參數資料
型號: ADAU1401YSTZ
廠商: Analog Devices Inc
文件頁數: 13/52頁
文件大?。?/td> 0K
描述: IC AUDIO PROC 28/56BIT 48LQFP
標準包裝: 1
系列: SigmaDSP®
類型: 音頻處理器
應用: 監控器,電視
安裝類型: 表面貼裝
封裝/外殼: 48-LQFP
供應商設備封裝: 48-LQFP(7x7)
包裝: 托盤
ADAU1401
Data Sheet
Rev. C | Page 20 of 52
VOLTAGE REGULATOR
Two specifications must be considered when choosing a regu-
lator transistor: The transistor’s current amplification factor
(hFE or beta) should be at least 100, and the transistor’s collector
must be able to dissipate the heat generated when regulating
from 3.3 V to 1.8 V. The maximum digital current drawn from
the ADAU1401 is 60 mA. The equation to determine the
minimum power dissipation of the transistor is as follows:
The digital voltage of the ADAU1401 must be set to 1.8 V. The
chip includes an on-board voltage regulator that allows the
device to be used in systems without an available 1.8 V supply
but with an available 3.3 V supply. The only external components
needed in such instances are a PNP transistor, a resistor, and a
few bypass capacitors. Only one pin, VDRIVE, is necessary to
support the regulator.
(3.3 V 1.8 V) × 60 mA = 90 mW
There are many transistors, such as the FZT953 from Zetex
Semiconductors, with these specifications available in small
SOT-23 or SOT-223 packages.
The recommended design for the voltage regulator is shown
in Figure 16. The 10 μF and 100 nF capacitors shown in this
configuration are recommended for bypassing, but are not
necessary for operation. Each DVDD pin should have its own
100 nF bypass capacitor, but only one bulk capacitor (10 μF to
47 μF) is needed for both DVDD pins. With this configuration,
3.3 V is the main system voltage; 1.8 V is generated at the
transistor’s collector, which is connected to the DVDD pins.
VDRIVE is connected to the base of the PNP transistor. If the
regulator is not used in the design, VDRIVE can be tied to ground.
3.3V
1k
VDRIVE
DVDD
10F
100nF
ADAU1401
06
75
2-
01
6
+
Figure 16. Voltage Regulator Configuration
相關PDF資料
PDF描述
VI-B6W-MY CONVERTER MOD DC/DC 5.5V 50W
ADAU1461WBCPZ IC SIGMADSP 24BIT 96KHZ PLL 32
VI-B6R-MY CONVERTER MOD DC/DC 7.5V 50W
LTC1417ACGN#TR IC ADC 14BIT 400KSPS SMPL 16SSOP
VI-B6M-MY CONVERTER MOD DC/DC 10V 50W
相關代理商/技術參數
參數描述
ADAU1401YSTZ-RL 功能描述:IC AUDIO PROC 28/56BIT 48LQFP RoHS:是 類別:集成電路 (IC) >> 線性 - 音頻處理 系列:SigmaDSP® 其它有關文件:STA321 View All Specifications 標準包裝:1 系列:Sound Terminal™ 類型:音頻處理器 應用:數字音頻 安裝類型:表面貼裝 封裝/外殼:64-LQFP 裸露焊盤 供應商設備封裝:64-LQFP EP(10x10) 包裝:Digi-Reel® 其它名稱:497-11050-6
ADAU1421YSTZ 制造商:Analog Devices 功能描述:
ADAU1421YSTZ-REEL 制造商:Analog Devices 功能描述:
ADAU1442 制造商:AD 制造商全稱:Analog Devices 功能描述:SigmaDSP Digital Audio Processor
ADAU1442YSVZ-3A 功能描述:IC SIGMADSP 28B 175MHZ 100TQFP RoHS:是 類別:集成電路 (IC) >> 線性 - 音頻處理 系列:SigmaDSP® 其它有關文件:STA321 View All Specifications 標準包裝:1 系列:Sound Terminal™ 類型:音頻處理器 應用:數字音頻 安裝類型:表面貼裝 封裝/外殼:64-LQFP 裸露焊盤 供應商設備封裝:64-LQFP EP(10x10) 包裝:Digi-Reel® 其它名稱:497-11050-6