參數資料
型號: R1448NS20K
廠商: WESTCODE SEMICONDUCTORS LTD
元件分類: 晶閘管
英文描述: 2916 A, 2000 V, SCR
文件頁數: 8/12頁
文件大小: 594K
代理商: R1448NS20K
WESTCODE
WESTCODE An IXYS Company
Distributed Gate Thyristor Types R1448NS14# to R1448NS20#
Data Sheet. Type R1448NS14# to R1448NS20# Issue 2
Page 5 of 12
August, 2003
15.0 Reverse Recovery Loss
15.1 Determination by Measurement
From waveforms of recovery current obtained from a high frequency shunt (see Note 1, Page 5) and
reverse voltage present during recovery, an instantaneous reverse recovery loss waveform must be
constructed. Let the area under this waveform be E joules per pulse. A new heat sink temperature can
then be evaluated from the following:
()
(
)
Hs
J
th
original
SINK
new
SINK
R
f
k
E
T
+
=
)
(
)
(
Where k=0.227 (°C/W)/s
E = Area under reverse loss waveform per pulse in joules (W.s.)
f = rated frequency Hz at the original heat sink temperature.
Rth(J-Hs) = d.c. thermal resistance (°C/W).
The total dissipation is now given by:
f
E
W
(original)
(TOT)
+
=
15.2 Determination without Measurement
In circumstances where it is not possible to measure voltage and current conditions, or for design
purposes, the additional losses E in joules may be estimated as follows.
Let E be the value of energy per reverse cycle in joules (curves in Figure 9).
Let f be the operating frequency in Hz
()
(
)
()
f
R
E
T
th
original
SINK
new
SINK
=
Where TSINK (new) is the required maximum heat sink temperature and
TSINK (original) is the heat sink temperature given with the frequency ratings.
A suitable R-C snubber network is connected across the thyristor to restrict the transient reverse voltage
to a peak value (Vrm) of 67% of the maximum grade. If a different grade is being used or Vrm is other than
67% of Grade, the reverse loss may be approximated by a pro rata adjustment of the maximum value
obtained from the curves.
NOTE 1- Reverse Recovery Loss by Measurement
This thyristor has a low reverse recovered charge and peak reverse recovery current. When measuring
the charge, care must be taken to ensure that:
(a) a.c. coupled devices such as current transformers are not affected by prior passage of high
amplitude forward current.
(b) A suitable, polarised, clipping circuit must be connected to the input of the measuring oscilloscope
to avoid overloading the internal amplifiers by the relatively high amplitude forward current signal
(c) Measurement of reverse recovery waveform should be carried out with an appropriate critically
damped snubber, connected across diode anode to cathode. The formula used for the calculation
of this snubber is shown below:
dt
di
S
r
C
V
R
= 4
2
Where:
Vr
CS
R
=
Commutating source voltage
Snubber capacitance
Snubber resistance
相關PDF資料
PDF描述
R1500J108B-T1-F 10.8 V FIXED POSITIVE LDO REGULATOR, 0.155 V DROPOUT, PSSO5
R1500J109B-T1-F 10.9 V FIXED POSITIVE LDO REGULATOR, 0.155 V DROPOUT, PSSO5
R1500J110B-T1-F 11 V FIXED POSITIVE LDO REGULATOR, 0.155 V DROPOUT, PSSO5
R1500J111B-T1-F 11.1 V FIXED POSITIVE LDO REGULATOR, 0.155 V DROPOUT, PSSO5
R1500J112B-T1-F 11.2 V FIXED POSITIVE LDO REGULATOR, 0.155 V DROPOUT, PSSO5
相關代理商/技術參數
參數描述
R1449/S 制造商:Rochester Electronics LLC 功能描述:
R144BK 制造商:Apex Tool Group 功能描述:1/4 IN. X 4 IN. REGULAR ROUND BLADE SCREWDRIVER, AMBER HANDLE
R14-4C 功能描述:端子 R14-4C 100/BAG 12-4S 80068 RoHS:否 制造商:AVX 產品:Junction Box - Wire to Wire 系列:9826 線規:26-18 接線柱/接頭大小: 絕緣: 顏色:Red 型式:Female 觸點電鍍:Tin over Nickel 觸點材料:Beryllium Copper, Phosphor Bronze 端接類型:Crimp
R144FPL1.38.03 功能描述:4C/14 SBC UNSH TYPE FPLR RoHS:是 類別:線纜,導線 >> 多芯導線 系列:* 標準包裝:1 系列:- 纜線類型:多芯 導線數:4 線規:12 AWG 線束:65 股 / 30 AWG 導線材料:裸銅 套管類型:Carolprene 套管直徑:0.475"(12.07mm) 屏蔽類型:- 長度:250'(76.2m) 額定值:- 特點:- 顏色:黃 電壓:300V 工作溫度:-40°C ~ 90°C 使用:- 線芯絕緣:- 套管(絕緣體)厚度:0.030"(0.76mm) 屏蔽材料:- 屏蔽覆蓋范圍:-
R144FPL1.40.03 功能描述:14 AWG 4C SOLID BC RISER RED RoHS:是 類別:線纜,導線 >> 多芯導線 系列:* 標準包裝:1 系列:*