參數資料
型號: MPC5606SCLQ6R
廠商: FREESCALE SEMICONDUCTOR INC
元件分類: 微控制器/微處理器
英文描述: 32-BIT, FLASH, 64 MHz, MICROCONTROLLER, PQFP144
封裝: 20 X 20 MM, 1.40 MM HEIGHT, 0.50 MM PITCH, ROHS COMPLIANT, LQFP-144
文件頁數: 47/136頁
文件大小: 858K
代理商: MPC5606SCLQ6R
MPC5606S Microcontroller Data Sheet, Rev. 7
Freescale Semiconductor
18
Interrupt driven operation with 16 interrupt sources
LIN slave mode features
— Autonomous LIN header handling
— Autonomous LIN response handling
— Discarding of irrelevant LIN responses using up to 16 ID filters
UART mode
— Full-duplex operation
— Standard non return-to-zero (NRZ) mark/space format
— Data buffers with 4-byte receive, 4-byte transmit
— Configurable word length (8-bit or 9-bit words)
— Error detection and flagging
Parity, noise and framing errors
— Interrupt driven operation with 4 interrupts sources
— Separate transmitter and receiver CPU interrupt sources
— 16-bit programmable baud-rate modulus counter and 16-bit fractional
— 2 receiver wake-up methods
1.6.19
System clocks and clock generation modules
The system clock on the MPC5606S can be derived from an external oscillator, an on-chip FMPLL, or the internal 16 MHz
oscillator.
The source system clock frequency can be changed via an on-chip programmable clock divider (
1 to 2).
Additional programmable peripheral bus clock divider ratio (
1 to 16)
The MPC5606S has 2 on-chip FMPLLs—the primary module and an auxiliary module.
— Each features the following:
Input clock frequency from 4 MHz to 16 MHz
Lock detect circuitry continuously monitors lock status
Loss Of Clock (LOC) detection for reference and feedback clocks
On-chip loop filter (for improved electromagnetic interference performance and reduction of number of
external components required)
Support for frequency ramping from PLL
— The primary FMPLL module is for use as a system clock source. The auxiliary FMPLL is available for use as an
alternate, modulated or non-modulated clock source to eMIOS modules and as alternate clock to the DCU for
pixel clock generation.
The main oscillator provides the following features:
— Input frequency range 4–16 MHz
— Square-wave input mode
— Oscillator input mode 3.3 V (5.0 V)
— Automatic level control
— PLL reference
MPC5606S includes a 32 KHz low power external oscillator for slow execution, low power, and Real Time Clock
Dedicated internal 128 kHz RC oscillator for low power mode operation and self wake-up
— ±10% accuracy across voltage and temperature (after factory trimming)
— Trimming registers to support improved accuracy with in-application calibration
Dedicated 16 MHz internal RC oscillator
— Used as default clock source out of reset
相關PDF資料
PDF描述
MPC5607BCLQ6R FLASH, 64 MHz, MICROCONTROLLER, PQFP144
MPC5607BVLL4R FLASH, 48 MHz, MICROCONTROLLER, PQFP100
MPC5607BCMG4 FLASH, 48 MHz, MICROCONTROLLER, PBGA208
MPC5607BCLL6R FLASH, 64 MHz, MICROCONTROLLER, PQFP100
MPC5607BMLU6R FLASH, 64 MHz, MICROCONTROLLER, PQFP176
相關代理商/技術參數
參數描述
MPC5606S-DEMO-V2 功能描述:開發(fā)板和工具包 - 其他處理器 EVB MPC5606S RoHS:否 制造商:Freescale Semiconductor 產品:Development Systems 工具用于評估:P3041 核心:e500mc 接口類型:I2C, SPI, USB 工作電源電壓:
MPC5607B 制造商:Freescale Semiconductor 功能描述:
MPC5607B_13 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:MicrocontrollerData Sheet
MPC5607BECLLR 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:Microcontroller
MPC5607BECLQR 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:Microcontroller