參數資料
型號： RTL8201CP-LF
廠商： Electronic Theatre Controls, Inc.
英文描述： SINGLE-CHIP/SINGLE-PORT 10/100M FAST ETHERNET PHYCEIVER (With Auto Crossover)
中文描述： SINGLE-CHIP/SINGLE-PORT個10/100M快速以太網PHYCEIVER（自動交叉）
文件頁數： 13/38頁
文件大?。?/td> 512K
代理商： RTL8201CP-LF
RTL8201CP
Datasheet
Single-Chip/Port 10/100 Fast Ethernet PHYceiver
8
Track ID: JATR-1076-21 Rev. 1.21
6. Register Descriptions
This section describes the functions and usage of the registers available in the RTL8201CP.
In this section the following abbreviations are used:
RO: Read Only
RW: Read/Write
6.1. Register 0 Basic Mode Control Register
Table 9. Register 0 Basic Mode Control Register
Description
This bit sets the status and control registers of the PHY in a default
state. This bit is self-clearing.
1: Software reset
0: Normal operation
This bit enables loopback of transmit data nibbles TXD3:0 to the
receive data path.
1: Enable loopback
0: Normal operation
This bit sets the network speed.
1: 100Mbps
0: 10Mbps
After completing auto negotiation, this bit will reflect the Speed status.
1: 100Base-T
0: 10Base-T)
When 100Base-FX mode is enabled, this bit=1 and is read only.
This bit enables/disables the NWay auto-negotiation function.
1: Enable auto-negotiation; bits 0:13 and 0:8 will be ignored.
0: Disable auto-negotiation; bits 0:13 and 0:8 will determine the link
speed and the data transfer mode, respectively.
When 100Base-FX mode is enabled, this bit=0 and is read only.
Power Down This bit turns down the power of the PHY chip, including the internal
crystal oscillator circuit. The MDC, MDIO is still alive for accessing
the MAC.
1: Power down
0: Normal operation
Reserved
Restart Auto
Negotiation
1: Re-start auto-negotiation
0: Normal operation
Duplex
Mode
(bit 0:12=0).
1: Full duplex
0: Half duplex
After completing auto-negotiation, this bit will reflect the duplex status.
1: Full duplex
0: Half duplex
Reserved
Address
0:15
Name
Reset
Mode
RW
Default
0
0:14
Loopback
RW
0
0:13
Spd_Set
RW
0
0:12
Auto
Negotiation
Enable
RW
1
0:11
RW
0
0:10
0:9
This bits allows the NWay auto-negotiation function to be reset.
RW
0
0:8
This bit sets the duplex mode if auto-negotiation is disabled
RW
0
0:7:0
相關PDF資料
PDF描述
RTL8201CP-VD SINGLE-CHIP/SINGLE-PORT 10/100M FAST ETHERNET PHYCEIVER (With Auto Crossover)
RTL8201CP-VD-LF SINGLE-CHIP/SINGLE-PORT 10/100M FAST ETHERNET PHYCEIVER (With Auto Crossover)
RT ECONOLINE - DC/DC - CONVERTER
S101032SS02BE Slide Switches
S101031SS02B Slide Switches
相關代理商/技術參數
參數描述
RTL8201CP-VD 制造商:未知廠家 制造商全稱:未知廠家 功能描述:SINGLE-CHIP/SINGLE-PORT 10/100M FAST ETHERNET PHYCEIVER (With Auto Crossover)
RTL8201CP-VD-LF 制造商:WIZnet Co Ltd 功能描述:Physical I/F Chip+Auto-Crossover,Realtek 制造商:Realtek Semiconductor 功能描述: 制造商:WIZnet Co Ltd 功能描述:IC,RTL8201CP-VD-LF 制造商:WIZNET INC 功能描述:IC,RTL8201CP-VD-LF
RTL8201CP電路圖-1 制造商:未知廠家 制造商全稱:未知廠家 功能描述:RTL8201CP電路圖-1
RTL8201CP電路圖-3 制造商:未知廠家 制造商全稱:未知廠家 功能描述:RTL8201CP電路圖-3
RTL8201EL 制造商:Realtek Semiconductor 功能描述:IC,LAN TRANSCEIVER,SINGLE,CMOS,QFP,48PIN,PLASTIC
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*