FN8156.0 February 2, 2005 and retained for future use. The capacitor array is comprised of 31 individual capacitors connected in parallel. At on" />
參數資料
型號: X90100M8IZT1
廠商: Intersil
文件頁數: 6/7頁
文件大?。?/td> 0K
描述: IC DIGITAL CAPACITOR NV 8-MSOP
標準包裝: 2,500
類型: 數字電容器
應用: 無線
安裝類型: 表面貼裝
封裝/外殼: 8-TSSOP,8-MSOP(0.118",3.00mm 寬)
供應商設備封裝: 8-MSOP
包裝: 帶卷 (TR)
6
FN8156.0
February 2, 2005
and retained for future use. The capacitor array is comprised
of 31 individual capacitors connected in parallel. At one end
of each element is an electronic switch that connects it to the
sum.
The capacitor, when at either end of the range, acts like its
mechanical equivalent and does not move beyond the last
position. That is, the counter does not wrap around when
clocked to either extreme.
The electronic switches on the device operate in a “make
before break” mode when the counter changes positions. If
the counter is moved several positions, multiple units are
connected to the total for tIW (INC to CTOTAL change). The
CTOTAL value for the device can temporarily be increased by
a significant amount if the counter is moved several
positions.
When the device is powered-down, the last counter position
stored will be maintained in the nonvolatile memory. When
power is restored, the contents of the memory are recalled
and the capacitor is set to the value last stored.
Instructions and Programming
The INC, U/D and CS inputs control the movement of the
capacitor total value. With CS set LOW the device is
selected and enabled to respond to the U/D and INC inputs.
HIGH to LOW transitions on INC will increment or decrement
(depending on the state of the U/D input) a five bit counter.
The output of this counter is decoded to select one of thirty
two capacitor combinations for the capacitor array.
The value of the counter is stored in nonvolatile memory
whenever CS transitions HIGH while the INC input is also
HIGH.
The system may select the X90100, move the capacitor
value and deselect the device without having to store the
latest count total in nonvolatile memory. After the count
movement is performed as described above and once the
new position is reached, the system must keep INC LOW
while taking CS HIGH. The new CTOTAL value will be
maintained until changed by the system or until a power-
up/down cycle recalled the previously stored data.
This procedure allows the system to always power-up to a
preset value stored in nonvolatile memory; then during
system operation minor adjustments can be made. The
adjustments might be based on user preference, system
parameter changes due to temperature drift, etc.
The state of U/D may be changed while CS remains LOW.
This allows the host system to enable the device and then
move the counter up and down until the proper trim is
attained.
Table of Values
Mode Selection
CS
INC
U/D
MODE
L
H
Cap Value Up
L
Cap Value Down
H
X
Store Cap Position
H
X
Standby Current
L
X
No Store, Return To Standby
L
H
Cap Value Up (not recommended)
L
Cap Value Down (not recommended)
Single-Ended Mode
Differential Mode
COUT =
Code
31
7.0 + 7.5 (pF)
0
≤ Code ≤ 31
COUT = Code 0.35 + 1.00 (pF)
0
≤ Code ≤ 31
Cp
Cm
X90100
X1
X2
Oscillator
Circuit
Cp
Cm
X90100
Oscillator
Circuit
Cp
Cs
Example of a single-ended circuit
Example of a differential mode circuit
X90100
相關PDF資料
PDF描述
X9015WS8T1 IC XDCP SGL 32-TAP 10K 8-SOIC
X9110TV14I-2.7 IC XDCP SGL 1024TAP 100K 14TSSOP
X9111TV14I-2.7T1 IC XDCP SGL 1024TAP 100K 14TSSOP
X9116WS8T2 IC XDCP 16-TAP 10K CMOS 8-SOIC
X9118TV14I-2.7 IC XDCP SGL 1024TAP 100K 14TSSOP
相關代理商/技術參數
參數描述
X90100MI 制造商:XICOR 制造商全稱:Xicor Inc. 功能描述:NV Electronically Programmable Capacitor
X90100P8I 制造商:Intersil Corporation 功能描述:X90100P8I - Rail/Tube
X90100X8I 制造商:XICOR 制造商全稱:Xicor Inc. 功能描述:NV Electronically Programmable Capacitor
X90100XI 制造商:XICOR 制造商全稱:Xicor Inc. 功能描述:NV Electronically Programmable Capacitor
X9015 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:Low Noise, Low Power Volatile