參數資料
型號： MAX1882
廠商： Maxim Integrated Products, Inc.
元件分類： DC/DC變換器
英文描述： Quad-Output TFT LCD DC-DC Converters with Buffer
中文描述： 四路輸出、TFT LCD DC-DC轉換器，帶有緩沖器
文件頁數： 1/38頁
文件大小： 1051K
代理商： MAX1882
General Description
The MAX1778/MAX1880–MAX1885 multiple-output
DC-DC converters provide the regulated voltages
required by active matrix thin-film transistor (TFT) liquid
crystal displays (LCD) in a low-profile TSSOP package.
One high-power step-up converter and two low-power
charge pumps convert the 2.7V to 5.5V input voltage
into three independent output voltages. A built-in linear
regulator and VCOM buffer complete the power-supply
requirements.
The main step-up converter accurately generates an
externally set output voltage up to 13V that can supply
the display’s row/column drivers. The converter’s high
switching frequency and current-mode PWM architec-
ture provide fast transient response and allow the use
of small low-profile inductors and ceramic capacitors.
The low-power BiCMOS control circuitry and internal
14V switch (0.35
N-channel MOSFET) enable efficien-
cies up to 91%.
The dual low-power charge pumps (MAX1778/
MAX1880/MAX1881/MAX1882 only) independently reg-
ulate one positive output (V
POS
) and one negative out-
put (V
NEG
). These low-power outputs use external
diode and capacitor stages (as many stages as
required) to regulate output voltages up to +40V and
-40V. A unique control scheme minimizes output ripple
as well as capacitor sizes for both charge pumps.
A resistor-programmable, 40mA, low-dropout linear
regulator (MAX1778/MAX1881/MAX1883/MAX1884
only) provides preregulation or postregulation for any of
the supplies. For higher current applications, an exter-
nal transistor can be added. Additionally, the VCOM
buffer provides a high current output that is ideal for
driving the capacitive backplane of TFT LCD panels.
The VCOM buffer’s output voltage is preset with an
internal 50% resistive-divider or can be externally
adjusted for other voltages.
The MAX1778/MAX1880–MAX1885 are protected
against output undervoltage and thermal overload con-
ditions by a latched fault detection circuit that shuts
down the device. All devices are available in the ultra-
thin TSSOP package (1.1mm max height).
Applications
TFT LCD Notebook Displays
TFT LCD Desktop Monitor Panels
Features
o
500kHz/1MHz Current-Mode PWM Step-Up
Regulator
Up to +13V Main High-Power Output
±1% Accurate
High Efficiency (91%)
o
Dual Regulated Charge-Pump Outputs
(MAX1778/MAX1880/MAX1881/MAX1882 only)
Up to +40V Positive Charge-Pump Output
Up to -40V Negative Charge-Pump Output
o
Low-Dropout 40mA Linear Regulator
(MAX1778/MAX1881/MAX1883/MAX1884 only)
Up to +15V LDO Input
o
Optional Higher Current with External Transistor
o
2.7V to 5.5V Input Supply
o
Internal Supply Sequencing and Soft-Start
o
Power-Ready Output
o
Adjustable Fault-Detection Latch
o
Thermal Protection (+160°C)
o
0.1μA Shutdown Current
o
0.7mA IN Quiescent Current
o
Ultra-Small External Components
o
Thin TSSOP Package (1.1mm max height)
M
Quad-Output TFT LCD DC-DC
Converters with Buffer
________________________________________________________________
Maxim Integrated Products
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
1
19-1979; Rev 0a; 3/01
Ordering Information
PART
TEMP. RANGE
-40
°
C to +85
°
C
-40
°
C to +85
°
C
-40
°
C to +85
°
C
-40
°
C to +85
°
C
-40
°
C to +85
°
C
-40
°
C to +85
°
C
-40
°
C to +85
°
C
PIN-PACKAGE
24 TSSOP
24 TSSOP
24 TSSOP
24 TSSOP
20 TSSOP
20 TSSOP
20 TSSOP
MAX1778
EUG
MAX1880
EUG
MAX1881
EUG
MAX1882
EUG
MAX1883
EUP
MAX1884
EUP
MAX1885
EUP
Typical Operating Circuit appears at end of data sheet.
Pin Configurations and Selector Guide appear at end of
data sheet.
相關PDF資料
PDF描述
MAX1883 Quad-Output TFT LCD DC-DC Converters with Buffer
MAX1884 Quad-Output TFT LCD DC-DC Converters with Buffer
MAX1885 Quad-Output TFT LCD DC-DC Converters with Buffer
MAX1883EUP Replaced by TMS320C6211B : Fixed-Point Digital Signal Processor 256-BGA 0 to 0
MAX1884EUP Fixed-Point Digital Signal Processor 256-BGA
相關代理商/技術參數
參數描述
MAX1882EUG 功能描述:LCD 驅動器 Quad-Output TFT LCD DC-DC Converter with Buffer RoHS:否 制造商:Maxim Integrated 數位數量:4.5 片段數量:30 最大時鐘頻率:19 KHz 工作電源電壓:3 V to 3.6 V 最大工作溫度:+ 85 C 最小工作溫度:- 20 C 封裝 / 箱體:PDIP-40 封裝:Tube
MAX1882EUG-T 功能描述:LCD 驅動器 Quad-Output TFT LCD DC-DC Converter with Buffer RoHS:否 制造商:Maxim Integrated 數位數量:4.5 片段數量:30 最大時鐘頻率:19 KHz 工作電源電壓:3 V to 3.6 V 最大工作溫度:+ 85 C 最小工作溫度:- 20 C 封裝 / 箱體:PDIP-40 封裝:Tube
MAX1883EUP 功能描述:LCD 驅動器 Quad-Output TFT LCD DC-DC Converter with Buffer RoHS:否 制造商:Maxim Integrated 數位數量:4.5 片段數量:30 最大時鐘頻率:19 KHz 工作電源電壓:3 V to 3.6 V 最大工作溫度:+ 85 C 最小工作溫度:- 20 C 封裝 / 箱體:PDIP-40 封裝:Tube
MAX1883EUP-T 功能描述:LCD 驅動器 Quad-Output TFT LCD DC-DC Converter with Buffer RoHS:否 制造商:Maxim Integrated 數位數量:4.5 片段數量:30 最大時鐘頻率:19 KHz 工作電源電壓:3 V to 3.6 V 最大工作溫度:+ 85 C 最小工作溫度:- 20 C 封裝 / 箱體:PDIP-40 封裝:Tube
MAX1884EUP 功能描述:LCD 驅動器 Quad-Output TFT LCD DC-DC Converter with Buffer RoHS:否 制造商:Maxim Integrated 數位數量:4.5 片段數量:30 最大時鐘頻率:19 KHz 工作電源電壓:3 V to 3.6 V 最大工作溫度:+ 85 C 最小工作溫度:- 20 C 封裝 / 箱體:PDIP-40 封裝:Tube
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*