參數資料
型號： M37733MHBXXXFP
元件分類： 微控制器/微處理器
英文描述： 16-BIT, MROM, 25 MHz, MICROCONTROLLER, PQFP80
封裝： 14 X 20 MM, 0.80 MM PITCH, PLASTIC, QFP-80
文件頁數： 60/90頁
文件大?。?/td> 1790K
代理商： M37733MHBXXXFP
62
MITSUBISHI MICROCOMPUTERS
M37733MHBXXXFP
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
PRELIMINARY
Notice:
This
is not
a final
specification.
Some
parametric
limits
are
subject
to change.
The wait/stop state is terminated by interrupt acceptance or reset.
Accordingly, it is necessary to prepare the state in which any interrupt
can be accepted before the WIT/STP instruction is executed.
Additionally, it is necessary to set the system clock stop bit at wait
state before the WIT instruction is executed.
When the WIT/STP instruction is executed in a bus access cycle, the
bus enters the non-access state (E is at “H”) because internal clock
φ (or oscillation) is stopped after the read/write in this cycle is finished.
Pins P00/A0 to P33/HLDA normally retain the state at which internal
clock
φ is stopped in the wait/stop state.
However, only in the memory expansion mode and the microprocessor
mode, arbitrary data which is set in the port P0 to P3 latches can be
output from pins P00/A0 to P33/HLDA even at the wait/stop state when
the following conditions are satisfied before the WIT/STP instruction
execution.
The standby state selection bit (bit 0 of the port function control
register) is set to “1”.
“FF16” is set into the port P0 to P3 direction registers.
Furthermore, when the standby state selection bit is set to “1” and bit
6 of the oscillation circuit control register 0 (signal output disable
selection bit) is set to “1”, “L” level can be output from the E pin at the
wait/stop state. For the signal output disable selection bit, refer to
Table 7 on the processor mode section.
Note that the function of arbitrary data output cannot be emulated
using a debugger.
相關PDF資料
PDF描述
M37733MHLXXXHP 16-BIT, MROM, 12 MHz, MICROCONTROLLER, PQFP80
M37735EHBXXXFP 16-BIT, OTPROM, 25 MHz, MICROCONTROLLER, PQFP80
M37735EHBFS 16-BIT, UVPROM, 25 MHz, MICROCONTROLLER, CQCC80
M37735EHLXXXHP 16-BIT, OTPROM, 12 MHz, MICROCONTROLLER, PQFP80
M37735MHBXXXFP 16-BIT, MROM, 25 MHz, MICROCONTROLLER, PQFP80
相關代理商/技術參數
參數描述
M37733MHL 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M37733MHLXXXHP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M37733S4 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:16-BIT CMOS MICROCOMPUTER
M37733S4BFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:16-BIT CMOS MICROCOMPUTER
M37733S4LHP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:16-BIT CMOS MICROCOMPUTER
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*