參數資料
型號： ADV7181B
廠商： Analog Devices, Inc.
英文描述： Multiformat SDTV Video Decoder
中文描述： 標清多格式視頻解碼器
文件頁數： 37/96頁
文件大?。?/td> 873K
代理商： ADV7181B
ADV7181B
BL_C_VBI Blank Chroma during VBI, Address 0x04 [2]
Rev. 0 | Page 37 of 96
Setting BL_C_VBI high, the Cr and Cb values of all VBI lines
are blanked. This is done so any data that may arrive during VBI
is not decoded as color and output through Cr and Cb. As a
result, it is possible to send VBI lines into the decoder, then
output them through an encoder again, undistorted. Without
this blanking, any wrongly decoded color is encoded by the
video encoder; therefore, the VBI lines are distorted.
Setting BL_C_VBI to 0 decodes and outputs color during VBI.
Setting BL_C_VBI to 1 (default) blanks Cr and Cb values
during VBI.
RANGE Range Selection, Address 0x04 [0]
AV codes (as per ITU-R BT-656, formerly known as CCIR-656)
consist of a fixed header made up of 0xFF and 0x00 values.
These two values are reserved and therefore are not to be used
for active video. Additionally, the ITU specifies that the nominal
range for video should be restricted to values between 16 and
235 for luma and 16 to 240 for chroma.
The RANGE bit allows the user to limit the range of values
output by the ADV7181B to the recommended value range. In
any case, it ensures that the reserved values of 255d (0xFF) and
00d (0x00) are not presented on the output pins unless they are
part of an AV code header.
Table 50. RANGE Function
RANGE
Description
0
16 ≤ Y ≤ 235
1 (default)
1 ≤ Y ≤ 254
16 ≤ C/P ≤ 240
1 ≤ C/P ≤ 254
AUTO_PDC_EN Automatic Programmed Delay Control,
Address 0x27 [6]
Enabling the AUTO_PDC_EN function activates a function
within the ADV7181B that automatically programs the
LTA[1:0] and CTA[2:0] to have the chroma and luma data
match delays for all modes of operation. If set, manual registers
LTA[1:0] and CTA[2:0] are not used. If the automatic mode is
disabled (via setting the AUTO_PDC_EN bit to 0), the values
programmed into LTA[1:0] and CTA[2:0] registers become
active.
When AUTO_PDC_EN is 0, the ADV7181 uses the LTA[1:0]
and CTA[2:0] values for delaying luma and chroma samples.
Refer to the LTA[1:0] Luma Timing Adjust, Address 0x27 [1:0]
and the CTA[2:0] Chroma Timing Adjust, Address 0x27 [5:3]
sections.
When AUTO_PDC_EN is 1 (default), the ADV7181
automatically determines the LTA and CTA values to have luma
and chroma aligned at the output.
LTA[1:0] Luma Timing Adjust, Address 0x27 [1:0]
The Luma Timing Adjust register allows the user to specify a
timing difference between chroma and luma samples.
Note that there is a certain functionality overlap with the
CTA[2:0] register. For manual programming, use the following
defaults:
CVBS input LTA[1:0] = 00.
YC input LTA[1:0] = 01.
YPrPb input LTA[1:0] =01.
Table 51. LTA Function
LTA[1:0]
Description
00 (default)
No delay.
01
Luma 1 clk (37 ns) delayed.
10
Luma 2clk (74 ns) early.
11
Luma 1 clk (37 ns) early.
CTA[2:0] Chroma Timing Adjust, Address 0x27 [5:3]
The Chroma Timing Adjust register allows the user to specify a
timing difference between chroma and luma samples. This may
be used to compensate for external filter group delay differences
in the luma versus chroma path, and to allow a different number
of pipeline delays while processing the video downstream.
Review this functionality together with the LTA[1:0] register.
The chroma can be delayed/advanced only in chroma pixel
steps. One chroma pixel step is equal to two luma pixels. The
programmable delay occurs after demodulation, where one can
no longer delay by luma pixel steps.
For manual programming, use the following defaults:
CVBS input CTA[2:0] = 011.
YC input CTA[2:0] = 101.
YPrPb input CTA[2:0] =110.
Table 52. CTA Function
CTA[2:0]
000
001
010
011 (default)
100
101
110
111
Description
Not used.
Chroma + 2 chroma pixel (early).
Chroma + 1 chroma pixel (early).
No delay.
Chroma – 1 chroma pixel (late).
Chroma – 2 chroma pixel (late).
Chroma – 3 chroma pixel (late).
Not used.
相關PDF資料
PDF描述
ADV7181BBCPZ Multiformat SDTV Video Decoder
ADV7181BBSTZ Multiformat SDTV Video Decoder
ADV7181BCP Multiformat SDTV Video Decoder
ADV7181BST Multiformat SDTV Video Decoder
ADV7183B Multiformat SDTV Video Decoder
相關代理商/技術參數
參數描述
ADV7181BBCPZ 制造商:Analog Devices 功能描述:Video Decoder 3ADC 9-Bit 64-Pin LFCSP EP 制造商:Rochester Electronics LLC 功能描述:ADV718XB DECODER FAMILY UPDATES - Bulk 制造商:Analog Devices 功能描述:IC VIDEO ENCODER
ADV7181BBSTZ 制造商:Analog Devices 功能描述:Video Decoder 3ADC 9-Bit 64-Pin LQFP 制造商:Analog Devices 功能描述:IC VIDEO ENCODER
ADV7181BCP 制造商:Analog Devices 功能描述:Video Decoder 3ADC 9-Bit 64-Pin LFCSP EP 制造商:Rochester Electronics LLC 功能描述:10BIT NTSC/PAL/SECAM VIDEO DECODER I.C. - Bulk
ADV7181BCPZ 制造商:Analog Devices 功能描述:
ADV7181BST 制造商:Analog Devices 功能描述:Video Decoder 3ADC 9-Bit 64-Pin LQFP 制造商:Rochester Electronics LLC 功能描述:9-BIT BIT NTSC/PAL/SECAM VIDEO DECODER - Bulk 制造商:Analog Devices 功能描述:IC VIDEO ENCODER
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*