- 您現在的位置：買賣IC網 > PDF目錄39743 > MXR15KP17CTR (MICROSEMI CORP-SCOTTSDALE) 15000 W, BIDIRECTIONAL, SILICON, TVS DIODE PDF資料下載
參數資料
| 型號： | MXR15KP17CTR |
| 廠商： | MICROSEMI CORP-SCOTTSDALE |
| 元件分類： | TVS二極管 - 瞬態電壓抑制 |
| 英文描述： | 15000 W, BIDIRECTIONAL, SILICON, TVS DIODE |
| 封裝： | PLASTIC, CASE 5R, 2 PIN |
| 文件頁數： | 1/4頁 |
| 文件大小： | 230K |
| 代理商： | MXR15KP17CTR |
15,000 W TRANSIENT VOLTAGE
SUPPRESSOR
WWW
.Microse
m
i
.CO
M
S C O T TS DALE DIVISION
15KP17 thru 15KP280CA, e3
15KP17-15KP280CA,
e3
DESCRIPTION
APPEARANCE
These Microsemi 15 kW Transient Voltage Suppressors (TVSs) are
designed for applications requiring protection of voltage-sensitive electronic
devices that may be damaged by harsh or severe voltage transients
including lightning per IEC61000-4-5 and class levels with various source
impedances described herein. This series is available in 17 to 280 volt
standoff voltages (VWM) in both unidirectional and bi-directional offered in
two different package designs for axial and radial configurations.
Microsemi also offers numerous other TVS products to meet higher or
lower power demands and special applications.
CASE 5A
(DO-204AR)
CASE 5R
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
APPLICATIONS / BENEFITS
Available in both Unidirectional and Bidirectional
construction (Bidirectional with C or CA suffix)
Available in both axial-leaded and radial packages
(include R prefix in part number for radial package option
shown in figure as “case 5R,” e.g. R15KP17A)
Selections for 17 to 280 volt standoff voltages (VWM)
Suppresses transients up to 15 kW @ 10/1000 s and
100 kW @ 8/20 s (see Figure 1)
Optional 100% screening for avionics grade is available
by adding MA prefix to part number for added 100%
temperature cycle -55
oC to +125oC (10X) as well as surge
(3X) and 24 hours HTRB with post test VZ & IR (in the
operating direction for unidirectional or both directions for
bidirectional)
Options for screening in accordance with MIL-PRF-19500
for JAN, JANTX, JANTXV, and JANS are also available
by adding MQ, MX, MV, or MSP prefixes respectively to
part numbers.
Moisture classification is Level 1 with no dry pack required
per IPC/JEDEC J-STD-020B
RoHS Compliant devices available by adding “e3” suffix
Protection from switching transients and induced RF
Fast response
Protection from ESD, and EFT per IEC 61000-4-2 and
IEC 61000-4-4
Secondary lightning protection per IEC61000-4-5 with
42 Ohms source impedance:
Class 1,2,3,4: 15KP17A - 15KP280A or CA
Class 5: 15KP17A - 15KP280A or CA (short distance)
Class 5: 15KP17A - 15KP110A or CA (long distance)
Secondary lightning protection per IEC61000-4-5 with
12 Ohms source impedance:
Class 1 & 2: 15KP17A to 15KP280A or CA
Class 3: 15KP17A to 15KP240A or CA
Class 4: 15KP17A to 15KP120A or CA
Secondary lightning protection per IEC61000-4-5 with
2 Ohms source impedance:
Class 2: 15KP17A to 15KP220A or CA
Class 3: 15KP17A to 15KP110A or CA
Class 4: 15KP17A to 15KP54A or CA
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
Peak Pulse Power dissipation at 25C: 15,000 watts at
10/1000 μs (also see Figures 1 and 2)
Impulse repetition rate (duty factor): 0.05%
tclamping (0 volts to V(BR) min.): < 100 ps theoretical for
unidirectional and < 5 ns for bidirectional
Operating and Storage temperature: -65C to +150C
Thermal resistance: 20C/W junction to lead, or 80C/W
junction to ambient when mounted on FR4 PC board with
4 mm
2 copper pads (1oz) and track width 1 mm, length
25 mm
Steady-State Power dissipation: 6 watts at TL = 30oC, or
1.56 watts at TA = 25
C when mounted on FR4 PC board
described for thermal resistance
Forward Surge: 200 Amps 8.3 ms half-sine wave for
unidirectional devices only
Solder temperatures: 260 C for 10 s (maximum)
CASE: Void-free transfer molded thermosetting
epoxy body meeting UL94V-0
FINISH: Tin-Lead or RoHS compliant annealed
matte-Tin plating readily solderable per MIL-STD-
750, method 2026
MARKING: Body marked with part number
POLARITY: Band denotes cathode for the axial-
leaded package and a dot denotes cathode terminal
for the radial package. Bidirectional not marked for
polarity
WEIGHT: 1.5 grams (approximate)
TAPE & REEL option: Standard per EIA-296 for
axial package (add “TR” suffix to part number)
See package dimension on last page
Microsemi
Scottsdale Division
Page 1
Copyright
2006
3-10-2006 REV F
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
發布緊急采購，3分鐘左右您將得到回復。