
MOTOROLA LONWORKS TECHNOLOGY
MC143120E2
2–6
Neuron Chip Distributed
Communications and Control
Processor
The MC143120E2 contains the LonTalk protocol in 10K ROM. It differs from
the MC143120B1 in that it contains 21 I/O models. Bit Shift, Serial Input, and
Serial Output I/O models are not in the ROM rmware, but can be loaded into
EEPROM by the LonBuilder tool if needed. In addition, 21 I/O models are
integrated with ROM to provide simplied sense and control device interfacing.
Three 8-Bit Pipelined Processors for Concurrent Processing of Application
Code and Network Packets
11-Pin I/O Port Programmable in 21 Models for Fast Application Program
Development
Two 16-Bit Timer/Counters for Measuring and Generating I/O Device
Waveforms
5-Pin Communications Port that Supports Direct Connect and Network
Transceiver Interfaces
2048 Bytes of Static RAM for Buffering Network Data and Storing Network
Variables
2048 Bytes of EEPROM for Flexible Storage of Address and Binding Data
Programmable Pull-Ups on IO4 – IO7 and 20 mA Sink Current on IO0 – IO3
Unique 48-Bit ID Number in Every Device to Facilitate Network Installation
and Management — ID Number Stored Redundantly for Guaranteed 20-Year
Data Retention
32-Pin SOG or 44-Pin PQFP Package
Low Operating Current: 16 mA (Typical) at 10 MHz Frequency
1.8 mA (Typical) at 625 kHz Frequency
Sleep Mode Operation Reduced Current Consumption (9
A Typical)
Maximum Clock Operation of 10 MHz, Over a – 40 to + 85
°C Temperature
Range
Either LonBuilder Release 3.x or NodeBuilder Software is Required for
Programming
On-Chip LVI Circuit Enabled Reset Below 4.1 V
± 300 mV Range
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
MC143120E2
FB SUFFIX
PQFP PACKAGE
CASE 824E-02
DW SUFFIX
SOG PACKAGE
CASE 1116-0
ORDERING INFORMATION
MC143120E2DW
SOG Package
MC143120E2FB
PQFP Package
REV 6
8/98