參數資料
型號： MB90F952MBPF
廠商： FUJITSU LTD
元件分類： 微控制器/微處理器
英文描述： 16-BIT, FLASH, 32 MHz, MICROCONTROLLER, PQFP100
封裝： 14 X 20 MM, 3.35 MM HEIGHT, 0.65 MM PITCH, PLASTIC, QFP-100
文件頁數： 15/84頁
文件大小： 2562K
代理商： MB90F952MBPF
MB90950 Series
22
DS07-13752-1E
Sequence for Turning On the Power Supply to the A/D Converter and Analog Inputs
Make sure to turn on the A/D converter power supply (AVCC, AVRH, AVRL) and analog inputs (AN0 to AN23)
after turning-on the digital power supply (VCC).
Turn-off the digital power after turning off the A/D converter supply and analog inputs. In this case, make sure
that the voltage does not exceed AVRH or AVCC (turning on/off the analog and digital power supplies simulta-
neously is acceptable).
Pin connection when A/D converter is not used
Connect unused pins of A/D converter to AVCC
= VCC, AVSS = AVRH = AVRL = VSS.
Crystal Oscillator Circuit
The X0, X1 pins and X0A, X1A pins may be possible causes of abnormal operation. Make sure to provide bypass
capacitors via the shortest distance from X0, X1 pins and X0A, X1A pins, crystal oscillator (or ceramic oscillator)
and ground lines, and make sure, to the utmost effort, that the oscillation circuit lines do not cross the lines of
other circuits. It is highly recommended to provide a printed circuit board art work surrounding X0, X1 pins and
X0A, X1A pins with a ground area for stabilizing the operation.
For each of the mass-production products, request an oscillator evaluation from the manufacturer of the oscillator
you are using.
Pull-up/down resistors
The MB90950 Series does not support internal pull-up/down resistors (except for the pull-up resistors built into
ports 0 to 3). Use external components where needed.
Using external clock
To use an external clock, drive the X0 pin and leave the X1 pin open.
Precautions when not using a sub clock signal
If you do not connect pins X0A and X1A to an oscillator, use pull-down handling on the X0A pin, and leave the
X1A pin open.
Notes on operation in PLL clock mode
If PLL clock mode is selected, the microcontroller attempt to be working with the self-oscillating circuit even when
there is no external oscillator or the external clock input is stopped. Performance of this operation, however,
cannot be guaranteed.
Notes on Power-On
To prevent the internal regulator circuit from malfunctioning, set the voltage rise time during power-on to 50
s
or more (0.2 V to 2.7 V) .
X0
X1
MB90950 Series
Open
相關PDF資料
PDF描述
MB90F952MBSPF 16-BIT, FLASH, 32 MHz, MICROCONTROLLER, PQFP100
MB90F952MDPF 16-BIT, FLASH, 32 MHz, MICROCONTROLLER, PQFP100
MB90F952JDPF 16-BIT, FLASH, 32 MHz, MICROCONTROLLER, PQFP100
MB90P553APF 16-BIT, OTPROM, 16 MHz, MICROCONTROLLER, PQFP100
MB90W224AZF 16-BIT, UVPROM, 16 MHz, MICROCONTROLLER, CQFP120
相關代理商/技術參數
參數描述
MB90F962SPMCR-GE1 制造商:FUJITSU 功能描述:IC MCU 16BIT 16LX 48LQFP
MB90F962SPMCR-G-JNE1 制造商:FUJITSU 功能描述:
MB90V340A-102CR 制造商:FUJITSU 功能描述:
MB-910 制造商:Circuit Test 功能描述:BREADBOARD WIRING KIT - 350 PCS
MB9100100 制造商:COM/DUO 功能描述:FAN 4-6WKS
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*