![](http://datasheet.mmic.net.cn/Pericom/PI7C9X442SLBFDE_datasheet_99388/PI7C9X442SLBFDE_1.png)
Pericom Semiconductor Corp.
www.pericom.com
Page 1 of 1
8/19/2010
PCI Express
and PCIe are registered trademarks of PCI-SIG www.pcisig.org | USB is a trademark of USB Implementers Forum, Inc
Pericom
is a registered trademark of Pericom Semiconductor Corp.
Product:
PCI Express
(PCIe) to USB 2.0 Swidge
Part Numbers: PI7C9X442SL
Product Description
The PI7C9X442SL PCI Express
to USB
2.0 Swidge is
designed to meet the latest low-power, lead (Pb)-free and green
system requirements.
The PI7C9X442SL is a cost-effective
solution that can be implemented in systems such as volume
servers, embedded systems, motherboards, laptops, docking
stations, peripherals, PC add-in cards and other footprint
sensitive platforms requiring multiple USB host connections.
The PI7C9X442SL provides one x1 upstream PCIe port, two x1
downstream PCIe ports, and up to 4 USB 2.0 host controller
ports. The PI7C9X442SL provides users the flexibility to expand
or fan-out from a wide range of I/O Bridges such as IOH, PCH,
ICH, embedded MCU and other Application Specific ICs.
Industry Specifications Compliance
PCIe Base Specification, Revision 1.1
PCIe CEM Specification, Revision 1.1
PCI-to-PCI Bridge Architecture Spec., Rev 1.2
Advanced Configuration Power Interface (ACPI)
Specification
Universal Serial Bus (USB) 2.0 Compliant (1.5/12/480
Mbps)
Universal Serial Bus(USB) EHCI 1.0a/OHCI 1.0 Compliant
System Management (SM) Bus, 1.0 Compliant
PCI Express Packet Switch Features
One x1 PCIe 1.1 upstream port and two x1 PCIe 1.1
downstream ports
Supports “Cut-through”(Default) as well as “Store and
Forward” mode for packet switching
150 ns typical latency for packet routed through Switch
without blocking
Non-blocking full-wired switching capability at 16 Gbps
when all 3 PCI Express ports and all 4 USB 2.0 ports are
enabled
Advanced Power Saving
o
Empty downstream ports are set to idle state to
minimize power consumption
Link Power Management
o
Supports L0, L0s, L1, L2, L2/L3Ready and L3 link
power state
o
Active state power management for L0s and L1
state
o
PME# support in L2 state
Device State Power Management
o
Supports D0, D3Hot and D3Cold device power
state
o
3.3V Aux Power support in D3Cold power state
Port Arbitration: Round Robin (RR), Weighted RR and
Time-based Weighted RR
Supports up to 256-byte maximum payload size
Programmable driver current and de-emphasis level at
each PCIe port
Reliability, Availability and Serviceability
USB 2.0 Host Controller Features
USB Root hub with 4 (max.) downstream facing ports which
are shared by OHCI and EHCI host controllers
All USB downstream facing ports can handle High Speed
(480 Mbps), Full Speed (12 Mbps) and Low Speed (1.5
Mbps) transactions
PCI multi-function device consists of two OHCI host
controllers for Full Speed/Low Speed signaling and one
EHCI host controller for High Speed signaling
USB Host Controller operational registers directed-mapped
to PCI
General Features
Strapped pins configurable with optional EEPROM or
SMBus interface support
Industrial Temperature Range -40
o to 85o
128-pin LQFP 14mm x 14mm package
Applications
Notebook
PC Motherboard
Notebook Docking Stations
Embedded system
Volume Servers
Multifunction Printers
Consumer electronics
Peripheral
PC Add-in card/ Express card
Industrial PC
Telecom/Networking
SOHO router
PI7C9X442SL
Root
Complex
Host
CPU
x1 PCIe
USB 2.0
PCIe
Endpoint
PCIe
Endpoint
PI7C9X442SL – Block Diagram
Order Information
PART NUMBER
PACKAGE
PB-FREE & GREEN
TEMPERATURE
PI7C9X442SLFDE
128 LQFP
YES
-40
oC TO 85oC
PI7C9X442SLEVB
Board
Evaluation kit for PI7C9X442SL