<big id="pnfu0"></big>
  • <small id="pnfu0"><sup id="pnfu0"><pre id="pnfu0"></pre></sup></small>
  • 參數資料
    型號: TPS202X
    廠商: Texas Instruments, Inc.
    元件分類: 基準電壓源/電流源
    英文描述: USB POWER DISTRIBUTION
    中文描述: USB電源分布
    文件頁數: 9/19頁
    文件大小: 116K
    代理商: TPS202X
    USB Power Distribution for Self-Powered Hubs (Including Hosts)
    5
    TPS202x/3x and TPS204x/5x USB Power Distribution
    USB Power Distribution for Self-Powered Hubs (Including Hosts)
    Self-powered hubs (SPH) have a local power supply that powers nonremovable
    functions and the downstream ports (Figure 2). The hub must supply 5.25 V to
    4.75 V on the board side of the downstream connection under full-load and
    no-load conditions and is required to have current limit and report overcurrent
    conditions to USB software. Typical SPHs are desktop PCs, monitors, printers,
    and stand alone hubs.
    Power for the hub controller may be supplied by the local power supply or by the
    upstream voltage bus for loads up to 100 mA. The advantage of using the power
    from the upstream port is that communication to the hub controller is possible and
    the distinction between an unconnected and unpowered device can be made.
    Most hub controllers use 3.3-V supply voltage, and a low drop-out (LDO) voltage
    regulator is needed to regulate the 5-V bus voltage to 3.3 V.
    The number of downstream ports supported by self-powered hubs is limited by
    the current the local power supply can support and by safety concerns. Each port
    must be capable of supplying 5 unit loads and must limit current when the
    aggregate current drawn exceeds 5.0 A. The current limit should exceed the
    continuous current level of 500 mA by enough to ensure that dynamic-attach
    events and startup currents do not trip the overcurrent protection. Figure 2 shows
    a typical SPH.
    Hub Controller
    TUSB2070
    TUSB2040
    TUSB2140
    LDO
    Regulator
    TPS7133
    TPS7233
    LDO
    Regulator
    TPS7133
    TPS7233
    Nonremovable
    Function
    Current Limit
    TPS2041/51
    TPS2042/52
    TPS2044/54
    TPS2022/23/24
    TPS2032/33/34
    Current Limit
    TPS2041/51
    TPS2042/52
    TPS2044/54
    TPS2022/23/24
    TPS2032/33/34
    On/Off
    Local
    Power
    Supply
    500 mA/Port
    500 mA/Port
    Downstream
    Voltage Bus
    Downstream
    Voltage Bus
    Downstream Data Port
    Upstream Data Port
    Upstream
    Voltage Bus
    1 Unit Load (max)
    On/Off
    Figure 2. Self Powered Hub
    相關PDF資料
    PDF描述
    TPS204X USB POWER DISTRIBUTION
    TPS203X USB POWER DISTRIBUTION
    TPS2032P POWER-DISTRIBUTION SWITCHES
    TPS2033P POWER-DISTRIBUTION SWITCHES
    TPS2052P DUAL POWER-DISTRIBUTION SWITCHES
    相關代理商/技術參數
    參數描述
    TPS2030 制造商:TI 制造商全稱:Texas Instruments 功能描述:POWER-DISTRIBUTION SWITCHES
    TPS2030D 功能描述:電源開關 IC - USB 0.22A 2.7-5.5V Sngl Hi-Side MOSFET RoHS:否 制造商:Micrel 電源電壓-最小:2.7 V 電源電壓-最大:5.5 V 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:SOIC-8 封裝:Tube
    TPS2030D 制造商:Texas Instruments 功能描述:IC 300MA POWER DIST SW 8-SOIC 制造商:Texas Instruments 功能描述:IC, 300MA POWER DIST SW 8-SOIC 制造商:Texas Instruments 功能描述:IC, 300MA POWER DIST SW 8-SOIC; Primary Input Voltage:5.5V; No. of Outputs:1; Output Current:200mA; Voltage Regulator Case Style:SOIC; No. of Pins:8; Operating Temperature Min:-40C; Operating Temperature Max:85C; SVHC:No SVHC ;RoHS Compliant: Yes
    TPS2030D 制造商:Texas Instruments 功能描述:Analog Switch IC On-Resistance Rds(on):
    TPS2030DG4 功能描述:電源開關 IC - USB 0.22A 2.7-5.5V Sngl Hi-Side MOSFET RoHS:否 制造商:Micrel 電源電壓-最小:2.7 V 電源電壓-最大:5.5 V 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:SOIC-8 封裝:Tube