4
Z
Z
Standard
(except flexible rod types)
0.01 mm to 1 m/second
(see note 2)
240 operations/min.
20 operations/min.
100 M
min. (at 500 VDC)
50 m
max. (initial)
1,000 VAC, 50/60 Hz for 1 minute between terminals of same polarity
600 VAC, 50/60 Hz for 1 minute
2,000 VAC, 50/60 Hz for 1 minute between current carrying metal parts and
ground and between each terminal and non-current carrying metal parts
10 to 55 Hz, 1.5 mm
double amplitude
(see note 4)
1,000 m/s
2
min. (approx. 100 g)
300 m/s
2
min. (approx. 30 g)
(see note 3)
-25
°
to 80
°
C (with no icing)
-15
°
to 80
°
C (with no icing)
35% to 85% RH
35% to 95% RH
G, H contact gap models
20,000,000 operations min.
(see note 4)
G, H contact gap models
500,000 operations min.
(see note 2)
Approx. 22 to 58 g
Standard flexible rod types
(coil spring and steel wire type)
1 mm to 1 m/second
120 operations/min.
20 operations/min.
Operating speed
Operating frequency
Mechanical
Electrical
Insulation resistance
Contact resistance
Dielectric strength (VAC)
15 m
max. (initial)
G contact gap model
H contact gap model
Vibration
Malfunction
10 to 20 Hz, 1.5 mm
double amplitude
Shock
Mechanical durability
Malfunction
Standard types
Drip-proof types
Standard types
Drip-proof types
Mechanical
50 m/s
2
min. (approx. 5 g)
Ambient temperature
Humidity
Service life
1,000,000 operations min.
Electrical
100,000 operations min.
Weight
Approx. 42 to 48 g
Characteristics
I
ACCESSORIES
(order separately)
ZAA-1
w/Z-15G-B
500 g
170 g
—
12.7 mm
2.2 mm
34.5 mm
28.9
±
1.6 mm
ZAA-2
w/Z-15G-B
500 g
170 g
—
12.7 mm
2.2 mm
46.1 mm
40.4
±
1.6 mm
Characteristics
OF max.
RF min.
PT max.
OT min.
MD max.
FP max.
OP
Operating Characteristics (when used with Z-15)
Material
Phenolic resin
Metal
Polyvinyl chloride
Mounting method
Side mounting
Side mounting
Side mounting
For solder terminal
AP-A
AP1-A
AP-Z
For screw terminal
AP-B
AP1-B
AP-Z
Remarks
—
Use in conjunction with AP-A and AP-B
Excels in safety and dust-proofing property
Terminal enclosures - Standard models
Note: 1. Data shown are of initial value.
2. Apply to the pin plunger models or the pin plunger of the lever models.
3. Apply to Z-15G.
4. Apply to the pin plunger models.