Document DS 12633 Rev C, ECN 9765
Revision Date: 4/20/2011
Surface Mount PIN Diode
SP2T Switches
MSW2000-200, MSW2001-200 &
MSW2002-200 Series Datasheet
Description
The MSW2000-200, MSW2001-200, and MSW2002-200 Series of Surface Mount Silicon PIN Diode SP2T
T-R Switches is manufactured using Aeroflex / Metelics proven hybrid manufacturing process
incorporating High Voltage PIN Diodes and passive devices integrated within a ceramic substrate. This
low profile, compact, surface mount component, (8mm L x 5mm W x 2.5 mm H) offers superior low and
high signal performance to comparable MMIC devices in QFN packages. The SP2T switches are designed
in an asymmetrical topology to optimize Tx-Ant Loss and Tx-Rx Isolation performance.
Using PIN Diodes with lower thermal resistance (< 10 C/W ), RF C.W. incident power levels of +50 dBm
and RF peak incident power levels of +57 dBm are very achievable in higher power cold and hot
switching applications @ +85 C. The lower PIN Diode series resistance ( < 0.8
Ω ), coupled with the
longer minority carrier lifetime, ( > 2 μS ), provides better IIP3 distortion values > +65 dBm.
Applications
The MSW2000-200, MSW2001-200, and MSW2002-200 Series SP2T Switches are designed to be used
in higher average and peak power switch applications, operating from 20 MHz to 6000 MHz, requiring
high volume, surface mount, solder re-flow manufacturing. These products are durable, reliable, and
capable of meeting all military, commercial, and industrial environments. The devices are fully RoHS
compliant.
Environmental Capabilities
The MSW2000-200, MSW2001-200, and MSW2002-200 Series SP2T Switches are capable of meeting
the environmental requirements of MIL-STD-202 and MIL-STD-750.
ESD and Moisture Sensitivity Level Rating
PIN Diode Switches are susceptible to ESD conditions as with all semiconductors. The ESD rating for this
device is Class 1C, HBM. The moisture sensitivity level rating for this device is MSL 2
Features
Surface Mount SP2T Switch in Compact Outline:
8mm L x 5mm W x 2.5 mm H
Higher Average Power Handling than Plastic (125 W C.W.)
Higher Voltage > 500 Volts for Higher RF Peak Power (500 W)
Lower Insertion Loss ( 0.25 dB ) & Higher IIP3 (65 dBm)
Operates From + Voltage Only (+5V, & +28V to +125V)
RoHS Compliant