- 您現在的位置：買賣IC網 > PDF目錄98196 > TDA7466 (STMICROELECTRONICS) 2 CHANNEL(S), TONE CONTROL CIRCUIT, PDIP42 PDF資料下載
參數資料
| 型號： | TDA7466 |
| 廠商： | STMICROELECTRONICS |
| 元件分類： | 音頻控制 |
| 英文描述： | 2 CHANNEL(S), TONE CONTROL CIRCUIT, PDIP42 |
| 封裝： | 0.600 INCH, SDIP-42 |
| 文件頁數： | 19/21頁 |
| 文件大小： | 361K |
| 代理商： | TDA7466 |
Obsolete
Product(s)
- Obsolete
Product(s)
I
2C BUS INTERFACE
Data transmission from microprocessor to the
TDA7466 and viceversa takes place through the
2 wires I
2C BUS interface, consisting of the two
lines SDA and SCL (pull-up resistors to positive
supply voltage must be connected).
Data Validity
As shown in fig. 3, the data on the SDA line must
be stable during the high period of the clock. The
HIGH and LOW state of the data line can only
change when the clock signal on the SCL line is
LOW.
Start and Stop Conditions
As shown in fig.4 a start condition is a HIGH to
LOW transition of the SDA line while SCL is
HIGH. The stop condition is a LOW to HIGH tran-
sition of the SDA line while SCL is HIGH.
Byte Format
Every byte transferred on the SDA line must con-
tain 8 bits. Each byte must be followed by an ac-
knowledge bit. The MSB is transferred first.
Acknowledge
The master (
P) puts a resistive HIGH level on the
SDA line during the acknowledge clock pulse (see
fig. 5). The peripheral (audioprocessor) that ac-
knowledges has to pull-down (LOW) the SDA line
during this clock pulse.
The audioprocessor which has been addressed
has to generate an acknowledge after the recep-
tion of each byte, otherwise the SDA line remains
at the HIGH level during the ninth clock pulse
time. In this case the master transmitter can gen-
erate the STOP information in order to abort the
transfer.
Transmission without Acknowledge
Avoiding to detect the acknowledge of the audio-
processor, the
P can use a simpler transmission:
simply it waits one clock without checking the
slave acknowledging, and sends the new data.
This approach of course is less protected from
misworking.
Figure 3: Data Validity on the I
2CBUS
Figure 4: Timing Diagram of I
2CBUS
Figure 5: Acknowledge on the I
2CBUS
TDA7466
7/21
相關PDF資料 |
PDF描述 |
|---|---|
| TDA7467D013TR | SPECIALTY CONSUMER CIRCUIT, PDSO28 |
| TDA7467D013TR$ | SPECIALTY CONSUMER CIRCUIT, PDSO28 |
| TDA7468D | 2 CHANNEL(S), TONE CONTROL CIRCUIT, PDSO28 |
| TDA7468D13TR | 2 CHANNEL(S), TONE CONTROL CIRCUIT, PDSO28 |
| TDA7469A | 2 CHANNEL(S), TONE CONTROL CIRCUIT, PDSO20 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| TDA7466 | 功能描述:音頻 DSP DIGITALLY CONTROLLED AUDIO PROCESSOR RoHS:否 制造商:Texas Instruments 工作電源電壓: 電源電流: 工作溫度范圍: 安裝風格: 封裝 / 箱體: 封裝:Tube |
| TDA7466_03 | 制造商:STMICROELECTRONICS 制造商全稱:STMicroelectronics 功能描述:DIGITALLY CONTROLLED AUDIO PROCESSOR WITH SRS SURROUND SOUND AND VOICE CANCELLER |
| TDA7467 | 功能描述:音頻 DSP SRS Audio Matrix RoHS:否 制造商:Texas Instruments 工作電源電壓: 電源電流: 工作溫度范圍: 安裝風格: 封裝 / 箱體: 封裝:Tube |
| TDA7467 | 功能描述:音頻 DSP AUDIO MATRIX RoHS:否 制造商:Texas Instruments 工作電源電壓: 電源電流: 工作溫度范圍: 安裝風格: 封裝 / 箱體: 封裝:Tube |
| TDA7467D | 功能描述:音頻 DSP SRS Audio Matrix RoHS:否 制造商:Texas Instruments 工作電源電壓: 電源電流: 工作溫度范圍: 安裝風格: 封裝 / 箱體: 封裝:Tube |
發布緊急采購，3分鐘左右您將得到回復。