![](http://datasheet.mmic.net.cn/Microchip-Technology/MCP2210T-I-MQ_datasheet_98949/MCP2210T-I-MQ_62.png)
MCP2210
DS22288A-page 62
2011 Microchip Technology Inc.
4.0
ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings ()
Ambient temperature under bias ......................................................................................................... -40°C to +85°C
Storage temperature ........................................................................................................................ -65°C to +150°C
Voltage on VDD with respect to VSS ................................................................................................... -0.3V to +6.0V
Voltage on MCLR with respect to Vss ................................................................................................. -0.3V to +9.0V
Voltage on VUSB pin with respect to VSS ............................................................................................ -0.3V to +4.0V
Voltage on D+ and D- pins with respect to VSS ...................................................................... -0.3V to (VUSB + 0.3V)
Voltage on all other pins with respect to VSS ............................................................................ -0.3V to (VDD + 0.3V)
Total power dissipation(1) ...............................................................................................................................800 mW Maximum current out of VSS pin ...................................................................................................................... 95 mA
Maximum current into VDD pin ......................................................................................................................... 95mA
Clamp current, IK (VPIN < 0 or VPIN > VDD)
20 mA
Maximum output current sunk by any I/O pin....................................................................................................25 mA
Maximum output current sourced by any I/O pin...............................................................................................25 mA
Maximum current sunk by all ports....................................................................................................................90 mA
Maximum current sourced by all ports ............................................................................................................. 90 mA
Note 1:
Power dissipation is calculated as follows: PDIS = VDD x {IDD –
IOH} + {(VDD – VOH) x IOH} + (VOl x IOL).
2:
VUSB must always be
VDD + 0.3V
NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional operation of the device at those or any other conditions above those
indicated in the operation listings of this specification is not implied. Exposure above maximum rating conditions for
extended periods may affect device reliability.