參數資料
型號： DS21FF42
廠商： DALLAS SEMICONDUCTOR
元件分類： Digital Transmission Controller
英文描述： DATACOM, FRAMER, PBGA300
封裝： 27 X 27 MM, BGA-300
文件頁數： 49/115頁
文件大?。?/td> 534K
代理商： DS21FF42
DS21FF42/DS21FT42
39 of 115
SYMBOL
POSITION
NAME AND DESCRIPTION
TESMDM
CCR3.0
Transmit Elastic Store Minimum Delay Mode. See
Section 17 for details.
0 = elastic stores operate at full two frame depth
1 = elastic stores operate at 32–bit depth
PULSE DENSITY ENFORCER
The Framer always examines both the transmit and receive data streams for violations of the following
rules which are required by ANSI T1.403:
–
No more than 15 consecutive zeros
–
At least N ones in each and every time window of 8 x (N +1) bits where N = 1 through 23
Violations for the transmit and receive data streams are reported in the RIR2.0 and RIR2.1 bits
respectively. When the CCR3.3 is set to one, the DS21Q42 will force the transmitted stream to meet this
requirement no matter the content of the transmitted stream. When running B8ZS, the CCR3.3 bit should
be set to zero since B8ZS encoded data streams cannot violate the pulse density requirements.
CCR4: COMMON CONTROL REGISTER 4 (Address=11 Hex)
(MSB)
(LSB)
RSRE
RPCSI
RFSA1
RFE
RFF
THSE
TPCSI
TIRFS
SYMBOL
POSITION
NAME AND DESCRIPTION
RSRE
CCR4.7
Receive Side Signaling Re–Insertion Enable. See Section
14 for details.
0 = do not re-insert signaling bits into the data stream
presented at the RSER pin
1 = reinsert the signaling bits into data stream presented at
the RSER pin
RPCSI
CCR4.6
Receive Per–Channel Signaling Insert. See Section 14 for
more details.
0 = do not use RCHBLK to determine which channels should
have signaling re–inserted
1 = use RCHBLK to determine which channels should have
signaling re–inserted
RFSA1
CCR4.5
Receive Force Signaling All Ones. See Section 14 for more
details.
0 = do not force extracted robbed–bit signaling bit positions
to a one
1 = force extracted robbed–bit signaling bit positions to a one
RFE
CCR4.4
Receive Freeze Enable. See Section 14 for details.
0 = no freezing of receive signaling data will occur
1 = allow freezing of receive signaling data at RSIG (and
RSER if CCR4.7 = 1).
相關PDF資料
PDF描述
DS21FF42N DATACOM, FRAMER, PBGA300
DS21FT44N DATACOM, FRAMER, PBGA300
DS21FT44 DATACOM, FRAMER, PBGA300
DS21Q352 DATACOM, PCM TRANSCEIVER, PBGA256
DS21Q354 DATACOM, PCM TRANSCEIVER, PBGA256
相關代理商/技術參數
參數描述
DS21FF42+ 功能描述:網絡控制器與處理器 IC 4x4 16/4x3 12 Chnl T1/T1 Framer RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS21FF42N 功能描述:網絡控制器與處理器 IC RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS21FF42N+ 功能描述:網絡控制器與處理器 IC 4x4 16/4x3 12 Chnl T1/T1 Framer RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS21FF44 功能描述:網絡控制器與處理器 IC 4x4 16/4x3 12 Chnl E1/E1 Framer RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS21FF44N 功能描述:網絡控制器與處理器 IC RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*