
Application Notes
For technical support and more information, see inside back cover or visit www.ti.com
PT3320/3340 Series
VDE Approved Installation Instructions (Installationsanleitung)
Nennspannnug (Rated Voltage):
PT3320 36 to 72 Vdc, Transient to 75Vdc
PT3340 18 to 60 Vdc
Nennaufnahme (Rated Input):
PT3320 1.5 Adc
PT3340 3.0 Adc
Nennleistung (Rated Power):
30 Watts Maximum
Ausgangsspannung (Sec. Voltage): PT3320 Series
PT3340 Series
PT3321, 3.3 Vdc, 8.0 Adc
PT3341, 3.3 Vdc, 8.0 Adc
PT3322, 5.0 Vdc, 6.0 Adc
PT3342, 5.0 Vdc, 6.0 Adc
Ausgangsstrom (Sec. Current):
PT3323, 12.0 Vdc, 2.5 Adc
PT3343,12.0 Vdc, 2.5 Adc
oder (or)
PT3324, 15.0 Vdc, 2.0 Adc
PT3344,15.0 Vdc, 2.0 Adc
Ausgangsleistung (Sec. Power):
PT3325, 2.0 Vdc, 8.0 Adc
PT3326, 2.5 Vdc, 8.0 Adc
PT3327, 1.8 Vdc, 8.0 Adc
PT3328, 5.2 Vdc, 6.0 Adc
PT3329, 6.0 Vdc, 5.0 Adc
PT3330, 8.0 Vdc, 3.75 Adc
PT3331, 9.0 Vdc, 3.3 Adc
Angabe der Umgebungstemperatur
(Information on ambient temperature): +85°C Ambient or 100°C Case Maximum
Besondere Hinweise (Special Instructions):
Es ist vorzusehen, da die Spannungsversorgung in einer Endanwendung über eine isolierte
Sekundaerschaltung bereit gestellt wird. Die Eingangspannung der Spannungsversorgungsmodule muss
eine verstaerkte Isolierung von der Wechselstromquelle aufweisen.
Die Spannungsversorgung muss gemaess den Gehaeuse-, Montage-, Kriech- und Luftstrecken-,
Markierungs- und Trennanforderungen der Endanwendung installiert werden. Bei Einsatz eines TNV-3-
Einganges muss die SELV-Schaltung ordnungsgemaess geerdet werden.
(The power supply is intended to be supplied by isolated secondary circuitry in an end use application.
The input power to these power supplies shall have reinforced insulation from the AC mains.
The power supply shall be installed in compliance with the enclosure, mounting, creepage, clearance,
casualty, markings, and segregation requirements of the end-use application. When the input is TNV-3,
the SELV circuitry must be reliably grounded.)
Offenbach,
VDE Prüf- und Zertifizierungsinstitut
Abteilung /
Department TD
(Jürgen Brwinkel)
Ort /
Place:
Datum /
Date:
(Stempel und Unterschrift des Herstellers / Stamp
and signature of the manufacturer)