參數資料
型號： mPD789326
廠商： NEC Corp.
元件分類： 8位微控制器
英文描述： 8-bit Microcontroller with 2/4/8K Bytes In-System Programmable Flash
中文描述： 8位微控制器與2/4/8K字節在系統可編程閃存
文件頁數： 53/96頁
文件大小： 482K
代理商： MPD789326
Preliminary Product Information U14673EJ1V0PM00
53
μ
PD789322,789324,789326,789327
5.7.3 LCD controller/driver control registers
The LCD controller/driver is controlled by the following three registers.
LCD display mode register 0 (LCDM0)
LCD clock control register 0 (LCDC0)
Port function register 8 (PF8)
(1) LCD display mode register 0 (LCDM0)
This register is used to enable/disable operation, and set the operation mode and the supply of power for LCD drive.
LCDM0 is set using a 1-bit or 8-bit memory manipulation instruction.
RESET input sets this register to 00H.
Figure 5-26. Format of LCD Display Mode Register 0
Symbol
<7>
<6>
5
<4>
3
2
1
0
Address
After reset
R/W
LCDM0 LCDON0
VAON0
0
LIPS0
0
0
0
0
FFB0H
00H
R/W
LCDON0
LCD display enable/disable
0
Display off (all segment outputs are unselected for signal output)
1
Display on
VAON0
LCD controller/driver operation mode
Note
0
No internal booster (for 2.7- to 5.5-V display)
1
Internal booster enabled (for 1.8- to 5.5-V display)
LIPS0
Supply of power for LCD drive
Note
0
Power not supplied for LCD drive
1
Power supplied for LCD drive
Note
To reduce power consumption when the LCD display is not being used, set VAON0 and LIPS0 to 0.
Cautions 1. Always set bits 0 to 3 and 5 to 0.
2. When manipulating VAON0, observe following procedure.
A. When internal booster is stopped after changing to the display off condition from the
display on condition
1) Set the display off condition by setting LCDON0 = 0.
2) Set all segment buffers and common buffers to output disabled by setting LIPS0 = 0.
3) Stop the booster by setting VAON0 = 0.
B. When the booster is stopped in the display on condition
This is prohibited. Be sure to stop the booster after changing to the display off
condition.
C. When the display is turned on from the booster-stoped condition
1) Wait about 500 ms after starting the booster by setting VAON0 = 1.
2) Set all segment buffers and common buffers to signal output unselected by setting
LIPS0 = 1.
3) Set the display on condition by setting LCDON0 = 1.
相關PDF資料
PDF描述
MPL135 Big current (55A), Footprint compatible with most standard, Lower temperature rise at big current, Low DCR, Without noise
MPL135-0R4 Big current (55A), Footprint compatible with most standard, Lower temperature rise at big current, Low DCR, Without noise
MPL135-1R0 Big current (55A), Footprint compatible with most standard, Lower temperature rise at big current, Low DCR, Without noise
MPL135-1R5 Big current (55A), Footprint compatible with most standard, Lower temperature rise at big current, Low DCR, Without noise
MPL135-R22 Big current (55A), Footprint compatible with most standard, Lower temperature rise at big current, Low DCR, Without noise
相關代理商/技術參數
參數描述
MPD789326GB-XXX-8ET 制造商:NEC 制造商全稱:NEC 功能描述:8-BIT SINGLE-CHIP MICROCONTROLLER
MPD789327 制造商:NEC 制造商全稱:NEC 功能描述:8-Bit Single-Chip Microcontrollers
MPD789327GB-XXX-8ET 制造商:NEC 制造商全稱:NEC 功能描述:8-BIT SINGLE-CHIP MICROCONTROLLER
MPD789425 制造商:NEC 制造商全稱:NEC 功能描述:8-Bit Single-Chip Microcontrollers
MPD789426 制造商:NEC 制造商全稱:NEC 功能描述:8-Bit Single-Chip Microcontrollers
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*