參數資料
型號: PC8265A
英文描述: PC8265A [Updated 9/03. 59 Pages]
中文描述: PC8265A [更新9 / 03。 59頁]
文件頁數: 54/59頁
文件大?。?/td> 455K
代理商: PC8265A
54
PC8265A PowerQUICC II
5336A–HIREL–08/03
Notes:
1. The user should verify that all buses and functions run frequencies that are within the supported ranges.
2. The frequency depends on the value of PCI_MODCK. If PCI_MODCK is high (logic ‘1’), the PCI frequency is divided by 2
(33 instead of 66 MHz, etc.) and the CPM multiplication factor is multiplied by 2.
3. Input clock frequency is given only for the purpose of reference. MODCK_H–MODCK_L should be set so that the resulting
configuration does not exceed the frequency rating of the user’s part.
Example. If a part is rated at 266 MHz CPU, 200 MHz CPM, and 66 MHz bus, any of the following are possible
(note that the three input clock frequencies are only three of many possible input clock frequencies):
1.
50 MHz input clock, MODCK_H–MODCK_L[0110–011] (with a core multiplication factor of 4, a CPM multiplica-
tion factor of 4, and a bus division factor of 3), and PCI_MODCK = 0 (see note 2 above). The PCI frequency is
50 MHz and the resulting configuration equals the part’s maximum possible frequencies of 266 MHz CPU,
200 MHz CPM, and 66 MHz 60x bus.
2.
66 MHz input clock, MODCK_H–MODCK_L[0100–001], and PCI_MODCK = 1 (see note 2 above) to achieve a
PCI frequency of 33 MHz and a configuration of 200MHz CPU, 200 MHz CPM, and 66 MHz 60x bus.
3.
40 MHz input clock, MODCK_H–MODCK_L[1001–011], and PCI_MODCK = 0 (see note 2 above) to achieve a
PCI frequency of 40 MHz and a configuration of 160 MHz CPU, 160 MHz CPM, and 40 MHz 60x bus.
Note that with each of the examples, any one of several values for MODCK_H–MODCK_L could possibly be used
as long as the resulting configuration does not exceed the part’s rating.
4. Core frequency = (60x bus frequency) (core multiplication factor)
5. Bus frequency = CPM frequency/bus division factor
6. In this mode, PCI_MODCK must be “1”.
MODCK_H –
MODCK[1–3]
Input Clock
Frequency
(PCI)
(2)(3)
CPM
Multiplication
Factor
(2)
CPM
Frequency
Core
Multiplication
Factor
Core
Frequency
(
4)
Bus
Division
Factor
60x Bus
Frequency
(
5)
1010_000
66/33 MHz
4/8
266 MHz
2.5
222 MHz
3
88 MHz
1010_001
66/33 MHz
4/8
266 MHz
3
266 MHz
3
88 MHz
1010_010
66/33 MHz
4/8
266 MHz
3.5
300 MHz
3
88 MHz
1010_011
66/33 MHz
4/8
266 MHz
4
350 MHz
3
88 MHz
1010_100
66/33 MHz
4/8
266 MHz
4.5
400 MHz
3
88 MHz
1011_000
66/33 MHz
4/8
266 MHz
2
212MHz
2.5
106 MHz
1011_001
66/33 MHz
4/8
266 MHz
2.5
265 MHz
2.5
106 MHz
1011_010
66/33 MHz
4/8
266 MHz
3
318 MHz
2.5
106 MHz
1011_011
66/33 MHz
4/8
266 MHz
3.5
371 MHz
2.5
106 MHz
1011_100
66/33 MHz
4/8
266 MHz
4
424 MHz
2.5
106 MHz
Table 19.
Clock Configuration Modes in PCI Agent Mode
(1)
(Continued)
相關PDF資料
PDF描述
PC826 Hgh -w=der Vtige, Hgh Density Mounting Type Photocoupler
PC8582FAMILY I2C Serial EEPROM
PC87431H
PC87782
PC87911
相關代理商/技術參數
參數描述
PC8265AMTPUMHBC 制造商:e2v technologies 功能描述:BASED COMMUNICATIONS PROCESSOR 480TBGA - Trays
PC826N 制造商:Laird Technologies Inc 功能描述:CELL BAND 880-960 MHZ, 6 ELEMENT, 11 DBI YAGI ANTENNA WITH 12 OF COAXIAL CABLE TERMINATED IN A TYPE N FEMALE CONNECTOR
PC827 功能描述:PHOTOCOUPLER 2CH TRAN OUT 8-DIP RoHS:否 類別:隔離器 >> 光隔離器 - 晶體管,光電輸出 系列:- 標準包裝:1,000 系列:- 通道數:2 輸入類型:DC 電壓 - 隔離:2500Vrms 電流傳輸比(最小值):7% @ 16mA 電流傳輸比(最大):50% @ 16mA 輸出電壓:20V 電流 - 輸出 / 通道:8mA 電流 - DC 正向(If):25mA Vce飽和(最大):- 輸出類型:有 Vcc 的晶體管 安裝類型:通孔 封裝/外殼:8-DIP(0.400",10.16mm) 包裝:管件 其它名稱:HCPL-2530W
PC-827 制造商:SHARP 制造商全稱:Sharp Electrionic Components 功能描述:High Density Mounting Type Photocoupler
PC8270MTPUQLDA 制造商:e2v technologies 功能描述:PC8270MTPUQLDA - Trays