MITSUMI
Low Voltage Operating 75
Driver MM1671~MM1677 Series
Low Voltage Operating 75
Driver
Monolithic IC MM1671~MM1677 Series
Outline
This IC is a 75
driver with a built-in LPF that can operate at low voltage. Operationg supply voltage supports
3V and 5V systems, and it is ideal for video signal output in devices ranging from portable equipment such as
digital still cameras to stationary equipment such as DVD players. It incorporates a high-performance 4th-
order LPF, which is ideal for removing DAC sampling noise. In addition, ultra-low current consumption has
been achieved by suppressing current consumption in power-save mode to under 1μA. This lengthens battery
life in portable devices.
The built-in amp gain on these series ICs is available: 6dB/9dB/12dB/16.5dB, thus enabling support for DAC
and a variety of output amplitudes. The series offers a choise of either with or without input clamp, allowing
support for a range of video signals, other than composite signals.
Features
1. Operating supply voltage
2. Operating ambient temperature
3. Current consumption (no signal)
4. Current consumption in power-save mode
5. High-precision voltage gain
6. Includes a high-performance 4th-order LPF
2.8~5.5V (supports 3V and 5V systems)
-
40~85°C
7.0mA typ.
1.0μA max.
6±0.3dB at 100kHz (MM1671)
6.75MHz/100kHz max. ±1.0dB
27MHz/100kHz typ.
-
40dB
7. Incorporates a sag auxiliary circuit
8. Built-in amp output gain available in these series models (6dB/9dB/12dB/16.5dB)
9. The series offers a choise of either with or without input clamp.
10. Mounted in a ultra-small package
Package
SOT-26A
July 8, 2003
Model Name
MM1671
MM1672
MM1673
MM1674
MM1675
MM1676
MM1677
Clamp
Built-in amplifier
SAG measures pin
6dB
9dB
12dB
6dB
9dB
12dB
16.5dB
Power supply voltage
2.8~5.5V
2.8~5.5V
2.8~5.5V
2.8~5.5V
2.8~5.5V
2.8~5.5V
2.8~5.5V
Line-up