![](http://datasheet.mmic.net.cn/370000/UPD168002GA-9EU_datasheet_16743679/UPD168002GA-9EU_1.png)
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
MOS INTEGRATED CIRCUIT
μ
PD168002
MONOLITHIC 6-CHANNEL H-BRIDGE DRIVER
DATA SHEET
Document No. S16040EJ1V0DS00 (1st edition)
Date Published November 2003 NS CP(K)
Printed in Japan
2002
DESCRIPTION
The
μ
PD168002 is a monolithic 6-channel H-bridge driver that consists of a CMOS control circuit and a MOS output
stage. It can reduce the current consumption and the voltage loss at the output stage compared with conventional
driver using bipolar transistors, thanks to employment of a MOS process. The
μ
PD168002 employs P-channel MOS
FET in the output stage, and is eliminated the charge pump circuit. Therefore, the circuit current consumption during
operation can be significantly reduced.
The package is a 48-pin TQFP that helps reduce the mounting area and height.
The
μ
PD168002 can be used to drive one stepping motor and four DC motors, and is suitable for the motor driver of
CD-ROM/CD audios.
FEATURES
Six H-bridge circuits employing power MOS FET
Low current consumption due to elimination of charge pump circuit
Input logic frequency: 100 kHz supported
3 V power supply supported for logic
Minimum operating supply voltage: 2.7 V
5 V, 10 V power supply supported for motor
ch1, ch2, ch5 and ch6: 10 V driving
ch3 and ch4: 5 V driving
Undervoltage lockout circuit
Shuts down the internal circuit at V
DD
= 1.7 V TYP.
Overheat protection circuit
48-pin TQFP (
□
7 mm)
ORDERING INFORMATION
Part Number
Package
μ
PD168002GA-9EU
48-pin plastic TQFP (fine pitch) (7 x 7)