<dfn id="lbn0w"><tbody id="lbn0w"><dfn id="lbn0w"></dfn></tbody></dfn>
  • <form id="lbn0w"><meter id="lbn0w"><sup id="lbn0w"></sup></meter></form>
    參數資料
    型號: TPS62261DRV
    廠商: TEXAS INSTRUMENTS INC
    元件分類: 穩壓器
    英文描述: 1.2 A SWITCHING REGULATOR, 2500 kHz SWITCHING FREQ-MAX, PDSO6
    封裝: 2 X 2 MM, 0.80 MM HEIGHT, PLASTIC, SON-6
    文件頁數: 11/32頁
    文件大小: 1304K
    代理商: TPS62261DRV
    www.ti.com
    VIN
    GND
    EN
    FB
    SW
    TPS62261DRV
    L1
    2.2 H
    CIN
    4.7 F
    COUT
    10 F
    VOUT 1.8 V
    Upto600mA
    MODE
    VIN
    = 2.0Vto 6V
    OUTPUT VOLTAGE SETTING
    V
    OUT + VREF
    1 )
    R
    1
    R
    2 with an internal reference voltage V
    REF typical 0.6V.
    OUTPUT FILTER DESIGN (INDUCTOR AND OUTPUT CAPACITOR)
    Inductor Selection
    DIL + Vout
    1 *
    Vout
    Vin
    L
    (1)
    I
    Lmax + Ioutmax )
    DIL
    2
    (2)
    SLVS763B – JUNE 2007 – REVISED FEBRUARY 2008
    Figure 38. TPS62261 Fixed 1.8-V Output
    The output voltage can be calculated to:
    To minimize the current through the feedback divider network, R2 should be 180 k or 360 k. The sum of R1
    and R2 should not exceed ~1M, to keep the network robust against noise. An external feed forward capacitor
    C1 is required for optimum load transient response. The value of C1 should be in the range between 22pF and
    33pF.
    Route the FB line away from noise sources, such as the inductor or the SW line.
    The TPS62260 is designed to operate with inductors in the range of 1.5
    H to 4.7H and with output capacitors in
    the range of 4.7
    F to 22F. The part is optimized for operation with a 2.2H inductor and 10F output capacitor.
    Larger or smaller inductor values can be used to optimize the performance of the device for specific operation
    conditions. For stable operation, the L and C values of the output filter may not fall below 1
    H effective
    inductance and 3.5
    F effective capacitance.
    The inductor value has a direct effect on the ripple current. The selected inductor has to be rated for its dc
    resistance and saturation current. The inductor ripple current (
    ΔIL) decreases with higher inductance and
    increases with higher VI or VO.
    The inductor selection has also impact on the output voltage ripple in PFM mode. Higher inductor values will lead
    to lower output voltage ripple and higher PFM frequency, lower inductor values will lead to a higher output
    voltage ripple but lower PFM frequency.
    Equation 1 calculates the maximum inductor current in PWM mode under static load conditions. The saturation
    current of the inductor should be rated higher than the maximum inductor current as calculated with Equation 2.
    This is recommended because during heavy load transient the inductor current will rise above the calculated
    value.
    Copyright 2007–2008, Texas Instruments Incorporated
    19
    Product Folder Link(s): TPS62260 TPS62261 TPS62262 TPS62263
    相關PDF資料
    PDF描述
    TPS62262DRV 1.2 A SWITCHING REGULATOR, 2500 kHz SWITCHING FREQ-MAX, PDSO6
    TPS62270DRVR 0.84 A SWITCHING REGULATOR, 2500 kHz SWITCHING FREQ-MAX, PDSO6
    TPS62273DRVR 0.84 A SWITCHING REGULATOR, 2500 kHz SWITCHING FREQ-MAX, PDSO6
    TPS62291TDRVRQ1 1 A SWITCHING REGULATOR, 2500 kHz SWITCHING FREQ-MAX, PDSO6
    TPS62361BYZHT 4.3 A SWITCHING REGULATOR, 2500 kHz SWITCHING FREQ-MAX, BGA16
    相關代理商/技術參數
    參數描述
    TPS62261DRVR 功能描述:直流/直流開關調節器 2.25MHz 600mA Step- Down Converter RoHS:否 制造商:International Rectifier 最大輸入電壓:21 V 開關頻率:1.5 MHz 輸出電壓:0.5 V to 0.86 V 輸出電流:4 A 輸出端數量: 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:PQFN 4 x 5
    TPS62261DRVRG4 功能描述:直流/直流開關調節器 2.25MHz 600mA Step- Down Converter RoHS:否 制造商:International Rectifier 最大輸入電壓:21 V 開關頻率:1.5 MHz 輸出電壓:0.5 V to 0.86 V 輸出電流:4 A 輸出端數量: 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:PQFN 4 x 5
    TPS62261DRVT 功能描述:直流/直流開關調節器 2.25MHz 600mA Step- Down Converter RoHS:否 制造商:International Rectifier 最大輸入電壓:21 V 開關頻率:1.5 MHz 輸出電壓:0.5 V to 0.86 V 輸出電流:4 A 輸出端數量: 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:PQFN 4 x 5
    TPS62261DRVTG4 功能描述:直流/直流開關調節器 2.25MHz 600mA Step- Down Converter RoHS:否 制造商:International Rectifier 最大輸入電壓:21 V 開關頻率:1.5 MHz 輸出電壓:0.5 V to 0.86 V 輸出電流:4 A 輸出端數量: 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:PQFN 4 x 5
    TPS62261TDRVRQ1 功能描述:直流/直流開關調節器 2.25MHz 600mA Step- Down Converter RoHS:否 制造商:International Rectifier 最大輸入電壓:21 V 開關頻率:1.5 MHz 輸出電壓:0.5 V to 0.86 V 輸出電流:4 A 輸出端數量: 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:PQFN 4 x 5