
Application-SpeciTc Information
The PowerPC name, the PowerPC logotype, and PowerPC 604e are trademarks of International Business Machines Corporation used by Motorola under license from
International Business Machines Corporation.
This document contains information on a new product under development by Motorola. Motorola reserves the right to change or discontinue this product without notice.
Motorola Inc. 1998. All rights reserved.
a
PowerPC
PIDAq-604e and PID9q-604e (Mach5) Part Number SpeciTcations
604e
a
RISC Microprocessor Family:
This document deTnes a unique part number for a PowerPC 604e microprocessor manufactured by Motorola. It describes changes
to recommended operating conditions and revised electrical speciTcations, as applicable, from those described in the
RISC Microprocessor Family: PID9q-Mach5 Hardware SpeciTcations
functional description provided in the
PowerPCa 604 RISC Microprocessor Users Manual
addendum (order # MPC604UMAD/AD) are described in a separate Errata List available from your local Motorola sales ofTce.
PowerPC 604e
. Any functional differences (errata) for these parts from the
(order # MPC604UM/AD) or its
SpeciTcations provided in this data sheet supercede those in 4/97 Revision of the
MPC604E9QEC/D); speciTcations not addressed herein are unchanged. This document is frequently updated; refer to the website
at http://www.mot.com/SPS/PowerPC/ for the latest version.
PID9q-Mach5 Hardware SpeciTcations
(order #:
Note that headings and tables in this data sheet are not numbered; however, they are intended to correspond directly to the heading
or table affected in the general hardware speciTcations. Any additional information (including tables) not included in the hardware
speciTcations are noted.
Part numbers addressed in this document and a summary of their differences from the general speciTcation are listed in the
following table. For more detailed ordering infomation see òOrdering Information for the PB-604e Microprocessoró on page 2.
Feature Changes
This section summarizes signiTcant feature changes beween the revision of the PID9q-604e addressed by this document and the
previously available revision 1.01 (XPC604RRXnnnPB where nnn is the CPU frequency) and revision 1.1 (XPC604RRXnnnPC).
¥
Errata #7 from these earlier revisions is corrected on revision 1.2.
The following features are signiTcantly different from the feature set described in the
Manual
(order # MPC604UM/AD) or its addendum (order # MPC604UMAD/AD). While they are unchanged from revisions 1.01
and 1.1, they bear repeating here.
PowerPC 604 RISC Microprocessor Users
¥
In-system testability and debugging features through JTAG boundary-scan capability is not guaranteed in these part
revisions.
Part Numbers Addressed by this Data Sheet
Motorola Part
Number
Operating Conditions
SigniTcant Differences from Hardware
SpeciTcation
CPU
Frequency
Vdd
T
J
(C)
XPC604RRX266LD
266 MHz
1.80 to 2.00V
0 to 85
New PVR.; BTAC Disabled
XPC604RRX300LD
300 MHz
1.80 to 2.00V
0 to 85
New PVR ; BTAC Disabled
XPC604RRX333LD
333 MHz
1.80 to 2.00V
0 to 85
New PVR ; BTAC Disabled
Note: The X preTx in a Motorola PowerPC part number designates a òPilot Production Prototypeó as deTned by
Motorola SOP 3-13. These are from a limited production volume of prototypes manufactured, tested and Q.A.
inspected on a qualiTed technology to simulate normal production. These parts have only preliminary reliability
and characterization data. Before pilot production prototypes may be shipped, written authorization from the
customer must be on Tle in the applicable sales ofTce acknowledging the qualiTcation status and the fact that
product changes may still occur while shipping pilot production prototypes.
Motorola Part Numbers Affected:
XPC604RRX266LD
XPC604RRX300LD
XPC604RRX333LD
PID9q-604e_D PNS 980218