• <thead id="bh6yg"></thead>
  • <tbody id="bh6yg"><sup id="bh6yg"></sup></tbody>
  • <thead id="bh6yg"><ul id="bh6yg"></ul></thead>
    <nobr id="bh6yg"><menu id="bh6yg"></menu></nobr>
    參數資料
    型號: MB90641APF
    元件分類: 微控制器/微處理器
    英文描述: 16-BIT, MROM, 17 MHz, MICROCONTROLLER, PQFP100
    封裝: PLASTIC, QFP-100
    文件頁數: 20/94頁
    文件大?。?/td> 1542K
    代理商: MB90641APF
    27
    MB90640A Series
    s PERIPHERAL RESOURCES
    1. Parallel Port
    The MB90640A series has 75 I/O pins, and 8 open-drain output pins.
    Ports 0 to 5 and ports 7 to 9 and A are I/O ports. The ports are inputs when the corresponding direction register
    bit is “0” and outputs when the corresponding bit is “1”.
    Port 0 is only available in single-chip mode.
    Port 1 is only available when in data bus 8-bit mode of non-multiplex mode or in single-chip mode.
    Ports 2 and 3 are only available when the address/data bus is in multiplex mode and single-chip mode.
    Port 6 is an open-drain port.
    (1) Register Details
    Port data registers
    Note: No register bit is provided for bits 0, 7 of port 7.
    No register bit is provided for bit 7 of port 8.
    No register bits are provided for bits 7, 6 of port 9.
    Port 0 is only available in single-chip mode.
    Bits 7, 6 of port 5 and bit 0 of port A are only available in single-chip mode.
    Port 1 is only available when the external data bus is in 8-bit mode and single-chip mode.
    Ports 2, 3 are only available in multiplex mode and single-chip mode.
    Each port pin except port 6 can be specified as either an input or output by its corresponding direction register
    when the pin is not set for use by a peripheral. When a port is set as an input, reading the data register always
    reads the value corresponding to the pin level. When a port is set as an output, reading the data register reads the
    data register latch value. The same applies when reading using a read-modify-write instruction.
    When used as control outputs, reading the data register reads the control output value, irrespective of the direction
    register value.
    Address : PDR1
    PDR3
    PDR5
    PDR7
    PDR9
    PDR0
    PDR2
    PDR4
    PDR6
    PDR8
    PDRA
    PDx7
    PDx6
    PDx5
    PDx4
    PDx3
    PDx2
    PDx1
    PDx0
    bit 15
    bit 14
    bit 13
    bit 12
    bit 11
    bit 10
    bit 9
    bit 8
    R/W
    Initial value
    : 000001H
    : 000003H
    : 000005H
    : 000007H
    : 000009H
    : 000000H
    : 000002H
    : 000004H
    : 000006H
    : 000008H
    : 00000AH
    XXXXXXXXB
    Address :
    PDx7
    PDx6
    PDx5
    PDx4
    PDx3
    PDx2
    PDx1
    PDx0
    bit 7
    bit 6
    bit 5
    bit 4
    bit 3
    bit 2
    bit 1
    bit 0
    R/W
    Initial value
    XXXXXXXXB
    R/W
    X
    : Readable and writable
    : Indeterminate
    Port data register
    相關PDF資料
    PDF描述
    MB90P641APF 16-BIT, OTPROM, 17 MHz, MICROCONTROLLER, PQFP100
    MB90V595GCR 16-BIT, 16 MHz, MICROCONTROLLER, CPGA256
    MB90V595CR 16-BIT, 16 MHz, MICROCONTROLLER, CPGA256
    MB91151APMC-G RISC MICROCONTROLLER, PQFP144
    MB91233LPFF-G-XXX 32-BIT, MROM, 33.6 MHz, RISC MICROCONTROLLER, PQFP120
    相關代理商/技術參數
    參數描述
    MB90641APFV 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:16-bit Proprietary Microcontroller
    MB90652A 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:16-bit Proprietary Microcontroller
    MB90652APF 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:16-bit Proprietary Microcontroller
    MB90652APFV 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:16-bit Proprietary Microcontroller
    MB90653A 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:16-bit Proprietary Microcontroller