- 您現在的位置：買賣IC網 > PDF目錄222673 > 5962-9317706QZA 16K X 9 OTHER FIFO, 15 ns, CDFP28 PDF資料下載
參數資料
| 型號： | 5962-9317706QZA |
| 元件分類： | FIFO |
| 英文描述： | 16K X 9 OTHER FIFO, 15 ns, CDFP28 |
| 封裝： | 0.400 INCH, FP-28 |
| 文件頁數： | 18/22頁 |
| 文件大?。?/td> | 392K |
| 代理商： | 5962-9317706QZA |
5
M672061F
Rev. E–20-Aug-01
Once half the memory is filled, and during the falling edge of the next write operation,
the Half-Full Flag (HF) will be set to low and remain in this state until the difference
between the write and read pointers is less than or equal to half of the total available
memory in the device. The Half-Full Flag (HF) is then reset by the rising edge of the
read operation.
To prevent data overflow, the Full Flag (FF) will go low, inhibiting further write opera-
tions. On completion of a valid read operation, the Full Flag (FF) will go high after TRFF,
allowing a valid write to begin. When the FIFO stack is full, the internal write pointer is
blocked from W, so that external changes to W will have no effect on the full FIFO stack.
Read Enable (R)
A read cycle is initiated on the falling edge of the Read Enable (R) provided that the
Empty Flag (EF) is not set. The data is accessed on a first in/first out basis, not including
any current write operations. After Read Enable (R) goes high, the Data Outputs (Q0 -
Q8) will return to a high impedance state until the next Read operation. When all the
data in the FIFO stack has been read, the Empty Flag (EF) will go low, allowing the
“final” read cycle, but inhibiting further read operations while the data outputs remain in
a high impedance state. Once a valid write operation has been completed, the Empty
Flag (EF) will go high after tWEF and a valid read may then be initiated. When the FIFO
stack is empty, the internal read pointer is blocked from R, so that external changes to R
will have no effect on the empty FIFO stack.
First Load/Retransmit
(FL/RT)
This is a dual-purpose input. In the Depth Expansion Mode, this pin is connected to
ground to indicate that it is the first loaded (see Operating Modes). In the Single Device
Mode, this pin acts as the retransmit input. The Single Device Mode is initiated by con-
necting the Expansion In (XI) to ground.
The M672061F can be set to retransmit data when the Retransmit Enable Control (RT)
input is pulsed low. A retransmit operation will set the internal read point to the first loca-
tion and will not affect the write pointer. Read Enable (R) and Write Enable (W) must be
in the high state during retransmit. The retransmit feature is intended for use when a
number of writes are equal to or less than the depth of the FIFO has occured since the
last RS cycle. The retransmit feature is not compatible with the Depth Expansion Mode
and will affect the Half-Full Flag (HF), in accordance with the relative locations of the
read and write pointers.
Expansion In (XI)
This input is a dual-purpose pin. Expansion In (XI) is connected to GND to indicate an
operation in the single device mode. Expansion In (XI) is connected to Expansion Out
(XO) of the previous device in the Depth Expansion or Daisy Chain modes.
Full Flag (FF)
The Full Flag (FF) will go low, inhibiting further write operations when the write pointer is
one location less than the read pointer, indicating that the device is full. If the read
pointer is not moved after Reset (RS), the Full Flag (FF) will go low after 16384 writes.
Empty Flag (EF)
The Empty Flag (EF) will go low, inhibiting further read operations when the read pointer
is equal to the write pointer, indicating that the device is empty.
Expansion Out/Half-Full
Flag (XO/HF)
This is a dual-purpose output. In the single device mode, when Expansion In (XI) is con-
nected to ground, this output acts as an indication of a half-full memory.
The M672061F offers a variable offset for the Half Full condition. The offset is loaded
into a register during a reset cycle. When RS is low, the Programmable Half Full Flag
(PHF) can be loaded from the DATA inputs I
0-I8 by pulsing W low or from the DATA out-
相關PDF資料 |
PDF描述 |
|---|---|
| 5962-9458502H5X | 128K X 32 EEPROM 5V MODULE, 250 ns, CPGA66 |
| 5962-9859001MUA | 3.3 V FIXED POSITIVE LDO REGULATOR, 1.5 V DROPOUT, CSFM3 |
| 5962F0324801QXC | Radiation Hardened, 9A, Non-Inverting Power MOSFET Driver |
| 5962F9666301VXC | CAP CERAMIC 6PF 50V C0G 0402 |
| 5962F9666302V9A | CAP CERAMIC 6.2PF 50V C0G 0402 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 5962-9317707VNC | 制造商:Atmel Corporation 功能描述:FIFO ASYNC DUAL DEPTH/WIDTH UNI-DIR 16KX9 28PIN FPAK - Rail/Tube |
| 5962-9317708VNC | 制造商:Atmel Corporation 功能描述:FIFO ASYNC DUAL DEPTH/WIDTH UNI-DIR 16KX9 28PIN FPAK - Rail/Tube |
| 5962-9317709QNC | 制造商:Atmel Corporation 功能描述:FIFO ASYNC DUAL DEPTH/WIDTH UNI-DIR 16KX9 28PIN FPAK - Rail/Tube |
| 5962-9317709VNC | 制造商:Atmel Corporation 功能描述:FIFO ASYNC DUAL DEPTH/WIDTH UNI-DIR 16KX9 28PIN FP - Rail/Tube |
| 5962-9317901MLA | 制造商:Analog Devices 功能描述:ADC Single SAR 100ksps 12-bit Parallel/Serial 24-Pin CDIP 制造商:Analog Devices 功能描述:ADC SGL SAR 100KSPS 12-BIT PARALLEL/SERL 24CDIP - Rail/Tube 制造商:Analog Devices Inc. 功能描述:Analog to Digital Converters - ADC 12-BIT SAMPLING ADC IC 制造商:Analog Devices 功能描述:CONVERTER - ADC |
發布緊急采購，3分鐘左右您將得到回復。