<samp id="pz717"><label id="pz717"><legend id="pz717"></legend></label></samp>
<dd id="pz717"></dd>
<i id="pz717"></i>
  • 參數資料
    型號: PCD5013H
    廠商: NXP SEMICONDUCTORS
    元件分類: 尋呼電路
    英文描述: FLEX roaming decoder II
    中文描述: TELECOM, PAGING DECODER, PQFP32
    封裝: 7 X 7 MM, 1.40 MM HEIGHT, PLASTIC, SOT-358-1, LQFP-32
    文件頁數: 42/76頁
    文件大小: 270K
    代理商: PCD5013H
    1999 Apr 12
    42
    Philips Semiconductors
    Product specification
    FLEX
    roaming decoder II
    PCD5013
    8.7.5
    S
    HORT MESSAGE
    /
    TONE
    -
    ONLY VECTOR PACKET
    V:
    vector type identifier, these bits set to 010 for a
    short message/tone-only vector (Table 42).
    WN:
    word number of vector (2 to 87 decimal) (Table 42).
    WN describes the location of the vector word in the frame.
    e:
    error (Table 42). Set if more than 2-bit errors are
    detected in the word, if the check character calculation fails
    after error correction has been performed, or if the vector
    value is determined to be invalid.
    p:
    phase (Table 42). This is the phase on which the vector
    was found (0 = A, 1 = B, 2 = C and 3 = D).
    t:
    message type (Tables 42 and 43). These bits define the
    meaning of the d bits in this packet.
    x:
    unused bits (Table 42). The value of these bits is not
    guaranteed.
    d:
    data bits whose definition depends on the value of t in
    this packet according to Table 43. Note that if this vector is
    received on a long address and the e bit in this packet is
    not set, the decoder sends a message packet from the
    word location immediately following the vector packet.
    Except for the short message on a non-network address
    (t = 0), all messages bits in the message packet are
    unused and should be ignored.
    Table 42
    Short message/tone-only vector packet bit assignments
    Table 43
    Short message/tone-only vector definitions; note 1
    Notes
    1.
    When this vector is sent in conjunction with a Network Address, the t
    1
    ,t
    o
    value ‘00’ represents Network ID information.
    In this case the bit definitions are: T3 T2 T1 T0 M2 M1 M0 A4 A3 A2 A1 A0
    Where T are Traffic Management Flags, M represents a multiplier and A is the service area.
    For long addresses, an extra 5 characters are sent in the message packet immediately following the vector packet.
    t
    0
    and t
    1
    are also set to ‘00’ when defining the last 12 bits of a Network Address.
    2.
    BYTE
    BIT 7
    BIT 6
    BIT 5
    BIT 4
    BIT 3
    BIT 2
    BIT 1
    BIT 0
    3
    2
    1
    0
    0
    e
    x
    d
    5
    WN
    6
    p
    1
    x
    d
    4
    WN
    5
    p
    0
    d
    11
    d
    3
    WN
    4
    x
    d
    10
    d
    2
    WN
    3
    x
    d
    9
    d
    1
    WN
    2
    V
    2
    d
    8
    d
    0
    WN
    1
    V
    1
    d
    7
    t
    1
    WN
    0
    V
    0
    d
    6
    t
    0
    t
    1
    0
    0
    1
    t
    0
    0
    1
    0
    d
    11
    c
    3
    s
    8
    s
    1
    d
    10
    c
    2
    s
    7
    s
    0
    d
    9
    c
    1
    s
    6
    R
    0
    d
    8
    c
    0
    s
    5
    N
    5
    d
    7
    b
    3
    s
    4
    N
    4
    d
    6
    b
    2
    s
    3
    N
    3
    d
    5
    b
    1
    s
    2
    N
    2
    d
    4
    b
    0
    s
    1
    N
    1
    d
    3
    a
    3
    s
    0
    N
    0
    d
    2
    a
    2
    S
    2
    S
    2
    d
    1
    a
    1
    S
    1
    S
    1
    d
    0
    a
    0
    S
    0
    S
    0
    DESCRIPTION
    first 3 numeric characters; note 2
    8 sources (S) and 9 unused bits (s)
    8 sources (S), message retrieval
    flag (R), message number (N) and
    2 unused bits (s)
    spare message type
    1
    1
    相關PDF資料
    PDF描述
    PCD5032 ADPCM CODEC for digital cordless telephones
    PCD5032H ADPCM CODEC for digital cordless telephones
    PCD5032T ADPCM CODEC for digital cordless telephones
    PCD5041 DECT burst mode controller
    PCD5041H DECT burst mode controller
    相關代理商/技術參數
    參數描述
    PCD5032 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:ADPCM CODEC for digital cordless telephones
    PCD5032B 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Linear CODEC
    PCD5032D 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Linear CODEC
    PCD5032H 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:ADPCM CODEC for digital cordless telephones
    PCD5032T 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:ADPCM CODEC for digital cordless telephones