參數資料
型號： M37281MFH-XXXSP
元件分類： 微控制器/微處理器
英文描述： 8-BIT, MROM, 8.1 MHz, MICROCONTROLLER, PDIP52
封裝： 0.600 INCH, 1.78 MM PITCH, PLASTIC, SDIP-52
文件頁數： 151/172頁
文件大?。?/td> 1319K
代理商： M37281MFH-XXXSP
M37281MAH–XXXSP,M37281MFH–XXXSP,M37281MKH–XXXSP, M37281EKSP
Rev.1.01
2003.07.16
page 8 of 170
Table 7.2 Pin Description (continued)
Note : Port Pi (i = 0 to 3) has the port Pi direction register (address 00C116 of zero page) which can be used to program each bit as an input (“0”) or an output (“1”).
The pins programmed as “1” in the direction register are output pins. When pins are programmed as “0,” they are input pins. When pins are programmed as
output pins, the output data are written into the port latch and then output. When data is read from the output pins, the output pin level is not read but the data
of the port latch is read. This allows a previously-output value to be read correctly even if the output “L” voltage has risen, for example, because a light emitting
diode was directly driven. The input pins float, so the values of the pins can be read. When data is written into the input pin, it is written only into the port latch,
while the pin remains in the floating state.
Input/
Output
Output port P5
OSD output
Input port P6
Clock input for OSD
Clock output for OSD
Sub-clock input
Sub-clock output
Input port P7
Input for data
slicer
Serial I/O data input
I/O for data slicer
Analog input
HSYNC input
VSYNC input
Port P5 is a 4-bit output port. The output structure is CMOS output.
Pins P52–P55 are also used as OSD output pins R/R1, G/G1, B/B1, OUT1 respectively. At
R, G, B output, the output structure is analog output. At R1, G1, B1 and OUT1 output, the
output structure is CMOS output.
Ports P63 and P64 are 2-bit input port.
Pin P63 is also used as OSD clock input pin OSC1.
Pin P64 is also used as OSD clock output pin OSC2. The output structure is CMOS output.
Pin P63 is also used as sub-clock input pin XCIN.
Pin P64 is also used as sub-clock output pin XCOUT. The output structure is CMOS output.
Ports P70–P72 are 3-bit input port.
Pins P70, P71 are also used as data slicer input pins CVIN, VHOLD respectively. When using
data slicer, input composite video signal through a capacitor. Connect a capacitor between
VHOLD and VSS.
Pins P72 is also used as serial I/O data input pin SIN.
When using data slicer, connect a filter using of a capacitor and a resistor between HLF and
VSS.
This is an analog input pin AD6 .
This is a horizontal synchronous signal input for OSD.
This is a vertical synchronous signal input for OSD.
Pin
Name
Functions
Output
Input
Output
Input
Output
Input
I/O
Input
P70/CVIN,
P71/VHOLD,
P72/(SIN)
HLF/AD6
HSYNC
VSYNC
P63/OSC1/
XCIN,
P64/OSC2/
XCOUT
P52/R/R1,
P53/G/G1,
P54/B/B1,
P55/OUT1
相關PDF資料
PDF描述
M37281MAH-XXXSP 8-BIT, MROM, 8.1 MHz, MICROCONTROLLER, PDIP52
M37281EKSP 8-BIT, OTPROM, 8.1 MHz, MICROCONTROLLER, PDIP52
M37281MFH-XXXSP 8-BIT, MROM, 8.1 MHz, MICROCONTROLLER, PDIP52
M37281MAH-XXXSP 8-BIT, MROM, 8.1 MHz, MICROCONTROLLER, PDIP52
M37281MKH-XXXSP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PDIP52
相關代理商/技術參數
參數描述
M37281MKH-XXXSP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER and ON-SCREEN DISPLAY CONTROLLER
M372899234 制造商:ITW Switches 功能描述:IN-RUSH
M372F3200DJ3-C 制造商:SAMSUNG 制造商全稱:Samsung semiconductor 功能描述:32M x 72 DRAM DIMM with ECC Using 16Mx4, 4K & 8K Refresh, 3.3V
M372F3280DJ3-C 制造商:SAMSUNG 制造商全稱:Samsung semiconductor 功能描述:32M x 72 DRAM DIMM with ECC Using 16Mx4, 4K & 8K Refresh, 3.3V
M3731 制造商:未知廠家 制造商全稱:未知廠家 功能描述:4 SIRENS & MACHINE GUN 2 LEDS BLINKING
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*