NCN1188
http://onsemi.com
6
ELECTRICAL CHARACTERISTICS
Min and Max limits apply for TA from 40°C to +85°C (unless otherwise noted). Typical values are referenced to VCC = 3.6 V,
TA = +25°C (unless otherwise noted).
Symbol
Unit
Max
Typ
Min
Conditions
Parameter
SWITCHES TIMING CHARACTERISCTICS
tPD
Propagation Delay
0.25
ns
tON
Turn On Time
VIS = 1 V, RL = 50 W, CL = 7 pF
(fixture only)
2.2
ms
tOFF
Turn Off Time
VIS = 1 V, RL = 50 W, CL = 7 pF
(fixture only)
67
ns
tbb
BittoBit Skew
Within the same differential
channel
5
ps
tchch
ChanneltoChannel Skew
Maximum skew between all
channels
15
ps
6. Specification guarantee by design
7. No other delays than the RC network formed by the load resistance and the load capacitance of the switch are added on the bus. For a 10 pF
load, this delay is 5 ns which is much smaller than rise and fall time of typical driving systems. Propagation delays on the bus are determined
by the driving circuit on the driving side and its interactions with the load of the driven side.
TABLE OF GRAPHS
Symbol
Parameter
Figure
1080pEYE
MHL Video Eye Diagram at 3 Gbps (1080p)
720pEYE
1080iEYE
MHL Video Eye Diagram at 2.25 Gbps
(720p, 1080i)
USB2.0
USB 2.0 High Speed 480 Mbps Eye Diagram
USB1.1EYE
USB 1.1 Full Speed 12 Mbps Eye Diagram
USB1.0EYE
USB 1.0 Low Speed 1.5 Mbps Eye Diagram
ICC
Product Supply Current
vs. VCC
RON
Data Path On Resistance
vs. VIS
DIL
Data Switch Differential Insertion Loss
vs. Frequency
DISO
Data Switch Differential Off Isolation
vs. Frequency
DCTK
Data Switch Differential Crosstalk
vs. Frequency
RON
Audio Path On Resistance
vs. VIS
THDAUD
Audio THD
vs. Frequency