R/ W XX X 0-2 X don’t care" />
參數資料
型號： DS2409P
廠商： Maxim Integrated Products
文件頁數： 14/18頁
文件大小： 0K
描述： IC COUPLER MICROLAN 1-WIRE 6TSOC
標準包裝： 120
接口： 1 線
電源電壓： 4.5 V ~ 5.5 V
封裝/外殼： 6-LSOJ
供應商設備封裝： 6-TSOC
包裝： 管件
安裝類型： 表面貼裝
DS2409
5 of 18
STATUS CONTROL BYTE Table 1
765432
1
0
DATA
X
CNTR.
SEL.
MODE
R/ W
XX
X
0-2
X
don’t care
3-4
R/ W
Write control: both bits must be 0 to change the status.
5
MODE
control output mode selection: 0 = auto-control mode (default), 1 = manual mode
6
CNTR.
SEL.
control output association (auto-control mode): 0 = main (default), 1 = auxiliary
7
DATA
X
Value to be written to control output (manual mode only): don’t care otherwise
STATUS INFO BYTE Table 2
765432
1
0
MODE
CNTR.
STAT
EVNT
AUX.
EVNT
MAIN
AUX.
LEVL
AUX.
STAT
MAIN
LEVL
MAIN
STAT
0
MAIN
STAT
status of main output: 0 = active (connected to bus master), 1 = inactive
1
MAIN
LEVL
voltage sensed at main output: 0 = low, 1 = high (see note)
2
AUX.
STAT
status of auxiliary output: 0 = active (connected to bus master), 1 = inactive
3
AUX.
LEVL
voltage sensed at auxiliary output: 0 = low, 1 = high (see note)
4
EVNT
MAIN
event flag for main output: 0 = no event, 1 = negative edge sensed since inactive
5
EVNT
AUX.
event flag for aux. Output: 0 = no event, 1 = negative edge sensed since inactive
6
CNTR.
STAT
if auto-control mode: control output association, 0 = main, 1 = auxiliary
if manual mode: 0 = output transistor off, 1 = output transistor on
7
MODE
control output mode: 0 = auto-control mode, 1 = manual mode
NOTE:
Data is valid only if the output is decoupled from the 1-Wire input.
ALL LINES OFF [66h]
This command is used to deactivate the currently active 1-Wire output and to clear both event flags or to
end a discharge cycle initiated by the Discharge Lines command. Before issuing this command, one
should read the status and check the event flags of both, the main and the auxiliary output. Otherwise one
might inadvertently clear the event flag without having taken appropriate action. If the DS2409 is in auto-
control mode, the transistor at the control output will be switched off (non-conducting). At power-on, the
device will automatically perform the All Lines Off command. In contrast to a power-on cycle, the All
Lines Off command does not clear the Mode and Control Select bits.
Not
Recommended
for
New
Design
相關PDF資料
PDF描述
D38999/26MD5HN CONN PLUG 5POS STRAIGHT W/PINS
V24C28H150B2 CONVERTER MOD DC/DC 28V 150W
V24C24H150BL3 CONVERTER MOD DC/DC 24V 150W
V24C24H150BG CONVERTER MOD DC/DC 24V 150W
V24C24H150B2 CONVERTER MOD DC/DC 24V 150W
相關代理商/技術參數
參數描述
DS2409P/T&R 制造商:Maxim Integrated Products 功能描述:IC COUPLER MICROLAN 1-WIRE 6TSOC
DS2409P/T&R 功能描述:接口 - 專用 RoHS:否 制造商:Texas Instruments 產品類型:1080p60 Image Sensor Receiver 工作電源電壓:1.8 V 電源電流:89 mA 最大功率耗散: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:BGA-59
DS2409P+ 制造商:Maxim Integrated Products 功能描述:MICROLAN COUPLER 制造商:Maxim Integrated Products 功能描述:MICROLAN COUPLER SMD TSOC-6 2409
DS2411 制造商:MAXIM 制造商全稱:Maxim Integrated Products 功能描述:Silicon Serial Number with Vcc Input
DS2411C/W 制造商:Maxim Integrated Products 功能描述:SINGLE, UNSORTED UN-BACKLAPPED WAFER - Gel-pak, waffle pack, wafer, diced wafer on film
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*