參數資料
型號： M37536E8SP
元件分類： 微控制器/微處理器
英文描述： 8-BIT, OTPROM, 6 MHz, MICROCONTROLLER, PDIP42
封裝： 0.600 INCH, 1.78 MM PITCH, PLASTIC, SDIP-42
文件頁數： 28/46頁
文件大小： 660K
代理商： M37536E8SP
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
7536 Group
MITSUBISHI MICROCOMPUTERS
33
Fig. 40 External circuit of ceramic resonator
Fig. 41 External clock input circuit
Fig. 42 Structure of MISRG
Clock Generating Circuit
An oscillation circuit can be formed by connecting a resonator be-
tween XIN and XOUT.
Use the circuit constants in accordance with the resonator
manufacturer's recommended values. No external resistor is needed
between XIN and XOUT since a feed-back resistor exists on-chip.
qOscillation control
For the details of the state and release of stop mode and wait mode,
refer to “Stop mode” and “Wait mode” of “FUNCTIONAL DESCRIP-
TION SUPPLEMENT”.
Stop mode
When the STP instruction is executed, the internal clock
φ stops at
an “H” level and the XIN oscillator stops. At this time, timer 1 is set to
“0116” and prescaler 12 is set to “FF16” when the oscillation
stabilization time set bit after release of the STP instruction is “0”.
On the other hand, timer 1 and prescaler 12 are not set when the
above bit is “1”. Accordingly, set the wait time fit for the oscillation
stabilization time of the oscillator to be used.
f(XIN)/16 is forcibly connected to the input of prescaler 12.
When an external interrupt is accepted, oscillation is restarted but
the internal clock
φ remains at “H” until timer 1 underflows. As soon
as timer 1 underflows, the internal clock
φ is supplied. This is
because when a ceramic oscillator is used, some time is required
until a start of oscillation.
In case oscillation is restarted by reset, no wait time is generated.
______
So apply an “L” level to the RESET pin while oscillation becomes
stable.
Wait mode
If the WIT instruction is executed, the internal clock
φ stops at an
“H” level, but the oscillator does not stop. The internal clock
φ re
starts if a reset occurs or when an interrupt is received.
Since the oscillator does not stop, normal operation can be started
immediately after the clock is restarted.
To ensure that interrupts will be received to release the STP or WIT
state, interrupt enable bits must be set to “1” before the STP or
WIT instruction is executed.
When the STP status is released, prescaler 12 and timer 1 will start
counting with the f(XIN)/16, so set the timer 1 interrupt enable bit to
“0” before the STP instruction is executed.
Note
For use with the oscillation stabilization time set bit after release of
the STP instruction set to “1”, set values in timer 1 and prescaler
12 after fully appreciating the oscillation stabilization time of the
oscillator to be used.
Clock mode
Operation is started by a built-in ring oscillator after releasing reset.
A division ratio (1/1,1/2,1/8) is selected by setting bits 7 and 6 of the
CPU mode register after releasing it.
XIN
COUT
CIN
XOUT
XIN
XOUT
External oscillation
circuit
VCC
VSS
Open
MISRG(Address 003816)
b7
b0
Oscillation stabilization time set bit after
release of the STP instruction
0: Set "0116" in timer1, and "FF16"
in prescaler 12 automatically
1: Not set automatically
Reserved bits (return “0” when read)
(Do not write “1” to these bits)
Not used (return “0” when read)
相關PDF資料
PDF描述
M37540E8FP 8-BIT, OTPROM, 4 MHz, MICROCONTROLLER, PDSO36
M37540M4T-XXXGP 8-BIT, MROM, 4 MHz, MICROCONTROLLER, PQFP32
M37540E2FP 8-BIT, OTPROM, 4 MHz, MICROCONTROLLER, PDSO36
M37540E8SP 8-BIT, OTPROM, 4 MHz, MICROCONTROLLER, PDIP32
M37540E8V-XXXGP 8-BIT, OTPROM, 4 MHz, MICROCONTROLLER, PQFP32
相關代理商/技術參數
參數描述
M37536M4 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37536M4-XXXSP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37536RSS 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37540E2FP 功能描述:IC 740 MCU OTP 8K 32LQFP RoHS:否 類別:集成電路 (IC) >> 嵌入式 - 微控制器， 系列:740/38000 產品培訓模塊:MCU Product Line Introduction XMEGA Introduction AVR XMEGA USB Connectivity 標準包裝:90 系列:AVR® XMEGA 核心處理器:AVR 芯體尺寸:8/16-位 速度:32MHz 連通性:I²C，IrDA，SPI，UART/USART 外圍設備:欠壓檢測/復位，DMA，POR，PWM，WDT 輸入/輸出數:50 程序存儲器容量:192KB（96K x 16） 程序存儲器類型:閃存 EEPROM 大小:4K x 8 RAM 容量:16K x 8 電壓 - 電源 (Vcc/Vdd):1.6 V ~ 3.6 V 數據轉換器:A/D 16x12b; D/A 2x12b 振蕩器型:內部 工作溫度:-40°C ~ 85°C 封裝/外殼:64-TQFP 包裝:托盤 配用:ATSTK600-RC14-ND - STK600 SOCKET/ADAPTER 64TQFPATSTK600-TQFP64-ND - STK600 SOCKET/ADAPTER 64-TQFPATAVRONEKIT-ND - KIT AVR/AVR32 DEBUGGER/PROGRMMRATAVRISP2-ND - PROGRAMMER AVR IN SYSTEM
M37540E2GP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:8-BIT CISC SINGLE-CHIP MICROCOMPUTER 740 FAMILY / 740 SERIES
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*