ripple Current
30-100mAp-p
Input Filter Type
Capacitive
Start-Up Voltage
9 Volts
Overvoltage Protection
None
Reverse-Polarity Protection
None
Undervoltage Shutdown
8 Volts
No-load Input Current
50-80mA
Remote On/Off Control
–Negative Logic
ON = no connection or open
(internal pull down), 0 to +0.4V
OFF = +2.8V to +VIN or pulled high
Remote Control On/Off Current
3mA maximum
Output
Voltage Output Accuracy (50% load)
±1.25% maximum
Minimum Loading
No minimum load
Maximum Output Power
See Ordering Guide
VOUT x IOUT must not exceed max. power
Maximum Capacitive Loading
2,000F (low ESR, OSCON) or
10,000F (electrolytic)
VOUT Trim Range
±10%
Sense Input Range
+10% of VOUT
Ripple/Noise (20 MHz bandwidth)
See Ordering Guide
Total Accuracy
±3% over line, load and temperature
Efciency
See Ordering Guide
Overcurrent Detection and
Short Circuit Protection
Current-limiting Detection
23-29 Amps
Short Circuit Detection
98% of VOUT setting
Short Circuit Protection Method
Hiccup with autorecovery
See Technical Notes
Short Circuit Current
270-600mA (model dependent)
Short Circuit Duration
Continuous, output shorted to ground
Temperature Coefcient
±0.02% per °C
Dynamic Characteristics
Transient Response
(50 to 100% load step to ±2% of Vout)
50sec typical, 100sec maximum
Start-Up Time On/Off to VOUT
20msec for VOUT = nominal
Switching Frequency
230-370kHz (model dependent)
Environmental
Calculated MTBF
TBD Hours
Operating Temperature: (Ambient)
No derating, vertical mount
–40 to +53°C, natural convection
With derating
See derating curves
Storage Temperature Range
–55 to +125°C
Thermal Protection/Shutdown
115°C
Density Altitude
0 to 10,000 feet
Relative Humidity
10% to 90%, non-condensing
All models are tested and specied with external 22F tantalum input and output capacitors.
These capacitors are necessary to accommodate our test equipment and may not be required
to achieve specied performance in your applications. All models are stable and regulate within
spec under no-load conditions.
Input Ripple Current is tested and specied over a 5-20MHz bandwidth. Input ltering is
CIN = 200F, CBUS = 1000F, LBUS = 1H.
Current limit inception is given at either cold start-up or after warm-up.
Mean Time Before Failure is calculated using the Telcordia (Bellcore) SR-332 Method 1, Case 3,
ground xed conditions, TCASE = +25°C, full load, natural convection, +67°C max. PCB temp.
The On/Off Control (pin 11) may be driven with open-collector logic or by applying appropriate
external voltages which are referenced to Common, pins 5 and 6.
Short circuit shutdown begins when the output voltage degrades approximately 2% from the
selected setting.
相關PDF資料
PDF描述
LSN-1/10-D12BJ 1-OUTPUT 10 W DC-DC REG PWR SUPPLY MODULE
LSN-1.2/10-D12BH 1-OUTPUT DC-DC REG PWR SUPPLY MODULE
LSN-1.5/10-D12 1-OUTPUT DC-DC REG PWR SUPPLY MODULE
LSN-2.5/10-D12H 1-OUTPUT DC-DC REG PWR SUPPLY MODULE
LSN-1.5/10-D12J 1-OUTPUT DC-DC REG PWR SUPPLY MODULE
相關代理商/技術參數
參數描述
LSN2A 制造商:MURATA 制造商全稱:Murata Manufacturing Co., Ltd. 功能描述:Non-isolated, DOSA-SIP, 6/10/16A Selectable-Output DC/DC Converters
LSN2B 功能描述:限位開關 LIMIT SWITCH RoHS:否 制造商:Honeywell 觸點形式:SPDT 執行器:Non-Contact 電流額定值:30 mA 電壓額定值 AC: 電壓額定值 DC:3.6 V 工作力:10 g IP 等級:IP 67 NEMA 額定值:1, 4, 12, 13 端接類型:4-Pin M12 Connector 安裝:SMD/SMT
LSN2-T 制造商:MURATA 制造商全稱:Murata Manufacturing Co., Ltd. 功能描述:DOSA-SIP, 30A POL DC/DC Converters
LSN2-T/10-C 制造商:CANDD 制造商全稱:C&D Technologies 功能描述:Non-isolated, DOSA-SIP, 6/10/16A Selectable-Output DC/DC Converters
LSN2-T/10-D12 制造商:CANDD 制造商全稱:C&D Technologies 功能描述:Non-isolated, DOSA-SIP, 6/10/16A Selectable-Output DC/DC Converters