參數資料
型號： ISP1130DL
廠商： NXP SEMICONDUCTORS
元件分類： 微控制器/微處理器
英文描述： Universal Serial Bus compound hub with integrated keyboard controller
中文描述： SPECIALTY MICROPROCESSOR CIRCUIT, PDSO56
封裝： PLASTIC, SSOP-56
文件頁數： 38/68頁
文件大?。?/td> 1786K
代理商： ISP1130DL
Philips Semiconductors
ISP1130
USB compound hub with keyboard controller
Objective specification
Rev. 01 — 23 March 2000
38 of 68
9397 750 06895
Philips Electronics N.V. 2000. All rights reserved.
10.3.4
USB Control A register (USBCONA)
Table 54: USBCON register: bit description
Bit
Symbol
7
Self
Powered
6
Enable
SYNCLK
Description
A logic 0 selects bus-powered operation. A logic 1 enables (hybrid)
self-powered operation.
A logic 1 enables a 12 MHz clock signal on output SYNCLK, used
during external emulation of the microcontroller. A logic 0 disables
the clock signal on SYNCLK.
A logic 0 selects internal 82 k
pull-down resistors on the MYn
lines (keyboard matrix enabled). A logic 1 selects internal 8.2 k
pull-up resistors on the MYn lines (keyboard matrix disabled).
A logic 0 enables upstream GoodLink indication, using output
MEMSEL/UPGL to drive the LED. A logic 1 configures pin
MEMSEL/UPGL as a chip select output for accessing an external
serial EEPROM via the I
2
C-bus interface.
A logic 1 configures pins OCn/DPGLn as overcurrent detection
inputs. A logic 0 configures pins OCn/DPGLn as downstream port
GoodLink indicator outputs.
A logic 0 enables internal analog overcurrent sensing on pins
OCn/DPGLn (if enabled via bit EnableOverCurrent). A logic 1
selects digital overcurrent sensing.
A logic 0 connects an internal 1.5 k
pull-up resistor to the
upstream USB port (pin UP_DP). A logic 1 disables the pull-up
resistor.
A logic 1 switches off the clock after 2 ms following a ‘suspend’
interrupt. A logic 0 causes the clock to remain active during
‘suspend’ state. A change from logic 0 to logic 1 in the ‘suspend’
interrupt service routine switches off the clock after 1 ms.
5
Disable
KBDMatrix
4
GL-
MEMSEL
Selection
3
Enable
Over
Current
AnalogOC
Disable
2
1
Soft
Connect_N
0
Suspend
Clock
Table 55: USBCONA register: bit allocation
Bit
7
Symbol
Reset
0
Access
W
6
5
4
3
2
1
0
reserved
PortCount1
0
W
PortCount0
1
W
0
W
0
W
0
W
0
W
0
W
Table 56: USBCONA register: bit description
Bit
Symbol
7 to 2
-
1, 0
PortCount[1:0] number of enabled embedded functions:
00 —
undefined
01 —
1 embedded function (default)
10 —
2 embedded functions
11 —
3 embedded functions
Description
reserved
相關PDF資料
PDF描述
ISP1130N Universal Serial Bus compound hub with integrated keyboard controller
ISP1160 Embedded Universal Serial Bus Host Controller
ISP1160BD Embedded Universal Serial Bus Host Controller
ISP1160BM Embedded Universal Serial Bus Host Controller
ISP1161A Full-speed Universal Serial Bus single-chip host and device controller
相關代理商/技術參數
參數描述
ISP1130N 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Universal Serial Bus compound hub with integrated keyboard controller
ISP1160 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Embedded Universal Serial Bus Host Controller
ISP1160BD 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Embedded Universal Serial Bus Host Controller
ISP1160BD,157 功能描述:USB 接口集成電路 USB 1.1 HOST CONTROLLER RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
ISP1160BD/01 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Embedded Universal Serial Bus Host Controller
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*