- 您現在的位置：買賣IC網 > PDF目錄383828 > SRC15ML SILICONE REMOVABLE COATING PDF資料下載
參數資料
| 型號： | SRC15ML |
| 英文描述： | SILICONE REMOVABLE COATING |
| 中文描述： | 可摘有機硅涂層 |
| 文件頁數： | 6/6頁 |
| 文件大小： | 25K |
| 代理商： | SRC15ML |
SRC
- 2 -
Spraying
Bulk
SRC
needs to be thinned with
SRC Thinners (DCT)
before spraying. The optimum viscosity to give
coating quality and thickness depends on the spray equipment and conditions but a starting point could be 2
parts coating to 1 part thinners. If bulk coating material has been agitated, allow to stand until air bubbles
have dispersed. The nozzle of the spray gun requires to be selected to give an even spray to suit the
viscosity of the coating material.
SRC
is suitable both for use in manual spray guns and computer controlled airless spray equipment that
only coats the required areas of the PCB, eliminating the need for masking.
To ensure penetration of the coating beneath the components and in confined spaces, spray the assembly
from all directions to give an even coating.
After spraying, the boards should be placed in an air-circulating drying cabinet and left to dry for 2 hours at
room temperature prior to any heat curing.
Brushing
Ensure that the coating material has been agitated thoroughly and has been allowed to settle for at least 2
hours. The coating should be kept at ambient temperature. Gently apply the coating with a good quality
brush so as not to leave brush marks and so that the components and wiring are not disturbed.
Drying Times and Curing Conditions
SRC
will dry in air within 4 to 12 hours at room temperature. This cure time can be reduced by the use of
moderate heat. The coating should be tack free within 20 minutes. Any heat cure must be started after the
coating has become tack free.
TYPICAL PROPERTIES
Colour:
Non-volatile Content:
Viscosity at 25°C :
Surface Resistivity (Ohms) :
Specific Gravity at 25°C:
Flash Point
Temperature Range:
Clear Translucent Fluid
33% approx.
45 mPa.s
2.2x10
11
1.03
20°C
-50°C to +125°C
PACKAGING
ORDER CODE
400ml aerosol
5 Litre Bulk
SRC400
SRC05L
Thinners
5 Litre Bulk
DCT05L
Copyright Electrolube 1997
All information is given in good faith but without warranty. Properties are given as a guide only and should not be taken as a specification.
Electrolube cannot be held responsible for the performance of its products within any application determined by the customer, who must
satisfy themselves as to the suitability of the product.
相關PDF資料 |
PDF描述 |
|---|---|
| SRC2405 | Analog IC |
| SRC2409 | Analog IC |
| SRC2412 | Analog IC |
| SRC2412B | Analog IC |
| SRC2415 | Analog IC |
相關代理商/技術參數 |
參數描述 |
|---|---|
| SRC-1A-S-12VDC | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:RELAY SPCO 12VDC |
| SRC-1A-S-24VDC | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:RELAY SPCO 24VDC |
| SRC-1A-S-5VDC | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:RELAY SPCO 5VDC |
| SRC-1A-SL-12VDC | 制造商:IMO 功能描述:IMO Subminiature Power Relay SPNO, 12A, 12VDC, 450mW,AgSnO2 Sealed, RoHS, 100mOh |
| SRC1W0R1JB | 制造商:MERITEK 制造商全稱:MERITEK ELECTRONICS CORPORATION 功能描述:Anti-Surge Resistor |
發布緊急采購，3分鐘左右您將得到回復。