![](http://datasheet.mmic.net.cn/30000/M34518M4-XXXFP_datasheet_2359507/M34518M4-XXXFP_16.png)
ML610Q411/ML610Q412/ML610Q415 User’s Manual
Chapter 1
Overview
1 – 1
1.
Overview
1.1
Features
This LSI is a high-performance 8-bit CMOS microcontroller into which rich peripheral circuits, such as synchronous
serial port, UART, I
2C bus interface (master), buzzer driver, battery level detect circuit, RC oscillation type A/D
converter, 12-bit successive approximation type A/D converter, and LCD driver, are incorporated around
8-bit CPU
nX-U8/100.
The CPU nX-U8/100 is capable of efficient instruction execution in 1-intruction 1-clock mode by 3-stage pipe line
architecture parallel procesing. The Flash ROM that is installed as program memory achieves low-voltage low-power
consumption operation (read operation) equivalent to mask ROM and is most suitable for battery-driven applications.
The on-chip debug function that is installed enables program debugging and programming.
CPU
8-bit RISC CPU (CPU name: nX-U8/100)
Instruction system: 16-bit instructions
Instruction set:
Transfer, arithmetic operations, comparison, logic operations, multiplication/division, bit
manipulations, bit logic operations, jump, conditional jump, call return stack manipulations,
arithmetic shift, and so on
On-Chip debug function
Minimum instruction execution time
30.5
s (@32.768 kHz system clock)
2
s (@500kHz system clock)
Internal memory
Internal 16KByte Flash ROM (8K×16 bits) (including unusable 1KByte TEST area)
Internal 1KByte Data RAM (1024×8 bits)
Interrupt controller
2 non-maskable interrupt sources
Internal source: 1 (Watch dog timer)
External source: 1 (NMI)
19 maskable interrupt sources
Internal sources: 15 (SSIO, SA-A/D converter, I2C, Timer0, Timer1, Timer2, Timer3, 1kHz timer, UART,
RC-A/D converter, PWM, TBC128Hz, TBC32Hz, TBC16Hz, TBC2Hz)
External sources: 4 (P00, P01, P02, P03)
Time base counter
Low-speed time base counter ×1 channel
Frequency compensation (Compensation range: Approx.
488ppm to +488ppm. Compensation accuracy: Approx.
0.48ppm, applied to ML610Q411/Q412)
High-speed time base counter ×1 channel
Watchdog timer
Non-maskable interrupt and reset
Free running
Overflow period: 4 types selectable
ML610Q411/Q412: 125ms, 500ms, 2s, and 8s
ML610Q415: approx. 131ms, 524ms, 2.1s, 8.4s
Timers
8 bits × 4 channels (Timer0-3: 16-bit x 2 configuration available by using Timer0-1 or Timer2-3)
Clock frequency measurement mode (in one channel of 16-bit configuration using Timer2-3, ML610Q415 does
not have this mode)