參數資料
型號： THS8083APZP
廠商： TEXAS INSTRUMENTS INC
元件分類： 消費家電
英文描述： SPECIALTY CONSUMER CIRCUIT, PQFP100
封裝： GREEN, PLASTIC, HTQFP-100
文件頁數： 10/63頁
文件大?。?/td> 320K
代理商： THS8083APZP
35
Two options exist for connecting a master clock:
A crystal can be connected between the XTL1-MCLK and XTL2 terminals. The device provides internal
oscillator circuitry.
A 3.3-V CMOS/TTL clock signal can be connected to XTL1-MCLK from an external oscillator. In this case
XTL2 must be left unconnected.
The port is designed to operate from a master clock frequency of 14.31818 MHz, which is a standard frequency in
video applications: 4x is the subcarrier frequency for NTSC. Many low-cost crystals are available for this frequency.
The default internal oscillator operates at 8x the master clock frequency, or about 114 MHz. This setting of 8x, which
is the value of the feedback divider in the analog PLL loop, is programmable (VCODIV register value). Normally this
remains as the default 8x value. Users can change this value when a master clock of a different frequency is
connected. In this case care should be taken to keep the internal high-frequency clock (i.e., master clock frequency
x analog feedback divider) lower than 120 MHz. The higher this internal frequency, the better the frequency resolution
of the DTO.
When a crystal is used as the master clock source, it is not advised to use another frequency than the recommended
14.31818 MHz, since the internal oscillator circuitry is not production tested at other frequencies. If another master
clock is used, it is recommended to drive XTL1MCLK by a direct clock signal. VCODIV should be programmed such
that the internal clock remains close to but less than 120 MHz.
14.31818 MHz
Phase-
Frequency
Detector
Loop
Filter
VCO
Programmable
Divider
3
VCODIV
VCOCLK
(To Digital PLL)
Figure 35. Analog PLL
3.6.2
Digital PLL
The digital PLL loop derives the ADC (pixel) clock frequency from the high-speed internal clock. A DTO generates
an output frequency from a user-programmable DTO increment. To operate over the 1380 MHz range, an extra DTO
clock output divider can be switched in. Appendix A shows the formula that relates the frequency of the internal
high-speed clock, the DTO increment value, and the DTO clock output divider to the PLL output frequency.
The PLL output, after the clock divider, is sent to the programmable feedback divider (TERM_CNT register value).
This value is typically programmed with the number of total pixels per line for a given video/graphics format. The
output of this divider is then one input to the phase-frequency detector. Its other input is typically the horizontal sync
(HS) reference of a graphics/video signal. HS needs to be provided as a separate TTL/CMOS type signal to the
dedicated input terminal. See the Composite Sync Slicer section to use the PLL in the case of input signals with a
composite sync. The polarity of HS is programmable (HS_POL register value).
Both HS and VS inputs on the THS8083A can accept a 3-V and a 5-V logic-compliant signal.
On the HS input, as on the VS input, a digital noise gate can be optionally switched in (HS_MS and VS_MS register
values, respectively). The user can program the minimum number of clock cycles that have to be present in HS and
VS before they are interpreted as a valid HS and VS. This avoids having any spikes being interpreted as an active
HS and falsely updating the PLL.
相關PDF資料
PDF描述
THS8083APZPG4 SPECIALTY CONSUMER CIRCUIT, PQFP100
THS8083CPZP SPECIALTY CONSUMER CIRCUIT, PQFP100
THS8133ACPHP PARALLEL, WORD INPUT LOADING, 0.005 us SETTLING TIME, 10-BIT DAC, PQFP48
THS8133BCPHP PARALLEL, WORD INPUT LOADING, 0.005 us SETTLING TIME, 10-BIT DAC, PQFP48
THS8133BCPHPG4 PARALLEL, WORD INPUT LOADING, 0.005 us SETTLING TIME, 10-BIT DAC, PQFP48
相關代理商/技術參數
參數描述
THS8083APZP 制造商:Texas Instruments 功能描述:8BIT ADC 80MSPS TRIPLE SMD 8083
THS8083APZPG4 功能描述:視頻模擬/數字化轉換器集成電路 Tr 8B 95MSPS 3.3V Vid & Graphics Dig RoHS:否 制造商:Texas Instruments 輸入信號類型:Differential 轉換器數量:1 ADC 輸入端數量:4 轉換速率:3 Gbps 分辨率:8 bit 結構: 輸入電壓:3.3 V 接口類型:SPI 信噪比: 電壓參考: 電源電壓-最大:3.45 V 電源電壓-最小:3.15 V 最大功率耗散: 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:TCSP-48 封裝:Reel
THS8083CPZP 制造商:Rochester Electronics LLC 功能描述:- Bulk
THS8083EVM 制造商:Texas Instruments 功能描述:THS8083EVM - Bulk
THS8083T 制造商:TI 制造商全稱:Texas Instruments 功能描述:Triple 8-Bit, 80 MSPS, 3.3-V Video and Graphics Digitizer With Digital PLL
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*