參數資料
型號: P51XAG30
廠商: NXP Semiconductors N.V.
英文描述: XA 16-bit microcontroller family(XA16位微控制器系列)
中文描述: 的XA 16位微控制器系列(XA16位微控制器系列)
文件頁數: 12/36頁
文件大?。?/td> 208K
代理商: P51XAG30
Philips Semiconductors
Product specification
XA-G3
XA 16-bit microcontroller family
32K/512 OTP/ROM/ROMless, watchdog, 2 UARTs
1999 Apr 07
12
timer register is loaded with FFFF hex. The underflow also sets the
TF2 flag, which can generate an interrupt if enabled.
The external flag EXF2 toggles when Timer 2 underflows or
overflows. This EXF2 bit can be used as a 17th bit of resolution, if
needed. the EXF2 flag does not generate an interrupt in this mode.
As the baud rate generator, timer T2 is incremented by TCLK.
Baud Rate Generator Mode
By setting the TCLKn and/or RCLKn in T2CON or T2MOD, the
Timer 2 can be chosen as the baud rate generator for either or both
UARTs. The baud rates for transmit and receive can be
simultaneously different.
Programmable Clock-Out
A 50% duty cycle clock can be programmed to come out on P1.6.
This pin, besides being a regular I/O pin, has two alternate
functions. It can be programmed (1) to input the external clock for
Timer/Counter 2 or (2) to output a 50% duty cycle clock ranging from
3.58Hz to 3.75MHz at a 30MHz operating frequency.
To configure the Timer/Counter 2 as a clock generator, bit C/T2 (in
T2CON) must be cleared and bit T20E in T2MOD must be set. Bit
TR2 (T2CON.2) also must be set to start the timer.
The Clock-Out frequency depends on the oscillator frequency and
the reload value of Timer 2 capture registers (TCAP2H, TCAP2L) as
shown in this equation:
TCLK
TCAP2H,TCAP2L)
2
(65536
In the Clock-Out mode Timer 2 roll-overs will not generate an
interrupt. This is similar to when it is used as a baud-rate generator.
It is possible to use Timer 2 as a baud-rate generator and a clock
generator simultaneously. Note, however, that the baud-rate will be
1/8 of the Clock-Out frequency.
Table 1. Timer 2 Operating Modes
TR2
CP/RL2
RCLK+TCLK
DCEN
MODE
0
X
X
X
Timer off (stopped)
1
0
0
0
16-bit auto-reload, counting up
1
0
0
1
16-bit auto-reload, counting up or down depending on T2EX pin
1
1
0
X
16-bit capture
1
X
1
X
Baud rate generator
T0OE
LSB
MSB
BIT
TSTAT.2
SYMBOL
T1OE
FUNCTION
When 0, this bit allows the T1 pin to clock Timer 1 when in the counter mode.
When 1, T1 acts as an output and toggles at every Timer 1 overflow.
When 0, this bit allows the T0 pin to clock Timer 0 when in the counter mode.
When 1, T0 acts as an output and toggles at every Timer 0 overflow.
TSTAT.0
T0OE
SU00612B
T1OE
TSTAT Address:411
Bit Addressable
Reset Value: 00H
Figure 5. Timer 0 And 1 Extended Status (TSTAT)
DCEN
BIT
T2MOD.5 RCLK1
T2MOD.4 TCLK1
SYMBOL
FUNCTION
Receive Clock Flag.
Transmit Clock Flag. RCLK1 and TCLK1 are used to select Timer 2 overflow rate as a clock source
for UART1 instead of Timer T1.
When 0, this bit allows the T2 pin to clock Timer 2 when in the counter mode.
When 1, T2 acts as an output and toggles at every Timer 2 overflow.
Controls count direction for Timer 2 in autoreload mode.
DCEN=0 counter set to count up only
DCEN=1 counter set to count up or down, depending on T2EX (see text).
T2MOD.1 T2OE
T2MOD.0 DCEN
SU00610B
T2OE
TCLK1
RCLK1
T2MOD Address:419
Bit Addressable
Reset Value: 00H
LSB
MSB
Figure 6. Timer 2 Mode Control (T2MOD)
相關PDF資料
PDF描述
P51XAG33 XA 16-bit microcontroller family(XA16位微控制器系列)
P51XAG30KBA XA 16-bit microcontroller family 32K/512 OTP/ROM/ROMless, watchdog, 2 UARTs
P51XAG30KBBD XA 16-bit microcontroller family 32K/512 OTP/ROM/ROMless, watchdog, 2 UARTs
P51XAG30KFA XA 16-bit microcontroller family 32K/512 OTP/ROM/ROMless, watchdog, 2 UARTs
P51XAG30KFBD XA 16-bit microcontroller family 32K/512 OTP/ROM/ROMless, watchdog, 2 UARTs
相關代理商/技術參數
參數描述
P51XAG30GBA 制造商:未知廠家 制造商全稱:未知廠家 功能描述:16-Bit Microcontroller
P51XAG30GBBD 制造商:未知廠家 制造商全稱:未知廠家 功能描述:16-Bit Microcontroller
P51XAG30GFA 制造商:未知廠家 制造商全稱:未知廠家 功能描述:16-Bit Microcontroller
P51XAG30GFBD 制造商:未知廠家 制造商全稱:未知廠家 功能描述:16-Bit Microcontroller
P51XAG30JBA 制造商:未知廠家 制造商全稱:未知廠家 功能描述:16-Bit Microcontroller