參數資料
型號： 78Q2133/F
廠商： Maxim Integrated Products
文件頁數： 13/38頁
文件大?。?/td> 0K
描述： TXRX 10/100 MDIX 3.3V IND 32-QFN
產品培訓模塊： Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
標準包裝： 490
類型： PHY 收發器
驅動器/接收器數： 4/4
規程： IEEE 802
電源電壓： 3 V ~ 3.6 V
安裝類型： 表面貼裝
封裝/外殼： 32-VFQFN 裸露焊盤
供應商設備封裝： 32-QFN 裸露焊盤（5x5）
包裝： 管件
78Q2123/78Q2133 Data Sheet
DS_21x3_001
20
Rev. 1.6
3.9
MR17: Interrupt Control/Status Register
The Interrupt Control/Status Register provides the means for controlling and observing the events, which
trigger an interrupt on the INTR pin. This register can also be used in a polling mode via the MII Serial
Interface as a means to observe key events within the PHY via one register address. Bits 0 through 7 are
status bits, which are each set to logic one based upon an event. These bits are cleared after the register
is read. Bits 8 through 15 of this register, when set to logic one, enable their corresponding bit in the
lower byte to signal an interrupt on the INTR pin. The assertion level of this interrupt signal output on the
INTR pin can be set via the MR16.14 (INPOL) bit.
Bit
Symbol
Type
Default
Description
17.15
JABBER_IE
R/W
0
Jabber Interrupt Enable
17.14
RXER_IE
R/W
0
Receive Error Interrupt Enable
17.13
PRX_IE
R/W
0
Page Received Interrupt Enable
17.12
PDF_IE
R/W
0
Parallel Detect Fault Interrupt Enable
17.11
LP-ACK_IE
R/W
0
Link Partner Acknowledge Interrupt Enable
17.10
LS-CHG_IE
R/W
0
Link Status Change Interrupt Enable
17.9
RFAULT_IE
R/W
0
Remote Fault Interrupt Enable
17.8
ANEG-
COMP_IE
R/W
0
Auto-Negotiation Complete Interrupt Enable
17.7
JAB_INT
RC
0
Jabber Interrupt: This bit is set high when a Jabber
event is detected by the 10Base-T circuitry.
17.6
RXER_INT
RC
0
Receive Error Interrupt: This bit is set high when the
RX_ER signal transitions high.
17.5
PRX_INT
RC
0
Page Received Interrupt: This bit is set high when a new
page has been received from the link partner during
auto-negotiation.
17.4
PDF_INT
RC
0
Parallel Detect Fault Interrupt: This bit is set high by the
auto-negotiation logic when a parallel detect fault
condition is indicated.
17.3
LP-ACK_INT
RC
0
Link Partner Acknowledge Interrupt: This bit is set high
by the auto-negotiation logic when FLP bursts are
received with the acknowledge bit set.
17.2
LS-CHG_INT
RC
0
Link Status Change Interrupt: This bit is set when the
link transitions from an OK status to a FAIL status.
17.1
RFAULT_INT
RC
0
Remote Fault Interrupt: This bit is set when a remote
fault condition has been indicated by the link partner.
17.0
ANEG-
COMP_INT
RC
0
Auto-Negotiation Complete Interrupt: This bit is set by
the auto-negotiation logic upon successful completion of
auto-negotiation.
相關PDF資料
PDF描述
78Q8392LA03-28CHR/F TXRX 10BASE 2/5 ETH COAX 28-PLCC
78Q8430-100IGT/F IC LAN MEDIA ACCESS CTLR 100LQFP
A1020B-1CQ84C IC FPGA 2K GATES 84-CQFP COM
A1225A-1PQ100C IC FPGA 2500 GATES 100-PQFP COM
A1440A-1VQG100I IC FPGA 4K GATES 100-VQFP
相關代理商/技術參數
參數描述
78Q2133R/F 功能描述:以太網 IC 10/100 Fast Ethernet MicroPHY RoHS:否 制造商:Micrel 產品:Ethernet Switches 收發器數量:2 數據速率:10 Mb/s, 100 Mb/s 電源電壓-最大:1.25 V, 3.45 V 電源電壓-最小:1.15 V, 3.15 V 最大工作溫度:+ 85 C 封裝 / 箱體:QFN-64 封裝:Tray
78Q2133R/F1 功能描述:以太網 IC RoHS:否 制造商:Micrel 產品:Ethernet Switches 收發器數量:2 數據速率:10 Mb/s, 100 Mb/s 電源電壓-最大:1.25 V, 3.45 V 電源電壓-最小:1.15 V, 3.15 V 最大工作溫度:+ 85 C 封裝 / 箱體:QFN-64 封裝:Tray
78Q2133S/F 功能描述:1/1 Transceiver Full Ethernet 32-TQFN (5x5) 制造商:maxim integrated 系列:- 包裝:管件 零件狀態:有效 類型:收發器 協議:以太網 驅動器/接收器數:1/1 雙工:全 接收器滯后:- 數據速率:- 電壓 - 電源:3.3V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:32-WFQFN 裸露焊盤 供應商器件封裝:32-TQFN（5x5） 標準包裝:490
78Q2133SR/F 功能描述:1/1 Transceiver Full Ethernet 32-TQFN (5x5) 制造商:maxim integrated 系列:- 包裝:帶卷（TR） 零件狀態:有效 類型:收發器 協議:以太網 驅動器/接收器數:1/1 雙工:全 接收器滯后:- 數據速率:- 電壓 - 電源:3.3V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:32-WFQFN 裸露焊盤 供應商器件封裝:32-TQFN（5x5） 標準包裝:2,500
78Q8340-ARM9-EVM 功能描述:開發板和工具包 - ARM 700-78Q8340ARM9-EVM- Kit RoHS:否 制造商:Arduino 產品:Development Boards 工具用于評估:ATSAM3X8EA-AU 核心:ARM Cortex M3 接口類型:DAC, ICSP, JTAG, UART, USB 工作電源電壓:3.3 V
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*