參數資料
型號: PE1145MF-FREQ-OUT7
廠商: PLETRONICS INC
元件分類: XO, clock
英文描述: CRYSTAL OSCILLATOR, CLOCK, 10 MHz - 170 MHz, PECL OUTPUT
文件頁數: 1/1頁
文件大?。?/td> 38K
代理商: PE1145MF-FREQ-OUT7
PE1145M PECL Series
Differential PECL Output without Enable/ Disable Function
10.00 MHz – 170.00 MHz
Standard Specifications
Overall Frequency Stability
Operating Temperature Range
0 to +80°C is standard, but can be extended to - 40 to +85°C for certain frequencies
Consult factory for available frequencies and specs. Not all options available for all frequencies. A special part number may be assigned.
See PE1145T for higher frequencies
Supply Voltage (Vcc)
3.3 volts ± 10% standard, but 5.0 volts or 2.5 volts also available
Output Waveform
PECL with Differential Output
Logic “1”
Vcc - 1.025 volts minimum
Logic “0”
Vcc - 1.620 volts maximum
Output Load
Output must be terminated into 50 ohms to (Vcc - 2.0 V). See Test Circuit 5 and Note 1.
Part Numbering Guide
Model
Frequency Stability
45 = ± 50 PPM
44 = ± 25 PPM
Frequency in MHz
Special Specifications (choose all that apply)
E: Extended Operating Temperature Range (- 40 to +85 C)
F: 47.5 /52.5% Symmetry at 50% of Vcc
V: Supply Voltage of 3.3 volts ± 10%
W: Supply Voltage of 2.5 volts ± 5%
Y: Supply Voltage of 5.0 volts ± 10%
PE11 45 M Y -- 70.0M
°
20 = ± 20 PPM
Symmetry
Tr & Tf
45/55% to 55/45% at 50% of Vcc level standard, tighter symmetry available
1.0 nS max (20 to 80%) for 70 MHz.
For < 70 MHz, consult factory
60 to 70 mA typical, 90 mA maximum for 70 MHz.
For < 70 MHz, consult factory
Supply Current (Icc)
1 pS RMS maximum, from 12 kHz to 20 MHz from carrier for 70 MHz.
For < 70 MHz, consult factory
Jitter
In the typical PECL 100K logic output Voh is 2.35 volts and Vol is 1.60 volts at 3.3 Vcc. The center voltage of the PECL is therefore1.975 volts.
If a 50 ohm resistor is placed between the output and Vcc – 2 volts (1.3 volts), the current through the resistor is (1.975 – 1.3) / 50 = 13.5 mA.
The same load can be simulated by a resistor of 147 ± 1% ohms to ground (1.975 / 0.0135 = 146.29 ohms). If additional load current is placed
on the output, its load current must be subtracted from the 13.5 mA to calculate a new load resistor. Using similar calculations, use 274 ± 1%
ohms to ground for 5.0V operation.
(425) 776 -1880, Fax: (425) 776-2760, ple-sales@pletronics.com, www.pletronics.com
Pl tronics, Inc.
Frequency Stability is inclusive of frequency shifts due to calibration, temperature, supply voltage, shock, vibration and load
± 50 PPM, ± 25 PPM, ± 20 PPM over Operating Temperature Range
4 Lead Thru-Hole Metal Clock Oscillator
Packaging
Tube
Note 1:
(see Waveform 2)
Mechanical:
not to scale
inches (mm)
Due to part size and factory abilities, part marking may vary from lot to lot and may contain our part number or an internal code.
May 2002
.807 (20.5) MAX
PLETRONICS
.500
(12.7)
MAX
.200 (5.08) MAX
.600 (15.24)
.300
(7.62)
1
7
14
8
QN Out
Vcc
Q Out
GND
.031 (0.8)
.250 (6.35) MAX
.020
(.51)
Pl tronics, Inc.
19013 36th Ave. W, Suite H Lynnwood, WA 98036 USA
Manufacturer of High Quality Frequency Control Products
.
相關PDF資料
PDF描述
PE30DBANAC Fully Sealed Container Cermet Potentiometers Military and Professional Grade
PE30DBANAL Fully Sealed Container Cermet Potentiometers Military and Professional Grade
PE30DBANAM Fully Sealed Container Cermet Potentiometers Military and Professional Grade
PE30LPRPAC Fully Sealed Container Cermet Potentiometers Military and Professional Grade
PE30LPRPAL Fully Sealed Container Cermet Potentiometers Military and Professional Grade
相關代理商/技術參數
參數描述
PE1145MV 制造商:PLETRONICS 制造商全稱:Pletronics, Inc. 功能描述:PE11M Series 3.3 V PECL Clock Oscillators
PE1145TEV 制造商:PLETRONICS 制造商全稱:Pletronics, Inc. 功能描述:PE11T Series 3.3 V PECL Clock Oscillators
PE1145TV 制造商:PLETRONICS 制造商全稱:Pletronics, Inc. 功能描述:PE11T Series 3.3 V PECL Clock Oscillators
PE11472K100 制造商:FDY 功能描述:AF247X100 LOC: 1890I
PE11-472K100 制造商:FDY 功能描述:AF247X100 LOC: 1890I