NL27WZ125
http://onsemi.com
2
MAXIMUM RATINGS
Symbol
Parameter
Value
Units
VCC
DC Supply Voltage
0.5 to +7.0
V
VI
DC Input Voltage
0.5 to +7.0
V
VO
DC Output Voltage
Output in High Impedance State
Output in HIGH or LOW State
0.5 to +7.0
0.5 to VCC + 0.5
V
IIK
DC Input Diode Current, VI < GND
50
mA
IOK
DC Output Diode Current, VO < GND
50
mA
IO
DC Output Sink Current
±50
mA
ICC
DC Supply Current per Supply Pin
±100
mA
IGND
DC Ground Current per Ground Pin
±100
mA
TSTG
Storage Temperature Range
65 to +150
°C
TL
Lead Temperature, 1 mm from Case for 10 Seconds
260
°C
TJ
Junction Temperature under Bias
+150
°C
qJA
Thermal Resistance (Note
1)
250
°C/W
PD
Power Dissipation in Still Air at 85°C
250
mW
MSL
Moisture Sensitivity
Level 1
FR
Flammability Rating Oxygen Index: 28 to 34
UL 94 V0 @ 0.125 in
VESD
ESD Withstand Voltage
Human Body Model (Note
2)Charged Device Model (Note
4)> 2000
> 200
N/A
V
ILATCHUP
Latchup Performance Above VCC and Below GND at 125°C (Note 5) ±100
mA
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. Measured with minimum pad spacing on an FR4 board, using 10 mmby1 inch, 2ounce copper trace with no air flow.
2. Tested to EIA/JESD22A114A.
3. Tested to EIA/JESD22A115A.
4. Tested to JESD22C101A.
5. Tested to EIA/JESD78.
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
Min
Max
Units
VCC
Supply Voltage
Operating
Data Retention Only
1.65
1.5
5.5
V
VI
0
5.5
V
VO
Output Voltage (HIGH or LOW State)
0
5.5
V
TA
Operating FreeAir Temperature
55
+125
°C
Dt/DV
Input Transition Rise or Fall Rate
VCC = 2.5 V ±0.2 V
VCC = 3.0 V ±0.3 V
VCC = 5.0 V ±0.5 V
0
20
10
5
ns/V
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond
the Recommended Operating Ranges limits may affect device reliability.
6. Unused inputs may not be left open. All inputs must be tied to a high or lowlogic input voltage level.
DEVICE ORDERING INFORMATION
Device Order Number
Package Type
Shipping
NL27WZ125USG
US8
(PbFree)
3000 / Tape & Reel
NLV27WZ125USG*
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*NLV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AECQ100 Qualified and PPAP Capable.