參數資料
型號： M37545G8-XXXGP
元件分類： 微控制器/微處理器
英文描述： 8-BIT, MROM, 4 MHz, MICROCONTROLLER, PQFP32
封裝： 7 X 7 MM, 0.80 MM PITCH, PLASTIC, LQFP-32
文件頁數： 29/65頁
文件大?。?/td> 782K
代理商： M37545G8-XXXGP
Rev.1.07
Mar 19, 2009
Page 33 of 60
REJ03B0140-0107
7545 Group
Fig. 32 Setting of carrier wave control by software
0 X X 0 0X 1 X
b7
b0
0 0 0 0 0 X1 X
b7
b0
1
0 0 0 0 X X XX
b7
b0
2
X X X X X X XX
b7
b0
X X X X X X XX
b7
b0
4
0 X X 0 0 0 1X
b7
b0
3
0 0 0 0 0 X0 X
b7
b0
5
6
9
0 X X 0 00 1 X
b7
b0
7
0 0 0 0 0 X1 X
b7
b0
8
0 X X 00 00 X
b7
b0
10
P42/CARR pin output
Carrier waveform
(Timer 2 output)
Software carrier wave output bit
Waveform output timing of remote-control waveform by software carrier waveform output bit
Set “1” to bit 1 to stop counting of timer 2.
Timer 1, 2, 3 control register TC123 (2B16)
Set “0” to bit 1 to start counting of timer 2.
Carrier wave control register, CARCNT (2716)
Timer 1, 2, 3 control register TC123 (2B16)
Set “1” to bit 1 to stop counting of timer 2.
Carrier wave control register, CARCNT (2716)
Timer count source set register TCSS (2A16)
Set timer 2 count source to bit 0 and bit 1. Also, in order to initialize
carrier waveform circuit, be sure to select f(XIN)/16, f(XIN)/2 or f(XIN)/8
for timer 3 count source.
Do not select carrier waveform output (b3b2=112) for timer 3 count source.
Carrier wave control register, CARCNT (2716)
Timer 2 secondary T2S (2D16)
Timer 2 primary T2P (2C16)
Set carrier wave “H”, “L” duration to timer 2 primary and timer 2 secondary, respectively.
(when 455 kHz carrier waveform generating mode is used,
this setting is not necessary.)
Waveform output of remote-control
Start (initial state after reset)
Timer 1, 2, 3 control register TC123 (2B16)
Generating waveform or not can be controlled by
bit 2: Software carrier waveform output bit
In order to stop carrier waveform,
set bit 2: Software carrier waveform output bit to “0: Output invalid”.
X: Set it to “0” or “1” arbitrary.
When the carrier wave output circuit operation is started again,
execute the setting from the processing No.4 .
In order to change the carrier wave control from the auto-control by timer 3
to software carrier wave output, initialize the carrier wave circuit
by setting “0” to “bit 1: carrier wave output valid bit”.
Set carrier wave control register.
bit 0: Set whether to expand waveform.
bit 1: Select “1: Carrier waveform generating function is valid”
bit 2: Select “0: Software output is invalid”
bit 3: Select “0: auto-control by timer 3 is invalid.
bit 4: Select “0: carrier waveform output trigger is invalid”
bit 5: Select whether 455 kHz carrier waveform generating mode is valid or invalid.
bit 6: Set output level of waveform.
bit 7: Set this bit to “0”.
相關PDF資料
PDF描述
M37546G2-XXXSP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PDIP32
M37546G2HP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PQCC36
M37546G4-XXXHP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PQCC36
M37546G2-XXXGP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PQFP32
M37546G4-XXXGP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PQFP32
相關代理商/技術參數
參數描述
M37545GCGP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37545GCKP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37545GC-XXXGP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37545GFGP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37545GFKP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*