General Description
The MAX2310/MAX2312/MAX2314/MAX2316 are IF
receivers designed for dual-band, dual-mode, and sin-
gle-mode N-CDMA and W-CDMA cellular phone sys-
tems. The signal path consists of a variable gain
amplifier (VGA) and I/Q demodulator. The devices fea-
ture guaranteed +2.7V operation, a dynamic range of
over 110dB, and high input IP3 (-33dBm at 35dB gain,
1.7dBm at -35dB).
Unlike similar devices, the MAX2310 family of receivers
includes dual oscillators and synthesizers to form a
self-contained IF subsystem. The synthesizer’s refer-
ence and RF dividers are fully programmable through a
3-wire serial bus, enabling dual-band system architec-
tures using any common reference and IF frequency.
The differential baseband outputs have enough band-
width to suit both N-CDMA and W-CDMA systems, and
offer saturated output levels of 2.7Vp-p at a low +2.75V
supply voltage. Including the low-noise voltage-con-
trolled oscillator (VCO) and synthesizer, the MAX2310
draws only 26mA from a +2.75V supply in CDMA (dif-
ferential IF) mode.
The MAX2310/MAX2312/MAX2314/MAX2316 are avail-
able in 28-pin QSOP packages.
Applications
Single/Dual/Triple-Mode CDMA Handsets
Globalstar Dual-Mode Handsets
Wireless Data Links
Tetra Direct-Conversion Receivers
Wireless Local Loop (WLL)
Features
o
Complete IF Subsystem Includes VCO and
Synthesizer
o
Supports Dual-Band, Triple-Mode Operation
o
VGA with >110dB Gain Control
o
Quadrature Demodulator
o
High Output Level (2.7V)
o
Programmable Charge-Pump Current
o
Supports Any IF Frequency Between 40MHz and
300MHz
o
3-Wire Programmable Interface
o
Low Supply Voltage (+2.7V)
M
CDMA IF VGAs and I/Q Demodulators
with VCO and Synthesizer
________________________________________________________________
Maxim Integrated Products
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
1
19-1507; Rev 1; 3/03
PART
MAX2310
EEI
MAX2312
EEI
MAX2314
EEI
MAX2316
EEI
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
TEMP RANGE
PIN-PACKAGE
28 QSOP
28 QSOP
28 QSOP
28 QSOP
Pin Configurations appear at end of data sheet.
Block Diagram appears at end of data sheet.
Ordering Information
Selector Guide
-40°C to +85°C
Single Band, Dual Mode
AMPS,
Cellular CDMA
MAX2314
Single Band, Single Mode
PCS CDMA
Dual Band, Triple Mode
AMPS,
Cellular CDMA,
PCS CDMA
MAX2310
MAX2312
DESCRIPTION
MODE
PART
Single Band, Single Mode or
Single Band, Dual Mode with
External Discriminator
Cellular CDMA
MAX2316
40MHz to 150MHz
40MHz to 150MHz
67MHz to 300MHz
40MHz to 300MHz
INPUT RANGE
EVALUATION KIT
AVAILABLE