參數資料
型號： MB90F362TPMT
元件分類： 微控制器/微處理器
英文描述： 16-BIT, FLASH, 24 MHz, MICROCONTROLLER, PQFP48
封裝： PLASTIC, LQFP-48
文件頁數： 7/59頁
文件大?。?/td> 623K
代理商： MB90F362TPMT
MB90360 Series
15
10. Connection of unused pins of A/D converter if A/D converter is used
Connect unused pins of A/D converter to AVCC
= VCC, AVSS = AVR = VSS.
11. Notes on energization
To prevent the internal regulator circuit from malfunctioning, set the voltage rise time during energization at
50
s or more (0.2 V to 2.7 V)
12. Stabilization of power supply voltage
A sudden change in the power supply voltage may cause the device to malfunction even within the specified
VCC power supply voltage operating guarantee range. Therefore, the VCC power supply voltage should be stabi-
lized.
For reference, the power supply voltage should be controlled so that VCC ripple variations (peak-to-peak value)
at commercial frequencies (50 Hz to 60 Hz) fall below 10
% of the standard VCC power supply voltage and the
coefficient of transient fluctuation does not exceed 0.1 V/ms at instantaneous power switching.
13. Initialization
In the device, there are internal registers which are initialized only by a power-on reset. To initialize these registers,
turn on the power again.
14. Notes on using CAN function
To use CAN function, please set ’1’ to DIRECT bit of CAN direct mode register (CDMR) .
If DIRECT bit is set to ’0’ (initial value) , wait states will be performed when accessing CAN registers.
Note : Please refer to Hardware Manual of MB90360 series for detail of CAN Direct Mode Register.
15. Flash security function
The security bit is located in the area of the flash memory.
If protection code 01H is written in the security bit, the flash memory is in the protected state by security.
Therefore, please do not write 01H in this address if you do not use the security function.
Please refer to following table for the address of the security bit.
16. Correspondence with
+105 °C or more
If used exceeding TA
= +105 °C, please contact Fujitsu for reliability limitations.
Flash memory size
Address for security bit
MB90F362
MB90F362S
MB90F362T
MB90F362TS
MB90F367
MB90F367S
MB90F367T
MB90F367TS
Embedded 512 Kbit Flash Memory
FF0001H
相關PDF資料
PDF描述
MB90362PMT 16-BIT, MROM, 24 MHz, MICROCONTROLLER, PQFP48
MB90362TSPMT 16-BIT, MROM, 24 MHz, MICROCONTROLLER, PQFP48
MB90F362SPMT 16-BIT, FLASH, 24 MHz, MICROCONTROLLER, PQFP48
MB90F395HPMT 16-BIT, FLASH, 24 MHz, MICROCONTROLLER, PQFP120
MB90F428GAPFV 16-BIT, FLASH, 16 MHz, MICROCONTROLLER, PQFP100
相關代理商/技術參數
參數描述
MB90F367TPMCR-GE1 制造商:FUJITSU 功能描述:
MB90F367TPMCR-G-JNE1 制造商:FUJITSU 功能描述:
MB90F367TPMCR-GSE1 制造商:FUJITSU 功能描述:
MB90F367TSPMCR-GE1 制造商:FUJITSU 功能描述:
MB90F367TSPMCR-GSE1 制造商:FUJITSU 功能描述:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*