www.ti.com
SLES140F – JULY 2005 – REVISED DECEMBER 2010
NTSC/PAL/SECAM 2 11-Bit Digital Video Decoder
With Macrovision Detection, YPbPr Inputs, and 5-Line Comb Filter
1
Introduction
1.1
Features
12345
Two 30-MSPS 11-bit A/D channels with
Certified Macrovision copy protection
programmable gain control
detection
Supports NTSC (J, M, 4.43), PAL (B, D, G, H, I,
Available in commercial (0°C to 70°C) and
M, N, Nc, 60), and SECAM (B, D, G, K, K1, L)
industrial (
40°C to 85°C) temperature ranges
CVBS, and S-video
Qualified for Automotive Applications
Supports analog component YPbPr video
(AEC-Q100 Rev G
TVP5147M1IPFPQ1 or
format with embedded sync
TVP5147M1IPFPRQ1)
Ten analog video input terminals for
VBI data processor
multisource connection
– Teletext (NABTS, WST)
Supports analog video output
– CC and extended data service (EDS)
User-programmable video output formats
– Wide screen signaling (WSS)
– 10-bit ITU-R BT.656 4:2:2 YCbCr with
– Copy generation management system
embedded syncs
(CGMS)
– 10-bit 4:2:2 YCbCr with separate syncs
– Video program system (VPS/PDC)
– 20-bit 4:2:2 YCbCr with separate syncs
– Vertical interval time code (VITC)
– 2x sampled raw VBI data in active video
– Gemstar 1×/2× mode
during a vertical blanking period
– V-Chip decoding
– Sliced VBI data during a vertical blanking
– Register readback of CC, WSS (CGMS),
period or active video period (full field mode)
VPS/PDC, VITC and Gemstar 1×/2× sliced
HSYNC/VSYNC outputs with programmable
data
position, polarity, width, and field ID (FID)
I2C host port interface
output
Reduced power consumption: 1.8-V digital
Composite and S-video processing
core, 3.3-V for digital I/O, and 1.8-V/3.3 V analog
– Adaptive 2-D 5-line adaptive comb filter for
core with power-save and power-down modes
composite video inputs; chroma-trap
80-terminal TQFP PowerPAD package
available
– Automatic video standard detection
(NTSC/PAL/SECAM) and switching
– Luma-peaking with programmable gain
– Patented chroma transient improvement
(CTI)
– Patented architecture for locking to weak,
noisy, or unstable signals
– Single 14.31818-MHz reference crystal for all
standards
– Line-locked internal pixel sampling clock
generation with horizontal and vertical lock
signal outputs
– Genlock output RTC format for downstream
video encoder synchronization
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
PowerPAD, DLP are trademarks of Texas Instruments.
3
Gemstar is a trademark of Gemstar-TV Guide Intermational.
4
Macrovision is a trademark of Macrovision Corporation.
5
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Copyright 2005–2010, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.