參數(shù)資料
型號: MPC5607BMMG6R
廠商: FREESCALE SEMICONDUCTOR INC
元件分類: 微控制器/微處理器
英文描述: FLASH, 64 MHz, MICROCONTROLLER, PBGA208
封裝: 17 X 17 MM, 1 MM PITCH, MO-151 AAF-1, BGA-208
文件頁數(shù): 36/106頁
文件大?。?/td> 667K
代理商: MPC5607BMMG6R
Electrical characteristics
MPC5607B Microcontroller Data Sheet, Rev. 5
Freescale Semiconductor
35
VDD_BV
4
SR Voltage on VDD_BV pin (regulator supply) with
respect to ground (VSS)
—4.5
5.5
V
Voltage drop2
3.0
5.5
Relative to VDD
3.0
VDD +0.1
VSS_ADC SR Voltage on VSS_HV_ADC0, VSS_HV_ADC1 (ADC
reference) pin with respect to ground (VSS)
—VSS 0.1 VSS +0.1
V
VDD_ADC
5
SR Voltage on VSS_HV_ADC0, VSS_HV_ADC1 (ADC
reference) with respect to ground (VSS)
—4.5
5.5
V
Voltage drop2
3.0
5.5
Relative to VDD
VDD 0.1 VDD +0.1
VIN
SR Voltage on any GPIO pin with respect to ground
(VSS)
—VSS 0.1
V
Relative to VDD
—VDD +0.1
IINJPAD
SR Injected input current on any pin during overload
condition
55
mA
IINJSUM
SR Absolute sum of all injected input currents during
overload condition
50
TVDD
SR VDD slope to ensure correct power up
6
0.25
V/s
TA C-Grade
Part
SR Ambient temperature under bias
fCPU < 64 MHz
7
40
85
°C
TJ C-Grade
Part
SR Junction temperature under bias
40
110
TA V-Grade
Part
SR Ambient temperature under bias
fCPU < 64 MHz
40
105
TJ V-Grade
Part
SR Junction temperature under bias
40
130
TA M-Grade
Part
SR Ambient temperature under bias
fCPU < 64 MHz
40
125
TJ M-Grade
Part
SR Junction temperature under bias
40
150
1 100 nF capacitance needs to be provided between each V
DD/VSS pair.
2 Full device operation is guaranteed by design when the voltage drops below 4.5V down to 3.6V. However, certain
analog electrical characteristics will not be guaranteed to stay within the stated limits.
3 330 nF capacitance needs to be provided between each V
DD_LV/VSS_LV supply pair.
4 470 nF capacitance needs to be provided between V
DD_BV and the nearest VSS_LV (higher value may be needed
depending on external regulator characteristics). While the supply voltage ramps up, the slope on VDD_BV should
be less than 0.9VDD_HV in order to ensure the device does not enter regulator bypass mode.
5 100 nF capacitance needs to be provided between V
DD_ADC/VSS_ADC pair.
6 Guaranteed by device validation. Please refer to Section 4.5.1, “External ballast resistor recommendations for
minimum VDD slope to be guaranteed to ensure correct power up in case of external resistor usage.
7 This frequency includes the 4% frequency modulation guardband.
Table 9. Recommended operating conditions (5.0 V) (continued)
Symbol
Parameter
Conditions
Value
Unit
Min
Max
相關PDF資料
PDF描述
MPC5607BMLU4 FLASH, 48 MHz, MICROCONTROLLER, PQFP176
MPC5607BVLU4R FLASH, 48 MHz, MICROCONTROLLER, PQFP176
MPC5607BCLL4 FLASH, 48 MHz, MICROCONTROLLER, PQFP100
MPC5607BCLL6 FLASH, 64 MHz, MICROCONTROLLER, PQFP100
MPC5607BMMG6 FLASH, 64 MHz, MICROCONTROLLER, PBGA208
相關代理商/技術參數(shù)
參數(shù)描述
MPC5607CECLLR 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:Microcontroller
MPC5607CECLQR 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:Microcontroller
MPC5607CECLUR 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:Microcontroller
MPC5607CEMLLR 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:Microcontroller
MPC5607CEMLQR 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:Microcontroller