- 您現在的位置：買賣IC網 > PDF目錄299824 > R1130H251A-T2 (RICOH COMPANY LTD) 2.5 V FIXED POSITIVE LDO REGULATOR, 0.49 V DROPOUT, PDSO6 PDF資料下載
參數資料
| 型號： | R1130H251A-T2 |
| 廠商： | RICOH COMPANY LTD |
| 元件分類： | 固定正電壓單路輸出LDO穩壓器 |
| 英文描述： | 2.5 V FIXED POSITIVE LDO REGULATOR, 0.49 V DROPOUT, PDSO6 |
| 封裝： | SOT-89, 5 PIN |
| 文件頁數： | 17/24頁 |
| 文件大小： | 739K |
| 代理商： | R1130H251A-T2 |
24
4317K–AVR–03/2013
AT90PWM2/3/2B/3B
When the write access time has elapsed, the EEWE bit is cleared by hardware. The user soft-
ware can poll this bit and wait for a zero before writing the next byte. When EEWE has been set,
the CPU is halted for two cycles before the next instruction is executed.
Bit 0 – EERE: EEPROM Read Enable
The EEPROM Read Enable Signal EERE is the read strobe to the EEPROM. When the correct
address is set up in the EEAR Register, the EERE bit must be written to a logic one to trigger the
EEPROM read. The EEPROM read access takes one instruction, and the requested data is
available immediately. When the EEPROM is read, the CPU is halted for four cycles before the
next instruction is executed.
The user should poll the EEWE bit before starting the read operation. If a write operation is in
progress, it is neither possible to read the EEPROM, nor to change the EEAR Register.
The calibrated Oscillator is used to time the EEPROM accesses. Table 6-2 lists the typical pro-
gramming time for EEPROM access from the CPU.
The following code examples show one assembly and one C function for writing to the
EEPROM. The examples assume that interrupts are controlled (e.g. by disabling interrupts glob-
ally) so that no interrupts will occur during execution of these functions. The examples also
assume that no Flash Boot Loader is present in the software. If such code is present, the
EEPROM write function must also wait for any ongoing SPM command to finish.
Table 6-2.
EEPROM Programming Time.
Symbol
Number of Calibrated RC Oscillator Cycles
Typ Programming Time
EEPROM write
(from CPU)
26368
3.3 ms
相關PDF資料 |
PDF描述 |
|---|---|
| R1130H251B-T1 | 2.5 V FIXED POSITIVE LDO REGULATOR, 0.49 V DROPOUT, PDSO6 |
| R1130H261A-T1 | 2.6 V FIXED POSITIVE LDO REGULATOR, 0.34 V DROPOUT, PDSO6 |
| R1130H261A-T2 | 2.6 V FIXED POSITIVE LDO REGULATOR, 0.34 V DROPOUT, PDSO6 |
| R1130H261B-T1 | 2.6 V FIXED POSITIVE LDO REGULATOR, 0.34 V DROPOUT, PDSO6 |
| R1130H261B-T2 | 2.6 V FIXED POSITIVE LDO REGULATOR, 0.34 V DROPOUT, PDSO6 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| R1130HXXXX | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Power Management ICs |
| R1131 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Optoelectronic |
| R11-3-1.00A-B06EV-S | 制造商:Sensata Technologies 功能描述:Circuit Breaker Magnetic Circuit Protectors 1Pole 1A |
| R11-3-1.00A-B101EV-S | 制造商:Sensata Technologies 功能描述:Circuit Breaker Magnetic Circuit Protectors 1Pole 1A |
| R11-3-10.0A-29865-1 | 制造商:Airpax 功能描述:CIRCUIT BREAKER MAG-HYDR ROCKER 制造商:Sensata Technologies 功能描述:R11-3-10.0A-29865-1 /Pole # 1 /Prod Family: 0213 |
發布緊急采購，3分鐘左右您將得到回復。