- 您現在的位置：買賣IC網 > PDF目錄8625 > MAX3645EEE+ (Maxim Integrated Products)IC AMP LIMITING 16-QSOP PDF資料下載
參數資料
| 型號： | MAX3645EEE+ |
| 廠商： | Maxim Integrated Products |
| 文件頁數： | 7/10頁 |
| 文件大?。?/td> | 0K |
| 描述： | IC AMP LIMITING 16-QSOP |
| 產品培訓模塊： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 標準包裝： | 100 |
| 類型： | 限幅放大器 |
| 應用： | 數據量化器，光學接收器 |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 16-SSOP（0.154"，3.90mm 寬） |
| 供應商設備封裝： | 16-QSOP |
| 包裝： | 管件 |
| 產品目錄頁面： | 1387 (CN2011-ZH PDF) |
MAX3645
Detailed Description
The MAX3645 consists of gain stages, offset correction,
power detector, LOS indicators, and PECL output buffers.
See Figure 2 for the functional diagram.
Data Input
The data inputs have a single-ended input resistance of
4.8k
and are internally DC-biased to VCC - 0.87V (see
Figure 3). External capacitors are required to AC-cou-
ple the data signals. Pattern-dependent jitter is mini-
mized by using coupling capacitor values large enough
to pass the lowest frequencies of interest (consecutive
ones and zeros) with the given input resistance.
Typically, 0.1F coupling capacitors yield a -3dB fre-
quency of 354Hz. Capacitor tolerance and input resis-
tance variation (3.3k
to 6.4k) must be considered to
accurately calculate the -3dB frequency. Capacitor val-
ues should be chosen that set the -3dB frequency at
least a factor of 10 below the lowest frequency of inter-
est. A capacitor value of 0.1F is recommended.
Gain Stage and Offset Correction
The limiting amplifier provides approximately 74dB
(RTH = 100
) of gain. This large gain makes the ampli-
fier susceptible to small DC offsets in the signal path.
To correct DC offsets, the amplifier has an internal feed-
back loop that acts as a DC autozero circuit. By cor-
recting the DC offsets, the limiting amplifier improves
receiver sensitivity and power-detector accuracy.
+2.97V to +5.5V, 125Mbps to 200Mbps Limiting
Amplifier with Loss-of-Signal Detector
6
_______________________________________________________________________________________
PIN
MINDSPEED
MC2045-2
MC2045-2Y
PIN NAME
MAXIM
MAX3645
PIN NAME
FUNCTION
1
CAZ-
CAZ2
Offset-Correction-Loop Capacitor Connection. A capacitor connected between this pin and
CAZ1 sets the time constant of the offset correction loop. The offset correction is disabled
when the CAZ1 and CAZ2 pins are shorted together.
2
CAZ+
CAZ1
Offset-Correction-Loop Capacitor Connection. A capacitor connected between this pin and
CAZ2 sets the time constant of the offset correction loop. The offset correction is disabled
when the CAZ2 and CAZ1 pins are shorted together.
3
GNDA
Analog Supply Ground. Must be at the same potential as the GNDE pin.
4DIN
DIN+
Positive Data Input
5DIN
DIN-
Negative Data Input
6VCCA
VCCA
+2.97V to +5.5V Analog Supply Voltage. Must be at same potential as the VCCE pin.
7CF
CSD
Signal-Detect-Filter Capacitor Connection. Connect the CSD capacitor between CSD and VCCA.
8
JAM
DIS
Disable Input, PECL or CMOS Compatible. Data outputs are held to a static logic 0 when DIS is
asserted high. The LOS function remains active when the outputs are disabled. When
connected to the LOS pin, an automatic squelch function is enabled.
9
ST
LOS
Positive Loss-of-Signal Output, PECL. LOS is high when the level of the input signal drops
below the threshold set by the TH input. LOS is low when the signal level is above the
threshold. LOS can be connected directly to DIS for automatic squelch.
10
ST
LOS
Negative Loss-of-Signal Output, PECL. LOS is low when the level of the input signal drops
below the threshold set by the TH input. LOS is high when the signal level is above the
threshold.
11
GNDE
Digital Supply Ground. Must be at the same potential as the GNDA pin.
12
DOUT
DOUT-
Negative Data Output, PECL. A high at DIS forces DOUT- high.
13
DOUT
DOUT+
Positive Data Output, PECL. A high at DIS forces DOUT+ low.
14
VCCE
+2.97V to +5.5V Digital Supply Voltage. Must be at the same potential as the VCCA pin.
15
NC
N.C.
No Connection
16
VSET
TH
Loss-of-Signal Threshold Pin. Resistor (RTH) to ground sets the LOS threshold. This pin cannot
be left open.
Pin Description
相關PDF資料 |
PDF描述 |
|---|---|
| VE-2TF-MW-B1 | CONVERTER MOD DC/DC 72V 100W |
| VE-BNM-MX-S | CONVERTER MOD DC/DC 10V 75W |
| SY88403BLMG TR | IC AMP LIMIT CML TTL LOS 16MLF |
| LTC2604IGN | IC DAC 16BIT QUAD R-R OUT 16SSOP |
| VE-BNL-MX-S | CONVERTER MOD DC/DC 28V 75W |
相關代理商/技術參數 |
參數描述 |
|---|---|
| MAX3645EEE+ | 功能描述:限幅放大器 2.97-5.5V 125-200Mbps RoHS:否 制造商:Micrel 輸入電壓范圍（最大值）:3.6 V 工作電源電壓:3.3 V 電源電流:40 mA 工作溫度范圍:- 40 C to + 85 C 封裝 / 箱體:MSOP-10 封裝:Tube |
| MAX3645EEE+T | 功能描述:限幅放大器 2.97-5.5V 125-200Mbps RoHS:否 制造商:Micrel 輸入電壓范圍（最大值）:3.6 V 工作電源電壓:3.3 V 電源電流:40 mA 工作溫度范圍:- 40 C to + 85 C 封裝 / 箱體:MSOP-10 封裝:Tube |
| MAX3645EEEEVKIT | 功能描述:限幅放大器 +2.97V to +5.5V 125Mbps to 200Mbps Limiting Amplifier with Loss-of-Signal Detector RoHS:否 制造商:Micrel 輸入電壓范圍（最大值）:3.6 V 工作電源電壓:3.3 V 電源電流:40 mA 工作溫度范圍:- 40 C to + 85 C 封裝 / 箱體:MSOP-10 封裝:Tube |
| MAX3645EEE-T | 功能描述:限幅放大器 2.97-5.5V 125-200Mbps RoHS:否 制造商:Micrel 輸入電壓范圍（最大值）:3.6 V 工作電源電壓:3.3 V 電源電流:40 mA 工作溫度范圍:- 40 C to + 85 C 封裝 / 箱體:MSOP-10 封裝:Tube |
| MAX3645ESE | 功能描述:限幅放大器 RoHS:否 制造商:Micrel 輸入電壓范圍（最大值）:3.6 V 工作電源電壓:3.3 V 電源電流:40 mA 工作溫度范圍:- 40 C to + 85 C 封裝 / 箱體:MSOP-10 封裝:Tube |
發布緊急采購，3分鐘左右您將得到回復。