- 您現在的位置：買賣IC網 > PDF目錄11151 > MAX14505AEWC+T (Maxim Integrated Products)IC SWITCH DUAL SPDT 12WLP PDF資料下載
參數資料
| 型號： | MAX14505AEWC+T |
| 廠商： | Maxim Integrated Products |
| 文件頁數： | 2/12頁 |
| 文件大?。?/td> | 0K |
| 描述： | IC SWITCH DUAL SPDT 12WLP |
| 產品培訓模塊： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 標準包裝： | 2,500 |
| 功能： | 開關 |
| 電路： | 2 x SPDT |
| 電壓電源： | 單電源 |
| 電壓 - 電源，單路/雙路(±)： | 2.3 V ~ 5.5 V |
| 工作溫度： | -40°C ~ 85°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 12-WFBGA，WLCSP |
| 供應商設備封裝： | 12-WLP |
| 包裝： | 帶卷 (TR) |
MAX14504/MAX14505/MAX14505A/MAX14506
Dual SPDT Negative Rail Analog Switches
with ±VCC Capability
10
______________________________________________________________________________________
Digital Control Inputs
The MAX14504/MAX14505/MAX14505A/MAX14506
logic inputs accept up to +5.5V, regardless of supply
voltage. For example, with a +3.3V supply, CB and EN
can be driven low to GND and high to +5.5V, allowing
for mixed logic levels in a system. Using logic levels of
VIL = 0 to VIH ≥ VCC reduces supply current.
Analog Signal Levels
These devices pass signals from -VCC to +VCC with
minimal distortion and very little change in on-resistance
(see the
Typical Operating Characteristics). The switch-
es are bidirectional; therefore, the NO_, NC_, and COM_
terminals can be used as either inputs or outputs.
Click-and-Pop Suppression
The MAX14505/MAX14505A have a shunt switch on
NO1 and NO2 terminals to automatically discharge any
capacitance when they are not connected to COM1
and COM2. The shunt switch reduces audible click-
and-pop sounds that occur when switching between
capacitively coupled audio sources. Audible clicks and
pops are caused when a step DC voltage is switched
into the speaker. The DC step transients are reduced
by automatically discharging the side that is not con-
nected to the COM terminal, reducing any residual DC
voltage and reducing clicks and pops.
Applications Information
Power-Supply Sequencing
Proper power-supply sequencing is recommended for
all CMOS devices. Improper supply sequencing can
force the switch into latch-up, causing it to draw exces-
sive supply current. The only way out of latch-up is to
remove all signals and power and then reapply properly.
Connect all ground pins first, apply power to VCC, and
finally apply signals to NO_, NC_, and COM_. Follow the
reverse order upon power-down.
相關PDF資料 |
PDF描述 |
|---|---|
| VI-B6N-IX-F2 | CONVERTER MOD DC/DC 18.5V 75W |
| VI-B6N-IX-F1 | CONVERTER MOD DC/DC 18.5V 75W |
| VI-B6N-IW-F4 | CONVERTER MOD DC/DC 18.5V 100W |
| MAX4736EGC+T | IC SWITCH DUAL SPDT 12QFN |
| MAX4734EGC+T | IC MULTIPLEXER 4X1 12QFN |
相關代理商/技術參數 |
參數描述 |
|---|---|
| MAX14505EWC+T | 功能描述:模擬開關 IC Dual SPDT Neg Rail w/ +/-VCC Cap RoHS:否 制造商:Texas Instruments 開關數量:2 開關配置:SPDT 開啟電阻（最大值）:0.1 Ohms 切換電壓（最大）: 開啟時間（最大值）: 關閉時間（最大值）: 工作電源電壓:2.7 V to 4.5 V 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:DSBGA-16 |
| MAX14506EWC+T | 制造商:Maxim Integrated Products 功能描述:DUAL SPDT NEGATIVE RAIL ANALOG SWITCH WITH ?VCC CAPABILITY - Tape and Reel |
| MAX14508EEVB+ | 功能描述:IC USB SWITCH DPDT 10UTQFN RoHS:是 類別:集成電路 (IC) >> 接口 - 模擬開關，多路復用器，多路分解器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:36 系列:- 功能:多路復用器 電路:2 x 4:1 導通狀態(tài)電阻:75 歐姆 電壓電源:單/雙電源 電壓 - 電源，單路/雙路(±):2 V ~ 12 V，±2 V ~ 6 V 電流 - 電源:- 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:20-SOIC（0.295"，7.50mm 寬） 供應商設備封裝:20-SOIC W 包裝:管件 |
| MAX14508EEVB+T | 功能描述:交換機 IC 開發(fā)工具 USB 2.0 Hi-Speed Audio Switches RoHS:否 制造商:Maxim Integrated 產品:Evaluation Kits 類型:USB Power Switches 工具用于評估:MAX4984E 工作電源電壓:2.8 V to 5.5 V |
| MAX14508EEVKIT+ | 制造商:Maxim Integrated Products 功能描述:MAX14508E+ EVAL KIT - Boxed Product (Development Kits) |
發(fā)布緊急采購，3分鐘左右您將得到回復。